NuGenTec MSDS
NuBuff 2 Page 1 of 3
MATERIAL SAFETY DATA SHEET
PRD #: DPC002 May 25, 2007
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: NuBuff 2 Product Number: DPC002 CAS Number: Blend
NuGeneration Technologies, LLC: 100 Professional Center Drive, Suite 101, Rohnert Park, CA 94928 USA
(707) 820-4080 (product information), 800-424-9300 or 202-483-7616 (CHEMTREC: For emergencies)
2. COMPOSITION/INFORMATION ON INGREDIENTS
100.0% NuBuff 2 CONTAINING: HAZARDOUS AND/OR REGULATED COMPONENTS
Chemical Name Amount CAS Number
None
NON-HAZARDOUS COMPONENTS
Chemical Name Amount CAS Number
NONIONIC SURFACTANT BLEND < 25.0 % 9016-45-9
POTASSIUM PHOSPHONATE < 10.0 % 7953-76-8
Balance non-hazardous ingredients- DI water Balance 7732-18-5
HAZARDS DISCLOSURE: This product does not contain hazardous materials as defined by the OSHA
Hazard Communication Standard 29 CFR 1910.1200. As defined under Sara 311 and 312, this product
contains no known hazardous materials.
SPECIAL NOTES: This product contains NO ammonia or amines.
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: CAUTION
Alkaline Material - Avoid eye and skin contact. May cause skin and eye irritation or burns.
HMIS/NFPA Rating: Health - 2, Flammability - 0, Reactivity - 0 Personal Protection Index - C
NFPA/HMIS Definitions: (0-Least, 1-Slight, 2-Moderate, 3-High, 4-Extreme).
POTENTIAL HEALTH EFFECTS
EYE: Causes eye irritation and or burns. SKIN: Contact May cause skin irritation or burns.
INHALATION: No hazards expected in normal industrial use at room temperature. Vapors and/or aerosols
which may be formed at elevated temperatures may be irritating to eyes and respiratory tract.
INGESTION: May be harmful if swallowed. Irritating to mouth, throat, or stomach and may cause tissue burns.
SIGNS AND SYMPTOMS OF EXPOSURE: If exposed areas are flushed promptly and thoroughly with water,
there should be little or no harm. Long-term exposure may lead to rash or burn.
CARCINOGENICITY INFORMATION: No known cancer hazards.
MISCELLANEOUS: Solutions extremely slippery when spilled.
4. FIRST AID MEASURES
EYE CONTACT FIRST AID: Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes.
Get medical attention if irritation develops or persists.
SKIN CONTACT FIRST AID: Immediately wash skin with plenty of soap and water while removing
contaminated clothing and shoes. Get medical attention if irritation develops or persists.
INHALATION FIRST AID: Although this product is not known to cause respiratory problems, if
breathing is difficult, remove to fresh air and provide oxygen. Get medical attention if cough or other
symptoms develop. Remove from area of exposure. Seek immediate medical attention if respiratory irritation
or distress continues.
INGESTION FIRST AID: Give milk or water. Do not induce vomiting. Get medical attention immediately.
STATEMENT OF PRACTICAL TREATMENT: Always have plenty of water available for first aid.
NOTES TO PHYSICIAN: Treat patient symptomatically.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES: Autoignition Temp: None
COC Flash Point: None TCC Flash Point: None
NuGeneration Technologies, LLC www.nugentec.com
NuGenTec MSDS
NuBuff 2 Page 2 of 3
MATERIAL SAFETY DATA SHEET
PRD #: DPC002 May 25, 2007
FLAMMABLE LIMITS IN AIR: LEL: None; UEL: None EXTINGUISHING MEDIA: Will not burn.
FIRE & EXPLOSION HAZARDS: Incinerating may create toxic decomposition products.
FIRE FIGHTING INSTRUCTIONS: Contaminated extinguishing water must be disposed of in accordance
with applicable regulations.
6. ACCIDENTAL RELEASE MEASURES
SAFEGUARDS (PERSONNEL):
Protect skin and eyes from exposure. Wear appropriate personal protective equipment.
INITIAL CONTAINMENT:
Floor may become slippery. Contain spilled material. Wash area to prevent slipping. Treat or dispose of
waste material in accordance with all local, state/provincial, and national requirements.
SPILLS PROCEDURE:
Forms smooth, slippery surfaces on floors, posing an accident risk. Clean up spills immediately, observing
precautions in Protective Equipment section. Neutralize spill with a weak acid such as vinegar or acetic acid.
Flush spill area with water to wastewater treatment system. After removal, flush contaminated area
thoroughly with water. Or, absorb spill with inert material (e g, dry sand or earth), then place in a chemical
waste container dispose of in an approved sanitary landfill. Treat or dispose of waste material in accordance
with all local, state/provincial, and national requirements.
7. HANDLING AND STORAGE
RECOMMENDED STORAGE TEMPERATURE Minimum: 4.4C (40F) Maximum: 48.9C (120F)
SHELF LIFE(in original sealed containers): 5 years @ 4.4 C 3 years @ 48.9 C
HANDLING (PERSONNEL): Avoid contact with eyes, skin, and clothing.
STORAGE PRECAUTIONS: Keep from freezing. Keep container closed when not in use.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS:
Good general ventilation should be sufficient to control airborne levels. Facilities storing or utilizing this
material should be equipped with an eyewash facility and a safety shower.
EYE / FACE PROTECTION REQUIREMENTS:
When splashing of the material may occur, chemical goggles and a face shield are recommended.
SKIN PROTECTION REQUIREMENTS:
Wear protective gloves to minimize skin contact. Nitrile rubber and PVC are suitable protective materials;
Neoprene is recommended. Wash hands thoroughly after handling.
RESPIRATORY PROTECTION REQUIREMENTS:
Under normal use conditions, with adequate ventilation, no special handling equipment is required.
MISCELLANEOUS: Where an apron and protective clothing.
EXPOSURE GUIDELINES: none established.
9. PHYSICAL AND CHEMICAL PROPERTIES
FORM: Liquid COLOR: colorless
ODOR: Mild BOILING POINT: >212 F
SOLUBILITY IN WATER: Complete SPECIFIC GRAVITY: 1.075 (Water = 1)
BULK DENSITY: 8.97 MELTING/FREEZING POINT: <32 F
PH: 12.5 PH @ 5%: 12.1 % VOLATILES = 0%
10. STABILITY AND REACTIVITY
STABILITY: Stable.
POLYMERIZATION: Hazardous polymerization will not occur.
INCOMPATIBILITY WITH OTHER MATERIALS: May react with acidic materials. May corrode copper,
aluminum, zinc, and their alloys.
DECOMPOSITION: Decomposition will not occur if handled and stored properly. Product may decompose at
temperatures above 270掳C and release carbon, nitrogen or oxides.
CONDITIONS TO AVOID: This material is safe under normal storage and handling conditions. Avoid contact
with this material and copper, aluminum, zinc, and their alloys.
NuGeneration Technologies, LLC www.nugentec.com
NuGenTec MSDS
NuBuff 2 Page 3 of 3
MATERIAL SAFETY DATA SHEET
PRD #: DPC002 May 25, 2007
11. TOXICOLOGICAL INFORMATION
EYE EFFECTS: Can cause severe eye irritation.
SKIN EFFECTS: Contact may cause skin irritation.
ACUTE ORAL EFFECTS: No know hazards in normal industrial use.
ACUTE INHALATION EFFECTS: No know hazards in normal industrial use.
12. ECOLOGICAL INFORMATION - No information available.
13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL: Uncleaned empty containers should be disposed of in the same manner as the
contents. Dilute or neutralize with acid and discharge to an industrial sewage treatment facility. Or bury in an
approved sanitary landfill. Treat or dispose of waste material in accordance with all local, state/provincial, and
national requirements.
CONTAMINATED MATERIALS: Wash contaminated clothing before reuse.
CONTAINER DISPOSAL: Containers should be triple rinsed prior to disposal.
14. TRANSPORTATION INFORMATION
PRODUCT LABEL.......................: NuBuff 2 D.O.T. SHIPPING NAME......: Cleaning Compound
TECHNICAL SHIPPING NAME...: Cleaning Compound, n.o.s Non-regulated Material.
D.O.T. LABEL..............................: NOBIN Non-Hazardous
UN NUMBER................................: N/A PRODUCT RQ (lbs)..............: N/A
D.O.T. HAZARD CLASS..............: N/A D.O.T. PLACARD.................: N/A
BULK CLASS................................: N/A PACKAGE CLASS...............: 55
MISCELLANEOUS: Export Classification, organic surface active agents (other than soap), washing
preparations and cleaning preparations, schedule B # 3402.90.5030.
15. REGULATORY INFORMATION
EEC Symbols and Indications of Danger: N/A
R-Phrases: R36/38 - Irritating to eyes and skin. S-Phrases: S24/25 - Avoid contact with skin and eyes.
WHMIS Hazard Symbols: N/A
Canadian Disclosure List - N/A
CERCLA Hazardous Substances N/A
MISCELLANEOUS INFORMATION: This material or all of its components are listed on the Inventory of
Existing Chemical Substances under the Toxic Substance Control Act (TSCA). This material or all of its
components are listed on the Canadian Domestic Substances List (DSL). This material or all of its
components are listed (or considered as having been notified) on the European Inventory of Existing
Chemical Substances (EINECS).
16. OTHER INFORMATION
Prepared By.......: Donato Polignone PRD Number........: DPC002 (Official Copy)
Approval Date.....: May 25, 2007 Supersedes Date...: New
ADDITIONAL INFORMATION: The data in this Material Safety Data Sheet relates only to the specific
material designated herein. It does not relate to use in combination with any other material or in any process.
This information is furnished without warranty, expressed or implied, except that it is accurate to the best
knowledge of NuGeneration Technologies, LLC. The data on this sheet are related only to the specific
material designated herein. NuGeneration Technologies, LLC assumes no legal responsibility for use or
reliance upon these data.
END OF MSDS
NuGeneration Technologies, LLC www.nugentec.com
|