MATERIAL SAFETY DATA SHEET
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name RETARDER SV 1
ITW TRANS TECH
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000
2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
BUTYL GLYCOLATE 7397-62-8 95 - 100
3 HAZARDS IDENTIFICATION
Potential Health Effects, Skin
Possible effects in case of overexposure: skin resorption
Potential Health Effects, Eye
Risk of serious damage to eyes. Irritating to eyes and mucous membranes.
Signs & Symptoms of Short-Term (Acute) Exposure
Irritant. May effect the liver, kidneys and central nervous system. No health damages are to be expected if product is used
appropriately, properly and according to its designation.
Effects of Long-Term (Chronic) Exposure
No health damages are to be expected if product is used appropriately, properly and according to its designation.
4 FIRST AID MEASURES
Skin
Wash immediately with soap and water.
Eye
Rinse immediately with plenty of water. Take to a physician for medical treatment.
Inhalation
Remove to fresh air; if breathing is difficult, get medical attention.
Ingestion
Seek medical advice immediately. Do not induce vomiting.
5 FIRE FIGHTING MEASURES
Printed On 5-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
521 RETARDER SV 1
Material Id Trade Name 1/ 4
Extinguishing Media
Carbon dioxide, foam, dry chemical.
Basic Fire Fighting Procedures
Fire fighters should wear full protective clothing including a self-contained breathing apparatus. Water spray may be
ineffective. If water is used, fog nozzles are preferable. Water may be used to cool tightly closed containers to prevent
pressure build-up due to extreme heat.
Unusual Fire & Explosion Hazards
Keep container tightly closed. Avoid heat, open flames, static electricity, electrical equipment and sparks. Closed container
may explode when exposed to extreme heat. Application to hot surfaces requires special precautions.
73 潞C Method used: closed cup
Flash Point
405 潞C
AutoIgnition Temperature
1.3
Flammability Limits in Air, Lower, % by Volume
6 ACCIDENTAL RELEASE MEASURES
Environmental Precautions
Dispose of or incinerate in accordance with local, state and federal regulations.
Spill or Leak Procedure
Remove all sources of ignition. Ventilate area. Remove by using suitable inert liquid absorbing material, e.g. kieselgur.
7 HANDLING & STORAGE
Handling
FOR INDUSTRIAL USE ONLY! Use only in well ventilated areas. Keep away from all sources of ignition. Keep container
tightly closed. When using do not eat, drink or smoke. Avoid contact with skin and eyes.
Storage
Store in cool, ventilated area. Keep container in a cool place away from heat or flame. Keep containers closed when not in
use.
Ventilation
Local exhaust - yes
Mechanical Exhaust: Yes
Use only with ventilation sufficient to prevent exceeding recommended exposure limit or buildup of explosive concentrations
of vapor in air. No smoking, or use of flame or other ignition sources.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye Protection: Personal Protection Equipments (PPE)
Wear chemical safety goggles to prevent eye contact.
Skin Protection: Personal Protection Equipments (PPE)
Use appropriate protective gloves when handling. Prevent skin contact. Wear a protective apron if splashing or repeated
contact is likely.
Respiratory Protection: Personal Protection Equipments (PPE)
In high vapor concentrations use approved respirators for organic vapors or approved self contained breathing apparatus.
Its use must be in compliance with all OSHA health and fit testing requirements. Use respiratory protection when spray
painting.
General
Remove and wash contaminated clothing before reuse. Wash hands thoroughly before eating, drinking, smoking, or using
toilet facilities. Use re-greasing skin cream.
Printed On 5-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
521 RETARDER SV 1
Material Id Trade Name 2/ 4
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Clear liquid. Poor, ester-like odor.
186 潞C
Boiling Point
1.02
Specific Gravity
N/A
Melting Point
100 %
Percent Volatile
1
Vapor Pressure
>1
Vapor Density
moderate
Solubility In Water
10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable under normal conditions of use. Avoid high temperatures,
Hazardous Reactions/Decomposition Products
None, provided the product is adequately stored and handled.
Materials to Avoid: Strong acids, alkalies or oxidizers, In case of fire, mainly carbon dioxide, carbon monoxide and soot
may be formed.
Hazardous Polymerization
Will not occur
11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Inhalation, ingestion, skin and eye contact.
Carcinogenicity
NATIONAL TOXICOLOGY PROGRAM: No
I.A.R.C. MONOGRAPHS: No
OSHA: No
12 ECOLOGICAL INFORMATION
13 DISPOSAL CONSIDERATIONS
Waste Disposal
Dispose in accordance with all applicable Federal, State, Provincial, and local environmental regulations. Empty containers
should be recycled or disposed of through an approved waste management facility.
14 TRANSPORT INFORMATION
Proper Shipping Name Paint Related Material
Hazard Class 3 UN/NA Code 1263
Packaging Group III
15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 2 Flammability 2 Reactivity 0 Personal Prot. Equip. C
Printed On 5-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
521 RETARDER SV 1
Material Id Trade Name 3/ 4
16 OTHER INFORMATION
Disclaimer
The information contained herein is based on technical data believed to be reliable. However, since the conditions under
which this information may be applied are beyond our control, we can assume no liability for results of its application. This
information should be used only by a person having sufficient technical skill to make informed judgements regarding its
application.
6/5/2008 9/26/2007
Replaces Sheet Dated
Completed On
Completed By
Printed On 5-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
521 RETARDER SV 1
Material Id Trade Name 4/ 4
|