NuGenTec BUG-KILL Page 1 of 4
MATERIAL SAFETY DATA SHEET
PRD Number: 712MM June 1, 2005
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name: BUG-KILL Synonyms: BUG-K, ONYXIDE 200庐
Manufacturer NuGeneration Technologies, LLC
100 Professional Center Dr., Suite 101, Rohnert Park, CA USA
Telephone Numbers 鈥? 24-Hour Emergency Assistance:
Medical: 800-228-5635 Chemtrec: 800-424-9300 Chemtrec Int'l: 703-527-3887
Telephone Numbers - General Assistance (707) 820-4080 (product info)
Product Class Triazine
2 COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient Name CAS Number Weight Range
1,3,5-Triazine-1,3,5(2H,4H,6H)-triethanol 4719-04-4 78.5 %
Water 7732-18-5 21.5 %
3 HAZARDS IDENTIFICATION
Emergency Overview
Clear liquid, amber color.
Warning!
May cause severe irritation to eyes and skin.
Health Effects: Eyes
Contact can cause moderate to severe irritation and possible injury to the eyes.
Health Effects: Skin
Repeated or prolonged contact may cause severe irritation. Prolonged contact with this product
may cause allergic skin sensitization reactions.
Health Effects: Inhalation
Inhalation of vapors or mists of the product may be irritating to the respiratory system.
Health Effects: Ingestion
This product may be harmful if it is swallowed.
HAZARD RATINGS HMIS NFPA
Health 2 2
Flammability 1 1
Reactivity 0 0
PPE X
4 FIRST AID MEASURES
Eyes
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical
attention at once.
Skin
For skin contact flush with large amounts of water. If irritation persists, get medical attention. Immediately
take off all contaminated clothing. Wash contaminated clothing before reuse.
Inhalation
If symptoms are experienced, remove source of contamination or move victim to fresh air. If symptoms
persist, get medical attention. If the affected person is not breathing, apply artificial respiration. If
breathing is difficult, give oxygen. Seek medical attention.
NuGenTec BUG-KILL Page 2 of 4
MATERIAL SAFETY DATA SHEET
PRD Number: 712MM June 1, 2005
Ingestion
If the material is swallowed, get immediate medical attention or advice. Do not induce vomiting.
Notes to Physician
If the product is ingested, probable mucosal damage may contraindicate the use of gastric lavage. Treat
the affected person appropriately.
5 FIRE FIGHTING MEASURES
Flash Point (> 93.9 掳C), > 201 F
Extinguishing Media
Dry chemical, foam, carbon dioxide, water fog.
Fire Fighting Equipment / Instructions
Firefighters should wear full fire-fighting turn-out gear (full Bunker gear) including NIOSH-approved self-
contained breathing apparatus with full facepiece operated in the pressure demand or other positive
pressure mode.
6 ACCIDENTAL RELEASE MEASURES
SPILL AND LEAK PROCEDURES
Emergency Action:
Isolate spill or leak area immediately. Keep unauthorized personnel away. Stay upwind. Keep out of low
areas. Ventilate closed spaces before entering.
Do not touch or walk through spilled material. Wear appropriate personal protective equipment during
cleanup. Small Spills: Absorb with earth, sand or other non-combustible material and transfer to
containers for later disposal. Large Spills: Dike ahead of liquid spill for later disposal. Do not discharge
effluent containing this product into lakes, streams, ponds, estuaries, oceans or other waters unless in
accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit
and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent
containing this product to sewer systems without previously notifying the local sewage treatment plant
authority. For guidance, contact your State Water Board or Regional Office of the EPA.
Surfaces may become slippery after spillage.
7 HANDLING & STORAGE
Handling Procedures
Avoid contact with skin and eyes. Wash thoroughly after handling. As with all chemicals, good industrial
hygiene practices should be followed when handling this material.
Storage Procedures
Avoid freezing or excessive heat. Keep this material in a cool, well-ventilated place. DO NOT
CONTAMINATE WATER, FOOD OR FEED BY STORAGE OR DISPOSAL.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Controls
Use general ventilation. Local exhaust is suggested for use, where possible, in enclosed or
confined spaces.
Personal Protective Equipment: Eyes/Face
Wear chemical goggles; face shield (if splashing is possible).
Personal Protective Equipment: Skin
Work clothing sufficient to prevent all skin contact should be worn, such as coveralls and long
sleeves. Use impervious gloves.
Personal Protective Equipment: Respiratory
NuGenTec BUG-KILL Page 3 of 4
MATERIAL SAFETY DATA SHEET
PRD Number: 712MM June 1, 2005
If vapors are present or irritation is experienced, NIOSH approved respiratory protection for organic
Vapors should be worn.
Personal Protective Equipment: General
Eye wash fountain and emergency showers are recommended.
9 PHYSICAL & CHEMICAL PROPERTIES
Flash Point (> 93.9 掳C), > 201 F
Boiling Point (100 掳C), 212 F
Specific Gravity (9.568 lb/gal), 1.15 g/ml
Percent Volatile 21.5 % (w/w)
Vapor Density Estimated lighter than air.
Evaporation Rate Estimated slower than ethyl ether.
Solubility in Water Miscible.
RVOC 0 %
pH Value 10.5 as is
Appearance and Odor
Clear liquid, amber color.
10 STABILITY & REACTIVITY
Chemical Stability
Stable under normal conditions.
Conditions to Avoid
Avoid strong oxidizing agents.
Incompatibility
This product may react with strong acids or oxidizing agents.
Hazardous Decomposition
At thermal decomposition temperatures carbon monoxide, carbon dioxide, and oxides of nitrogen.
Hazardous Polymerization
Will not occur.
11 TOXICOLOGICAL INFORMATION
LD50 Value Dermal LD50 (rabbit) = >2,000 < or equal to 20,000 mg/kg
_1,3,5-Triazine-1,3,5(2H,4H,6H)- 4719-04-4
NIOSH - Selected LD50s and LC50s Oral LD50 Rat : 763 mg/kg
12 ECOLOGICAL INFORMATION
Ecotoxicity: No data available on finished product.
13 DISPOSAL CONSIDERATIONS
Disposal Instructions
CONTAINER DISPOSAL - Do not reuse empty container. Triple rinse empty container with water.
Return metal drum then offer for reconditioning or puncture and dispose of in a sanitary landfill, or by
other procedures approved by State and local authorities. Plastic containers may be disposed of in a
sanitary landfill, incinerated, or if allowed by local authorities, by burning. If burned, stay out of smoke.
PESTICIDE DISPOSAL - Pesticide wastes are acutely hazardous. Improper disposal of excess
pesticide, spray mixture, or rinsate is a violation of Federal Law. If these wastes cannot be disposed of
NuGenTec BUG-KILL Page 4 of 4
MATERIAL SAFETY DATA SHEET
PRD Number: 712MM June 1, 2005
by use according to label instructions contact your State Pesticide or Environmental Control Agency, or
the Hazardous Waste representative at the nearest EPA Regional Office for guidance.
14 TRANSPORT INFORMATION
DOT Proper Shipping Name Refer to bill of lading or container label for DOT or other transportation
hazard classification, if any.
15 REGULATORY INFORMATION
Ingredient Name CAS Number Weight Range
1,3,5-Triazine-1,3,5(2H,4H,6H)-triethanol 4719-04-4 78.5
Water 7732-18-5 21.5
Inventories
All components of this product are listed on the following inventories: U.S.A. (TSCA), Canada(DSL),
Europe(EINECS/ELINCS/Polymer/NLP), Japan(ENCS), Australia(AICS), Korea(ECL),
Philippines(PICCS)Swiss (SWISS),
There is no calculable reportable quantity (RQ) for this product.
Disclaimer
Disclaimer: Nothing contained herein grants or extends a license, express or implied, in connection with
patents, issued or pending, of the manufacturer or others. The information contained herein is based on
the manufacturer's own study and the works of others. The manufacturer makes no warranties,
expressed or implied, as to the accuracy, completeness, or adequacy of the information contained
herein. The manufacturer shall not be held liable (regardless of fault) to the vendee's employees, or
anyone for any direct, special or consequential damages arising out of or in connection with the
accuracy, completeness, adequacy or furnishing of such information.
16 OTHER INFORMATION
PREPARED BY .............: Donato Polignone
APPROVAL DATE .........: July 1, 2005
SUPERCEDES DATE ....: July 19, 1998
PRD NUMBER ...............: 712MM (Official Copy)
ADDITIONAL INFORMATION:
The data in this Material Safety Data Sheet relates only to the specific
material designated herein. It does not relate to use in combination
with any other material or in any process.
**********************************************************************
This information is furnished without warranty, expressed or implied,
except that it is accurate to the best knowledge of NuGeneration
Technologies, LLC. The data on this sheet are related only to the
specific material designated herein. NuGeneration Technologies, LLC
assumes no legal responsibility for use or reliance upon these data.
**********************************************************************
END OF MSDS
|