NuGenTec
NuBrite B 30 Page 1 of 6
PRD Number: SCC 101 ___ May 30, 2007
MATERIAL SAFETY DATA SHEET
1. PRODUCT IDENTIFICATION AND USE
Product Identification
----------------------
Product Name: NuBrite B 30
Product Number: SCC101
CAS Number: Blend
Company Identification
----------------------
NuGeneration Technologies, LLC www.nugentec.com
100 Professional Center Drive Suite 101
Rohnert Park, CA 94928 USA
(707) 820-4080 (For product information)
1-800-424-9300 or 1-202-483-7616 (CHEMTREC) (For emergencies)
SPECIAL NOTES:
This product is Biodegradable.
2. HAZARDOUS INGREDIENTS
COMPONENT LISTING:
Chemical Name Amount CAS Number
------------- -------- ----------
Confidential Ingredient A < 5.0 % Trade Secret
NON-IONIC SURFACTANT BLEND < 5.0 % tradesecret
BALANCE NON-HAZARDOUS INGREDIENTS > 90.0 % N/A
EXPOSURE GUIDELINES:
No Information Available.
WHMIS Hazard Symbols:
None
3. PHYSICAL DATA
FORM ...............................: Liquid
COLOR ..............................: Red
ODOR ...............................: Mild
BOILING POINT ......................: >212 F
SOLUBILITY IN WATER ................: Complete
SPECIFIC GRAVITY ...................: 1.06 (Water = 1)
BULK DENSITY .......................: 8.8
MELTING/FREEZING POINT .............: 32 F
PH .................................: 12
NuGenTec
NuBrite B 30 Page 2 of 6
PRD Number: SCC 101 ___ May 30, 2007
VOLATILE ORGANIC COMPOUNDS (VOC) ...: None
PH @ 5% ............................: 11.5
INHALATION:
No known hazards in normal industrial use.
INGESTION:
Ingestion is not considered a potential route of exposure.
SIGNS AND SYMPTOMS OF EXPOSURE:
Long-term exposure may lead to rash or burn. If exposed areas are flushed
promptly and thoroughly with water, there should be little or no harm.
This product is completely soluble in water.
CHRONIC EFFECTS:
Prolonged and/or repeated contact may produce mild to moderate skin
irritation or inflammation and or drying of the skin.
REPRODUCTIVE HAZARDS:
No reproductive hazards.
CARCINOGENICITY INFORMATION:
No known cancer hazards.
MISCELLANEOUS:
Poses little or no immediate hazard. Slippery, can cause falls if walked
on.
4. FIRE AND EXPLOSION DATA
FLAMMABLE PROPERTIES
COC Flash Point: None
TCC Flash Point: None
Autoignition Temperature: None
FLAMMABLE LIMITS IN AIR
LEL: None
UEL: None
EXTINGUISHING MEDIA:
Will not burn.
FIRE & EXPLOSION HAZARDS:
Material will not burn.
5. REACTIVITY DATA
STABILITY:
Stable.
NuGenTec
NuBrite B 30 Page 3 of 6
PRD Number: SCC 101 ___ May 30, 2007
POLYMERIZATION:
Hazardous polymerization will not occur.
INCOMPATIBILITY WITH OTHER MATERIALS:
None known.
DECOMPOSITION:
Decomposition will not occur if handled and stored properly.
CONDITIONS TO AVOID:
This material is safe under normal storage and handling conditions.
6. TOXICOLOGICAL PROPERTIES
EYE:
Contact causes severe eye irritation.
SKIN:
Contact may causes skin irritation.
INHALATION:
No known hazards in normal industrial use.
INGESTION:
Ingestion is not considered a potential route of exposure.
SIGNS AND SYMPTOMS OF EXPOSURE:
Long-term exposure may lead to rash or burn. If exposed areas are flushed
promptly and thoroughly with water, there should be little or no harm.
This product is completely soluble in water.
CHRONIC EFFECTS:
Prolonged and/or repeated contact may produce mild to moderate skin
irritation or inflammation and or drying of the skin.
REPRODUCTIVE HAZARDS:
No reproductive hazards.
CARCINOGENICITY INFORMATION:
No known cancer hazards.
MISCELLANEOUS:
Poses little or no immediate hazard. Slippery, can cause falls if walked
on.
EYE EFFECTS:
Contact may cause eye irritation.
NuGenTec
NuBrite B 30 Page 4 of 6
PRD Number: SCC 101 ___ May 30, 2007
SKIN EFFECTS:
Contact may cause slight skin irritation.
ACUTE ORAL EFFECTS:
No know hazards in normal industrial use.
ACUTE INHALATION EFFECTS:
No know hazards in normal industrial use.
7. PREVENTITIVE MEASURES
RECOMMENDED STORAGE TEMPERATURE
Minimum: 4.4 C (39.9 F)
Maximum: 48.9 C (120.0 F)
HANDLING (PERSONNEL):
Avoid prolonged contact with skin or eyes.
HANDLING (PHYSICAL ASPECTS):
Store in a cool dry area.
STORAGE PRECAUTIONS:
Keep from freezing. Keep container closed when not in use.
MISCELLANEOUS:
Do not stack over three pallets high.
ENGINEERING CONTROLS:
No special ventilation requirements.
EYE / FACE PROTECTION REQUIREMENTS:
Where contact with this material is likely, eye protection is recommended.
SKIN PROTECTION REQUIREMENTS:
Wear protective gloves to minimize skin contamination.
RESPIRATORY PROTECTION REQUIREMENTS:
Under normal use conditions, with adequate ventilation, no special
handling equipment is required.
MISCELLANEOUS:
Where an apron and protective clothing.
SAFEGUARDS (PERSONNEL):
Wear appropriate personal protective equipment.
INITIAL CONTAINMENT:
Contain spilled material. Floor may become slippery. Wash area to
prevent slipping. Treat or dispose of waste material in accordance with
all local, state/provincial, and national requirements.
NuGenTec
NuBrite B 30 Page 5 of 6
PRD Number: SCC 101 ___ May 30, 2007
LARGE SPILLS PROCEDURE:
Forms smooth, slippery surfaces on floors, posing an accident risk. Flush
spill area with water to wastewater treatment system. After removal,
flush contaminated area thoroughly with water. Or absorb spill with inert
material (e g, dry sand or earth), then place in a chemical waste
container. Treat or dispose of waste material in accordance with all
local, state/provincial, and national requirements.
SMALL SPILLS PROCEDURE:
Floor may become slippery. Wash with water or absorb spills with inert
material. Treat or dispose of waste material in accordance with all
local, state/provincial, and national requirements.
WASTE DISPOSAL:
Treat or dispose of waste material in accordance with all local,
state/provincial, and national requirements. Uncleaned empty containers
should be disposed of in the same manner as the contents. For additional
waste disposal information contact your local NuGenTec representative at
(888) 99-NuGen.
CONTAMINATED MATERIALS:
Wash contaminated clothing before reuse.
CONTAINER DISPOSAL:
Clean out containers prior to disposal.
8. FIRST AID MEASURES
EYE CONTACT FIRST AID:
Flush eye with water for 15 minutes. Get medical attention if irritation
develops or persists.
SKIN CONTACT FIRST AID:
Immediately flush skin with plenty of water. Remove contaminated clothing
and shoes. Get medical attention if irritation develops or persists.
INHALATION FIRST AID:
Although this product is not known to cause respiratory problems, if
breathing is difficult, remove to fresh air and provide oxygen.
INGESTION FIRST AID:
Get medical attention immediately. Do not induce vomiting. Give milk or
water.
STATEMENT OF PRACTICAL TREATMENT:
Always have plenty of water available for first aid.
NOTES TO PHYSICIAN:
Treat patient symptomatically.
NuGenTec
NuBrite B 30 Page 6 of 6
PRD Number: SCC 101 ___ May 30, 2007
9. PREPARATION DATE OF MSDS
PREPARED BY .......: Donato Polignone
APPROVAL DATE .....: May 30, 2007
SUPERCEDES DATE ...: February 27, 2002
PRD NUMBER ........: SCC101 (Official Copy)
ADDITIONAL INFORMATION:
The data in this Material Safety Data Sheet relates only to the specific
material designated herein. It does not relate to use in combination with
any other material or in any process.
**********************************************************************
This information is furnished without warranty, expressed or implied,
except that it is accurate to the best knowledge of NuGeneration
Technologies, LLC. The data on this sheet are related only to the
specific material designated herein. NuGeneration Technologies, LLC
assumes no legal responsibility for use or reliance upon these data.
**********************************************************************
END OF MSDS
**********************************************************************
|