MATERIAL SAFETY DATA SHEET
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name INK TYPE UVN
409
MSDS Number
ITW TRANS TECH
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000
2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
EPOXI- AND ACRYLOCRYLATES Trade Secret 45 - 50 % ND
N-BUTYL ACETATE 123-86-4 20 - 25 % OSHA PELs: 950 mg/m3
ACGIH TLV: n.av.
PHOTOMERCHEMICALS Trade Secret 5 - 10 % NA
HEXANDIOLDIOCRYLATE 13048-33-4 5 - 10 %
TETRAETHYLEN GLYCOL DIACRYLATE Trade Secret 1-5% NA
3 HAZARDS IDENTIFICATION
Signs & Symptoms of Short-Term (Acute) Exposure
Excessive vapor concentration in air, especially in confined spaces, may cause asphyxiation. Excessive inhalation of
vapors can cause nasal, throat and respiratory irritation, dizziness, weakness, fatigue, nausea, headache and possible
unconsciousness. Eye contact causes irritation, redness, tearing, blurred vision. Eye contact with liquid or vapor causes
severe irritation, redness, tearing, blurred vision. Vapors may cause severe eye irritation, redness, tearing and blurred
vision. Prolonged skin contact may lead to extraction of natural oils with resultant dry skin, cracking, irritation and dermititis.
Swallowing may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Notice: intentional misuse by deliberately
concentrating and inhaling the contents maybe harmful or fatal. Reports have associated repeated and prolonged
occupational overexposure to solvents with permanent brain and nervous system damage.
Effects of Long-Term (Chronic) Exposure
Health studies have shown that many solvents pose potential human health risks which may vary from person to person.
As a precaution, exposure to liquids and vapors should be minimized. -Prolonged or continuous inhalation of vapors may
result in delayed lung damage. Repeated or prolonged inhalation of vapor may cause liver and kidney damage. -Repeated
inhalation of vapor in high concentration can change the blood picture.
4 FIRST AID MEASURES
Skin
Wash away with soap and water and rinse. Do not use solvents or thinners.
Eye
Remove contact lenses, keep eyelids open. Keep eyelids lifted. Flush with water for 15 minutes. Call a physician.
Printed On 24-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
409 INK TYPE UVN
Material Id Trade Name 1/ 4
Inhalation
Take the casualty into the fresh air and keep warm. Irregular breathing/no breathing: artificial respiration. Call a
physician.
Ingestion
Do not induce vomiting. Call a physician. Keep at rest.
Medical Conditions Aggravated by Exposure
This product is unlikely to harm health, given normal and proper handling and hygienic precautions. Prolonged inhalation of
vapors in high concentrations may lead to headache, giddiness and nausea. In case of contact with the product danger of
resorption through the skin, irritation of skin/mucous membranes.
5 FIRE FIGHTING MEASURES
Extinguishing Media
Alcohol resistant foam, co2, powders, water spray. Not to be used: waterjet.
Basic Fire Fighting Procedures
Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard.
Unusual Fire & Explosion Hazards
Cool endangered containers with water in case of fire. Do not allow the quenching water into the sewage system. Do not
allow the quenching water into the sewage system. Vapors are heavier than air and may spread along floors. Vapors may
form explosive mixtures with air. Preparation may charge electrostatically. Always use earthing leads when transferring
from one container to another. Operators should wear antistatic footwear and clothing. No sparking tools should be used.
32 C
Flash Point
0.8
Flammability Limits in Air, Lower, % by Volume
6 ACCIDENTAL RELEASE MEASURES
Environmental Precautions
Do not empty into drains. If the product contaminates lakes, rivers or sewer systems, inform appropriate authorities in
accordance with local regulations.
Spill or Leak Procedure
Remove all sources of ignition. Provide for good ventilation or respiratory. Contain and collect spillage with non-combustible
absorbent materials, e.g., sand, earth, vermiculite, diatomaceous earth and place in container for disposal according to
local regulations. Clean preferably with a detergent; avoid use of solvents.
7 HANDLING & STORAGE
Handling
Prevent the creation of flammable or explosive concentration of vapor in air and avoid vapor concentration higher than the
occupational exposure limits. Additionally, the product should only be used in areas from which all naked lights and other
sources of ignition have been excluded. Comply with the health and safety at work laws.
Storage
Containers which are opened must be carefully resealed and kept upright to prevent leakage. Keep container closed. Never
use pressure to empty: container is not a pressure vessel. No smoking. Prevent unauthorized access.
Ventilation
Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use of local exhaust
ventilation and good general extraction. If these are not sufficient to maintain concentrations of particles and solvent vapor
below the OEL, suitable respiratory protection must be worn.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Respiratory Protection: Personal Protection Equipments (PPE)
Appropriate breathing apparatus may be required.
Printed On 24-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
409 INK TYPE UVN
Material Id Trade Name 2/ 4
General
In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious
person. Unconsciousness: Lateral position - call a physician.
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Colored paste w/ordor of organic solvents
124 C
Boiling Point
>1
Specific Gravity
13 (mm 11g) hPa
Vapor Pressure
>1
Vapor Density
Partially
Solubility In Water
10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable under recommended storage and handling conditions. Keep away from oxidizing agents, strongly alkaline and
strongly acid materials in order to avoid exothermic reactions.
Hazardous Reactions/Decomposition Products
When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and
dioxide, smoke, oxides of nitrogen.
11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Inhalation, ingestion, skin and eye contact.
12 ECOLOGICAL INFORMATION
13 DISPOSAL CONSIDERATIONS
Waste Disposal
According to local, state and federal regulations (incinaration).
14 TRANSPORT INFORMATION
Department of Transportation (DOT) Requirements:
General Transportation Information for Bulk Shipments
Proper Shipping Name Printing Ink
Hazard Class 3 UN/NA Code 1210
Packaging Group Class III
Labels Required Flammable Liquid
15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 1 Flammability 3 Reactivity 1 Personal Prot. Equip. C
Printed On 24-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
409 INK TYPE UVN
Material Id Trade Name 3/ 4
16 OTHER INFORMATION
Disclaimer
This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of ITW
Trans Tech. The data on this sheet applies only to the specific material designated herein. ITW Trans Tech. assumes no
legal responsibility for use of reliance upon this data.
6/24/2008 9/26/2007
Replaces Sheet Dated
Completed On
Completed By
Printed On 24-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
409 INK TYPE UVN
Material Id Trade Name 4/ 4
|