MATERIAL SAFETY DATA SHEET
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name THINNER AGA
TRANS TECH AMERICA, INC.
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000
2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
2-BUTOXYETHYLACETATE 112-07-2 80 - 100 Moderately toxic by ingestion and
skin contact.
2-(2-ETHOXYETHOXY)-ETHYLACETATE 112-15-2 1 - 10 NA
AROMATIC HYDROCARBONES 64742-95-6 1 - 10 NA
3 HAZARDS IDENTIFICATION
Potential Health Effects, Skin
Prolonged skin contact may lead to extraction of natural oils, with resultant dry skin, cracking, irritation and dermatitis.
Potential Health Effects, Eye
Eye contact causes irritation, redness, tearing, blurred vision. Eye contact with liquid or vapor causes severe irritation,
redness, tearing, blurred vision. Vapors may cause severe eye irritation, redness, tearing and blurred vision.
Potential Health Effects, Inhalation
Excessive vapor concentration in air, especially in confined spaces, may cause asphyxiation. Excessive inhalation of
vapors can cause nasal, throat and respiratory irritation, dizziness, weakness, fatigue, nausea, headache and possible
unconsciousness.
Potential Health Effects, Ingestion
Swallowing may cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Signs & Symptoms of Short-Term (Acute) Exposure
Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Reports have associated
repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage.
Effects of Long-Term (Chronic) Exposure
Health studies have shown that many solvents pose potential human health risks which may vary from person to person, as
a precaution:
Exposure to liquids and vapors should be minimized.
Repeated or prolonged inhalation of vapor may cause liver and kidney damage.
Prolonged or continuous inhalation of vapors may result in delayed lung damage.
Repeated inhalation of vapor in high concentration can change the blood picture.
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
561 THINNER AGA
Material Id Trade Name 1/ 4
4 FIRST AID MEASURES
Skin
Wash away with soap and water and rinse. DO NOT use solvents or thinners.
Eye
Remove contact lenses, keep eyelids open. Flush with plenty of water (10-15 minutes). Call a physician.
Inhalation
Take the casualty into the fresh air and keep warm. Irregular breathing/no breathing: artificial respiration. Call a
physician.
Ingestion
Do not induce vomiting. Call a physician. Keep at rest.
Medical Conditions Aggravated by Exposure
This product is unlikely to harm health, given normal and proper handling and hygienic precautions. Prolonged inhalation of
vapors in high concentrations may lead to headache, giddiness and nausea. In case of contact with the product danger of
resorption through the skin, irritation of skin/mucous membranes.
In all cases of doubt or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious
person. Unconsciousness: lateral position - call a physician.
5 FIRE FIGHTING MEASURES
Extinguishing Media
Suitable: alcohol resistant foam, CO2, powders, water spray.
Not suitable: water jet
Basic Fire Fighting Procedures
Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard. Appropriate
breathing apparatus may be required.
Unusual Fire & Explosion Hazards
Cool endangered containers with water in case of fire. Do not allow the quenching water into the sewage system.
56 潞C approx.
Flash Point
0.9
Flammability Limits in Air, Lower, % by Volume
8
Flammability Limits in Air, Upper, % by Volume
6 ACCIDENTAL RELEASE MEASURES
Emergency Action
Remove sources of ignition. Provide for sufficient ventilation.
Environmental Precautions
Do not empty into drains. If the product contaminates lakes, rivers or sewer systems, inform appropriate authorities in
accordance with local regulations.
Spill or Leak Procedure
Contain and collect spillage with non-combustible absorbent materials, e.g. sand, earth, vermiculite, diatomaceous earth
and place in container for disposal according to local regulations. Clean preferably with a detergent. Avoid use of solvents.
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
561 THINNER AGA
Material Id Trade Name 2/ 4
7 HANDLING & STORAGE
Handling
Prevent the creation of flammable or explosive concentrations of vapor in air. Avoid vapor concentration higher than the
occupational exposure limit. The product should only be used in areas from which all naked lights and other sources of
ignition have been excluded. Comply with the health and safety at work laws. Keep away from oxidizing agents, from
strongly alkaline and strongly acid materials. Vapors are heavier than air and may spread along floors. Vapors may form
explosive mixtures with air. Preparation may charge electrostatically; always use earthing leads when transferring from
one container to another. Operators should wear anti static footwear and clothing. No sparking tools should be used.
Storage
Containers which are opened must be carefully resealed and kept upright to prevent leakage. Keep container tightly closed.
Never use pressure to empty: container is not a pressure vessel. No smoking. Prevent unauthorized access. Keep away
from oxidizing agents, from strongly alkaline and strongly acid materials. Always keep in containers of same material as the
original one. Avoid heating and direct sunlight.
See also instructions on the label.
Ventilation
Provide adequate ventilation. Where reasonably practicable this should be achieved by the use of local exhaust ventilation
and good general extraction. If these are not sufficient in maintaining concentrations of particles and solvent vapor below
the OEL, suitable respiratory protection must be worn.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye Protection: Personal Protection Equipments (PPE)
Wear safety glasses.
Skin Protection: Personal Protection Equipments (PPE)
Protective gloves. After washing hands, replace lost skin fat by fat containing skin creams. Personnel should wear anti
static clothing made of natural fiber or of high-temperature-resistant synthetic fiber. All parts of the body should be washed
after contact.
Respiratory Protection: Personal Protection Equipments (PPE)
If workplace limits are exceeded, a gas mask approved for this particular job must be worn.
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Fluid, colorless: Odor of organic solvents.
164 - 217
Boiling Point
0.96 g/cm3
Specific Gravity
n.av
Melting Point
100
Percent Volatile
3 approx. (mm Hg.) hPa
Vapor Pressure
n.av
Evaporation Rate
>1
Vapor Density
no
Solubility In Water
10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable under recommended storage and handling conditions. (see section 7)
Materials to Avoid: Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid
exothermic reactions.
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
561 THINNER AGA
Material Id Trade Name 3/ 4
Hazardous Reactions/Decomposition Products
When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and
dioxide, smoke, oxides of nitrogen.
11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Skin, eyes, ingestion, inhalation
12 ECOLOGICAL INFORMATION
EcoToxicological Information
If the product contaminates lakes, rivers or sewer systems, inform appropriate authorities in accordance with local
regulations.
13 DISPOSAL CONSIDERATIONS
Waste Disposal
Dispose of in accordance with all federal, state, and local regulations.
14 TRANSPORT INFORMATION
Department of Transportation (DOT) Requirements:
General Transportation Information for Bulk Shipments
Proper Shipping Name Paint Related Material
UN/NA Code 1263
15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 2 Flammability 2 Reactivity 1 Personal Prot. Equip. C
16 OTHER INFORMATION
Disclaimer
The details in this material safety data sheet satisfy national legislation. However, we have no knowledge or control over
the individual user's working conditions. The product may not be used for any purpose other than that specified in the
product data sheet unless written consent has been obtained. The user is responsible for the observance of all required
statutory provisions.
3/27/2003 Replaces Sheet Dated
Completed On
TRANS TECH AMERICA, INC.
Completed By
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
561 THINNER AGA
Material Id Trade Name 4/ 4
|