NuGenTec
AutoDishWash Powder Page 1 of 6
PRD Number: OAB101 May 29, 2007
MATERIAL SAFETY DATA SHEET
1. PRODUCT IDENTIFICATION AND USE
Product Identification
----------------------
Product Name: AutoDishWash Powder
Product Number: OAB101
CAS Number: Blend
Company Identification
----------------------
NuGeneration Technologies, LLC
100 Professional Center Drive suite 101
Rohnert Park, CA 94928 USA www.nugentec.com
(707) 820-4080 (For product information)
1-202-483-7616 (For emergencies)
1-800-424-9300 or 1-202-483-7616 (CHEMTREC: For emergencies)
SPECIAL NOTES:
alkaline cleaning compound - Multi-metal safe.
2. HAZARDOUS INGREDIENTS
COMPONENT LISTING:
Chemical Name Amount CAS Number
------------- -------- ----------
SODIUM SILICATE < 50.0 % 13472-30-5
TETRASODIUM PYROPHOSPHATE < 50.0 % 7722-88-5
EXPOSURE GUIDELINES:
No Information Available.
Canadian Disclosure List
TETRASODIUM PYROPHOSPHATE (7722-88-5)
3. PHYSICAL DATA
FORM ...............................: Powder
COLOR ..............................: Light tan
ODOR ...............................: No odor
BOILING POINT ......................: N/A F
SOLUBILITY IN WATER ................: Complete
SPECIFIC GRAVITY ...................: 1.24 (Water = 1)
BULK DENSITY .......................: 10.34
MELTING/FREEZING POINT .............: N/A F
PH .................................: N/A
% VOLATILES ........................: 0%
VOLATILE ORGANIC COMPOUNDS (VOC) ...: None
PH (5% B.V.) .......................: 11
MISCELLANEOUS:
This product was specially formulated as a steel and cast iron, parts
cabinet cleaner and should be run at temperatures from 130 F to 200 F.
NuGenTec
AutoDishWash Powder Page 2 of 6
PRD Number: OAB101 May 29, 2007
INHALATION:
No hazards expected in normal industrial use at room temperature. Vapors
and/or aerosols which may be formed at elevated temperatures may be
irritating to eyes and respiratory tract. Dust is very irritating to eyes
and respiratory tract.
INGESTION:
Irritating to mouth, throat, and stomach.
SIGNS AND SYMPTOMS OF EXPOSURE:
Exposure may lead to rash or burn.
CHRONIC EFFECTS:
Prolonged and/or repeated contact may produce mild to moderate skin
irritation or inflammation and in some cases rashes or burns.
REPRODUCTIVE HAZARDS:
No reproductive hazards.
CARCINOGENICITY INFORMATION:
No known cancer hazards.
MISCELLANEOUS:
Solutions extremely slippery when spilled.
4. FIRE AND EXPLOSION DATA
FLAMMABLE PROPERTIES
COC Flash Point: None
TCC Flash Point: None
Autoignition Temperature: None
FLAMMABLE LIMITS IN AIR
LEL: None
UEL: None
EXTINGUISHING MEDIA:
Will not burn.
FIRE & EXPLOSION HAZARDS:
Material will not burn.
FIRE FIGHTING INSTRUCTIONS:
Contaminated extinguishing water must be disposed of in accordance with
applicable regulations.
COMBUSTION PRODUCTS:
Carbon Monoxide, carbon dioxide, and other oxides may be generated as
products of combustion.
5. REACTIVITY DATA
STABILITY:
Stable.
NuGenTec
AutoDishWash Powder Page 3 of 6
PRD Number: OAB101 May 29, 2007
POLYMERIZATION:
Hazardous polymerization will not occur.
INCOMPATIBILITY WITH OTHER MATERIALS:
May corrode copper, aluminum, zinc, and their alloys. Will react with
acidic materials (use to neutralize).
DECOMPOSITION:
Decomposition will not occur if handled and stored properly. Product may
decompose at temperatures above 270掳C and release carbon, nitrogen or
oxides.
CONDITIONS TO AVOID:
This material is safe under normal storage and handling conditions. Avoid
contact with this material and copper, aluminum, zinc, and their alloys.
COMBUSTION PRODUCTS:
Carbon Monoxide, carbon dioxide, and other oxides may be generated as
products of combustion.
6. TOXICOLOGICAL PROPERTIES
EYE:
Contact may cause eye irritation and or burns.
SKIN:
Contact may cause skin irritation.
INHALATION:
No hazards expected in normal industrial use at room temperature. Vapors
and/or aerosols which may be formed at elevated temperatures may be
irritating to eyes and respiratory tract. Dust is very irritating to eyes
and respiratory tract.
INGESTION:
Irritating to mouth, throat, and stomach.
SIGNS AND SYMPTOMS OF EXPOSURE:
Exposure may lead to rash or burn.
CHRONIC EFFECTS:
Prolonged and/or repeated contact may produce mild to moderate skin
irritation or inflammation and in some cases rashes or burns.
REPRODUCTIVE HAZARDS:
No reproductive hazards.
CARCINOGENICITY INFORMATION:
No known cancer hazards.
MISCELLANEOUS:
Solutions extremely slippery when spilled.
EYE EFFECTS:
Can cause severe eye irritation including burns and or permanent damage.
NuGenTec
AutoDishWash Powder Page 4 of 6
PRD Number: OAB101 May 29, 2007
SKIN EFFECTS:
Contact may cause skin irritation, rash or burns.
ACUTE ORAL EFFECTS:
No know hazards in normal industrial use.
ACUTE INHALATION EFFECTS:
No know hazards in normal industrial use. At elevated temperatures, >110
F, irritation may develop without adequate ventilation. May be irritating
if inhaled.
REPRODUCTION AND BIRTH EFFECTS:
There are no known or reported effects on reproductive function or fetal
development.
7. PREVENTITIVE MEASURES
RECOMMENDED STORAGE TEMPERATURE
Minimum: 4.4 C (39.9 F)
Maximum: 48.9 C (120.0 F)
SHELF LIFE: (in original, sealed containers)
5 years @ 4.4 C
2 years @ 48.9 C
HANDLING (PERSONNEL):
Avoid contact with eyes, skin, and clothing. Empty drums should be
completely drained (triple rinsed), properly bunged, and promptly returned
to a drum reconditioner, or properly disposed of. Wash hands thoroughly
after handling. Wash contaminated clothing before reuse.
HANDLING (PHYSICAL ASPECTS):
Keep container closed to avoid contamination.
STORAGE PRECAUTIONS:
Store in a cool dry place. Do not stack drums more than three pallets
high. Store in a tightly closed container.
MISCELLANEOUS:
Do not stack over Two pallets high.
ENGINEERING CONTROLS:
Good general ventilation should be sufficient to control airborne levels.
Facilities storing or utilizing this material should be equipped with an
eyewash facility and a safety shower.
EYE / FACE PROTECTION REQUIREMENTS:
When splashing of the material may occur, chemical goggles and a face
shield are recommended.
SKIN PROTECTION REQUIREMENTS:
Wear protective gloves to minimize skin contact. Nitrile rubber and PVC
are suitable protective materials; Neoprene is recommended. Wash hands
thoroughly after handling.
NuGenTec
AutoDishWash Powder Page 5 of 6
PRD Number: OAB101 May 29, 2007
RESPIRATORY PROTECTION REQUIREMENTS:
Under normal use conditions, with adequate ventilation, no special
handling equipment is required. At elevated temperatures, > 110 F,
ventilation is required.
MISCELLANEOUS:
Where an apron and protective clothing.
SAFEGUARDS (PERSONNEL):
Protect skin and eyes from exposure. Wear appropriate personal protective
equipment.
INITIAL CONTAINMENT:
Floor may become slippery. Contain spilled material. Wash area to
prevent slipping. Treat or dispose of waste material in accordance with
all local, state/provincial, and national requirements.
LARGE SPILLS PROCEDURE:
Forms smooth, slippery surfaces on floors, posing an accident risk. Clean
up spills immediately, observing precautions in Protective Equipment
section. Neutralize spill with a weak acid such as vinegar or acetic
acid. Flush spill area with water to wastewater treatment system. After
removal, flush contaminated area thoroughly with water. Or, absorb spill
with inert material (e g, dry sand or earth), then place in a chemical
waste container dispose of in an approved sanitary landfill. Treat or
dispose of waste material in accordance with all local, state/provincial,
and national requirements.
SMALL SPILLS PROCEDURE:
Floor may become slippery. Wash with water or absorb spills with inert
material. Treat or dispose of waste material in accordance with all
local, state/provincial, and national requirements.
WASTE DISPOSAL:
Uncleaned empty containers should be disposed of in the same manner as the
contents. Dilute or neutralize with acid and discharge to an industrial
sewage treatment facility. Or bury in an approved sanitary landfill.
Treat or dispose of waste material in accordance with all local,
state/provincial, and national requirements. For additional waste
disposal information contact your local NuGenTec representative at (888)
99-NuGen.
CONTAMINATED MATERIALS:
Wash contaminated clothing before reuse.
CONTAINER DISPOSAL:
Containers should be triple rinsed prior to disposal.
8. FIRST AID MEASURES
EYE CONTACT FIRST AID:
Hold eyelids apart and flush eyes with plenty of water for at least 15
minutes. Get medical attention if irritation develops or persists.
SKIN CONTACT FIRST AID:
Immediately wash skin with plenty of soap and water while removing
NuGenTec
AutoDishWash Powder Page 6 of 6
PRD Number: OAB101 May 29, 2007
contaminated clothing and shoes. Get medical attention if irritation
develops or persists.
INHALATION FIRST AID:
Although this product is not known to cause respiratory problems, if
breathing is difficult, remove to fresh air and provide oxygen. Get
medical attention if cough or other symptoms develop.
Remove from area of exposure. Seek immediate medical attention if
respiratory irritation or distress continues.
INGESTION FIRST AID:
Give milk or water. Do not induce vomiting. Get medical attention
immediately.
STATEMENT OF PRACTICAL TREATMENT:
Always have plenty of water available for first aid.
NOTES TO PHYSICIAN:
Treat patient symptomatically.
9. PREPARATION DATE OF MSDS
PREPARED BY .......: Donato Polignone
APPROVAL DATE .....: May 29, 2007
SUPERCEDES DATE ...: February 12, 2003
PRD NUMBER ........: OAB101 (Official Copy)
ADDITIONAL INFORMATION:
The data in this Material Safety Data Sheet relates only to the specific
material designated herein. It does not relate to use in combination with
any other material or in any process.
**********************************************************************
This information is furnished without warranty, expressed or implied,
except that it is accurate to the best knowledge of NuGeneration
Technologies, LLC. The data on this sheet are related only to the
specific material designated herein. NuGeneration Technologies, LLC
assumes no legal responsibility for use or reliance upon these data.
**********************************************************************
END OF MSDS
**********************************************************************
|