Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

112-07-2
110-91-8

File Name: itwtranstech_com---thinner_bga_00.asp
                                   MATERIAL SAFETY DATA SHEET


1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name THINNER BGA/00

TRANS TECH AMERICA, INC.
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA

Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000

2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
BUTYLGLYCOLACETATE 112-07-2 95 - 100 % N/A
MORPHOLINE 110-91-8 1-5% ND


3 HAZARDS IDENTIFICATION
Emergency Overview
Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Reports have associated
repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. This
product is unlikely to harm health, given normal and proper handling and hygienic precautions. Prolonged inhalation of
vapors in high concentrations may lead to headache, giddiness and nausea. In case of contact with the product: danger
of resorption through the skin, irritation of skin/mucous membranes.

Potential Health Effects, Skin
Prolonged skin contact may lead to extraction of natural oils, with resultant dry skin, cracking, irritation and dermatitis.

Potential Health Effects, Eye
Eye contact causes irritation, redness, tearing, blurred vision. Eye contact with liquid or vapor causes severe irritation,
redness, tearing, blurred vision. Vapors may cause severe eye irritation, redness, tearing and blurred vision.

Potential Health Effects, Inhalation
Excessive inhalation of vapors can cause nasal, throat and respiratory irritation, dizziness, weakness, fatigue, nausea,
headache and possible unconsciousness. Excessive vapor concentration in air, especially in confined spaces, may cause
asphyxiation.

Potential Health Effects, Ingestion
Swallowing may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Effects of Long-Term (Chronic) Exposure
Health studies have shown that many solvents pose potential human health risks which may vary from person to person.
As a precaution, exposure to liquids and vapors should be minimized. Repeated or prolonged inhalation of vapor may
cause liver and kidney damage. Repeated inhalation of vapor in high concentration can change the blood picture.
Prolonged or continuous inhalation of vapors may result in delayed lung damage.




Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
491 THINNER BGA/00
Material Id Trade Name 1/ 4
4 FIRST AID MEASURES
Skin
Wash away with soap and water and rinse. DO NOT use solvents or thinners.

Eye
Rinse immediately with plenty of water for 10-15 minutes and seek medical advice. Remove contact lenses, keep eyelids
open. Call a physician.

Inhalation
Remove to fresh air and keep warm. Give artificial respiration if not breathing. Call a physician.

Ingestion
Do not induce vomiting and seek immediate medical attention. Keep at rest. Never give anything by mouth to an
unconscious person. Unconsciousness: lateral position - call a physician. In all cases of doubt, or when symptoms persist,
seek medical attention.


5 FIRE FIGHTING MEASURES
Extinguishing Media
Suitable: alcohol resistant foam, CO2, powders, water spray.
Not suitable: water jet

Basic Fire Fighting Procedures
Appropriate breathing apparatus may be required. Fire will produce dense black smoke. Exposure to decomposition
products may cause a health hazard.
Do not allow the quenching water into the sewage system.
Cool endangered containers with water in case of fire.
78 掳 C
Flash Point
1.7
Flammability Limits in Air, Lower, % by Volume
8.4
Flammability Limits in Air, Upper, % by Volume


6 ACCIDENTAL RELEASE MEASURES
Emergency Action
Do not empty into drain. If the product contaminates lakes, rivers or sewages, inform appropriate authorities in accordance
with local regulations. Contain and collect spillage with non-combustible absorbent materials, e.g. sand, earth, vermiculite,
diatomaceous earth and place in container for disposal according to local regulations. Clean preferably with a detergent.
Avoid use of solvents.

Spill or Leak Procedure
Ventilate the area. Remove sources of ignition


7 HANDLING & STORAGE
Handling
Prevent the creation of flammable or explosive concentrations of vapor in air and avoid vapor concentration higher than the
occupational exposure limits. Additionally, the product should only be used in areas from which all naked lights and other
sources of ignition have been excluded. Comply with the health and safety at work laws.

Storage
Keep away from oxidizing agents, from strongly alkaline and strongly acid materials. Containers which are opened must be
carefully resealed and kept upright to prevent leakage. Keep container tightly closed. Never use pressure to empty:
container is not a pressure vessel. No smoking. Prevent unauthorized access.

Ventilation
Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use of local exhaust
ventilation and good general extraction. If these are not sufficient to maintain concentrations of particles and solvent vapor
below the OEL, suitable respiratory protection must be worn.


Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
491 THINNER BGA/00
Material Id Trade Name 2/ 4
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye Protection: Personal Protection Equipments (PPE)
Wear safety glasses.

Skin Protection: Personal Protection Equipments (PPE)
After washing hands, replace lost skin fat by fat containing skin creams. Use protective gloves.

Respiratory Protection: Personal Protection Equipments (PPE)
If workplace limits are exceeded, a gas mask approved for this particular job must be worn.

General
Personal should wear antistatic clothings made of natural fiber or of high temperature resistant synthetics fiber. All parts of
the body should be washed after contact.


9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Clear liquid with odor of organic solvents.
184 - 195 掳 C
Boiling Point
0.94
Specific Gravity
n.a.
Melting Point
100 %
Percent Volatile
0.04
Vapor Pressure
n.a.
Evaporation Rate
>1
Vapor Density
NO
Solubility In Water


10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable under recommended storage and handling conditions. Keep away from oxidizing agents, strongly alkaline and
strongly acid materials in order to avoid exothermic reactions.

Hazardous Reactions/Decomposition Products
When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and
dioxide, smoke, oxides of nitrogen.


11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Inhalation, skin contact, eye contact, ingestion


12 ECOLOGICAL INFORMATION

13 DISPOSAL CONSIDERATIONS
Waste Disposal
According to state and local regulations.


14 TRANSPORT INFORMATION

15 REGULATORY INFORMATION

Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
491 THINNER BGA/00
Material Id Trade Name 3/ 4
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 1 Flammability 2 Reactivity 1 Personal Prot. Equip. C


16 OTHER INFORMATION
Disclaimer
The details in this material safety data sheet satisfy national legislation. However, we have no knowledge or control over
the individual user's working conditions. The product may not be used for any purpose other than that specified in the
product data sheet unless written consent has been obtained. The user is responsible for the observance of all required
statutory provisions.

6/22/2001 Replaces Sheet Dated
Completed On
TRANS TECH AMERICA, INC.
Completed By




Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
491 THINNER BGA/00
Material Id Trade Name 4/ 4

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
itwtranstech_com---ink_tf_z_printing_medium_hd.asp N/A
itwtranstech_com---ink_th_nt.asp 112-07-2 1330-20-7 71-36-3 108-65-6
itwtranstech_com---ink_tpl_part1.asp 108-65-6 64742-95-6 25551-13-7 103-65-1 872-50-4 64742-82-1 112-07-2
itwtranstech_com---ink_tpr_part1.asp 123-42-2 112-07-2 64742-95-6 25551-13-7 108-94-1 7397-62-8 4435-53-4 108-65-6 64742-82-1 1330-20-7
itwtranstech_com---ink_tpu____part_2.asp 1330-20-7 100-41-4 95-63-6 96-63-5 14038-43-8
itwtranstech_com---ink_up82.asp 112-07-2 108-65-6 108-94-1 95-63-6 025036-25-3
itwtranstech_com---ink_up82gl.asp 112-07-2 108-65-6 108-94-1 95-63-6 025036-25-3
itwtranstech_com---ink_upp.asp 64742-95-6 1330-20-7 108-65-6 64742-94-5 25551-13-7 103-65-1
itwtranstech_com---ink_uva.asp 123-86-4 1330-20-7 108-65-6 108-94-1
itwtranstech_com---ink_uvab.asp 123-86-4
itwtranstech_com---ink_uvc.asp N/A
itwtranstech_com---ink_uve.asp N/A
itwtranstech_com---ink_uvg.asp 123-86-4 1330-20-7 108-65-6 108-94-1
itwtranstech_com---ink_uvhc.asp 3524-68-3 123-86-4 64742-95-6 75980-60-8 7727-43-7 7473-98-5
itwtranstech_com---ink_uvh_280_ta_hardcoat.asp 108-88-3 1330-20-7 107-98-2
itwtranstech_com---ink_uvh_c300_4_clear_base.asp 108-88-3
itwtranstech_com---ink_uvi.asp N/A
itwtranstech_com---ink_uvm.asp 123-86-4
itwtranstech_com---ink_uvn.asp 123-86-4 13048-33-4
itwtranstech_com---ink_uv_2005_ver-5.asp 64742-95-6 7727-43-7 75980-60-8 123-86-4
itwtranstech_com---ink_u_nt.asp 123-42-2 108-94-1 108-65-6 70657-70-4 123-86-4 112-07-2
itwtranstech_com---ink_w_nt.asp 108-65-6 70657-70-4 108-94-1 112-07-2 1330-20-7
itwtranstech_com---ink_w_nt_sp.asp 108-65-6 70657-70-4 108-94-1 112-07-2 1330-20-7
itwtranstech_com---ink_yn.asp 108-94-1 112-07-2 64742-95-6 108-65-6
itwtranstech_com---inx_off_hand_cleaner.asp N/A
itwtranstech_com---matt_agent_hk1_cashew.asp 108-88-3
itwtranstech_com---pad_cleaner.asp 64-17-5 67-56-1 108-10-1 67-63-0
itwtranstech_com---phosphorescent_pigment.asp 68611-70-1
itwtranstech_com---polymer_cliche_material.asp 79-06-1
itwtranstech_com---retarder_pn.asp 111-77-3
itwtranstech_com---retarder_sv_1.asp 7397-62-8
itwtranstech_com---retarder_sv_5.asp 78-59-1
itwtranstech_com---retarder_tpd.asp 112-15-2 64742-94-5 64742-95-6 64742-47-8 95-63-6 108-67-8 91-20-3
itwtranstech_com---retarder_vz.asp 112-34-5
itwtranstech_com---retarder_vz_40.asp 112-15-2
itwtranstech_com---retarder_vz_nk.asp 64742-94-5 25551-13-7 1330-20-7 98-82-8 95-63-6
itwtranstech_com---silicone_adhesive.asp 4253-34-3 7631-86-9 17689-77-9
itwtranstech_com---silicone_rubber_qual3_1of2.asp 14808-60-7
itwtranstech_com---silicone_rubber_qual3_2of2.asp N/A
itwtranstech_com---silver_paste_b_79.asp 1330-20-7 98-82-8 108-67-8
itwtranstech_com---syntheticcleanerinkremover.asp 107-98-2
itwtranstech_com---teflon_powder_slip_agent.asp N/A
itwtranstech_com---thinner_412.asp N/A
itwtranstech_com---thinner_aga.asp 112-07-2 112-15-2 64742-95-6
itwtranstech_com---thinner_b.asp 123-86-4 1330-20-7 108-94-1 108-65-6 100-41-4
itwtranstech_com---thinner_bga.asp 112-07-2
itwtranstech_com---thinner_bga_00.asp 112-07-2 110-91-8
itwtranstech_com---thinner_bga_12-00.asp 112-07-2
itwtranstech_com---thinner_b_00-spanish-plg.asp 123-86-4 1330-20-7 108-94-1 108-65-6 70657-70-4
itwtranstech_com---thinner_b_00.asp 123-86-4 1330-20-7 108-94-1 108-65-6 70657-70-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC