MATERIAL SAFETY DATA SHEET
Emergency: (800) 424-9300, (202) 483-7616, (707) 820-4080
Product Name: DISHMACHINE DE-LIMER AND BRIGHTNER Effective Date: 5/25/07
Product Code: SCS120 Supercedes: 10/20/03
Manufactured By: NuGeneration Technologies, LLC, 100 Professional enter Drive Suite 101Rohnert Park, CA 94928 USA 707-820-4080
fax 707-820-4079
Proper Shipping Name: Cleaning Compound, Corrosive Liquid, UN1760, 8, PG II, ERG #60. Class 55
HAZARDOUS INGREDIENTS
Chemical Name CAS# PCNT% TLV PEL (TWA)
Hydrochloric acid 7647-01-1 < 85 % 5 ppm 5 ppm
Hydrofluoric acid 7664-39-3 1-10 % 3 ppm 3 ppm
PHYSICAL DATA
Boiling Point: 205掳 F pH (as is): <1 Viscosity: 10 cps Vapor Pressure: Not Available
Specific Gravity: 1.120 Evaporation Rate: <1 Solubility: complete Boiling Point: 220 F
Appearance & Odor: Clear Pale Yellow Liquid, Reactivity in Water: None Melting Point: N/A Volatiles: none
Odor Harsh
FIRE & EXPLOSION DATA
NFPA 704 Hazard Rating (4 = Extreme, 3 = High, 2 = Moderate, 1 = Slight, 0 = Minimal):
Health: 4 Slightly Hazardous Flash Point: none to boil
Fire: 0 Above 200掳 F Method Used: Cleveland Open Cup
Reactivity: 0 Stable Flammability Levels (LEL/UEL): N/A
Extinguishing Media: This product is not combustible. Use water spray, foam, carbon dioxide, or dry chemical.
Fire and Explosion Hazard: Will produce hazardous fumes and decomposition products. May produce hazardous flammable/explosive fumes of
hydrogen gas when in contact with some metals. Water solutions are corrosive and toxic. Wear special protective clothing and self contained breathing
apparatus.
Conditions to Avoid: Open flames, welding arcs, or other high temperature sources that induce thermal decomposition, which produce toxic fumes.
REACTIVITY DATA
Materials to Avoid: Strong bases. Chlorine, some metals (aluminum) glass, and oxides. Hazardous Polymerization: Will not occur.
Stability: Stable under normal storage conditions do not store at temperatures above 100 F.
Hazardous Decomposition Products: When heated to decomposition temperatures emits highly toxic HF and Fluoride fumes.
HEALTH HAZARDS
Eye Contact: DANGER 鈥? POISON 鈥? CORROSIVE Skin Contact: DANGER 鈥? POISON 鈥? CORROSIVE
Ingestion: Harmful or FATAL is swallowed. Inhalation: Harmful if inhaled. May cause respiratory burns, dizziness and loss of conciseness.
FIRST AID
Eyes: Flush out immediately for at least 20 minutes with running water and seek medical attention. Washing eyes within one minute is essential to
minimizing eye damage. Hold eyelids apart to ensure flushing of the entire surface. Advise of strong acid and HF contact.
Skin: Immediately flush skin with plenty of clean running water for at least 15 minutes while removing contaminated clothing and shoes. Then as soon
as possible soak area in or contact area with an iced solution of Zephiran (0.13%). Call a physician at once. Advise of strong acid and HF contact.
Ingestion: If swallowed, DO NOT induce vomiting. Give large quantities of water or milk. If vomiting occurs, keep airways clean. Never give
anything by mouth to and unconscious person. Seek medical attention. Advise of strong acid and HF ingestion.
Inhalation: Move person to fresh air and away from exposure. If breathing is difficult, administer oxygen and seek medical attention. Give artificial
respiration if victim is not breathing.
NuGeneration Technologies, LLC www.nugentec.com
100 Professional Center Drive Suite 101, Rohnert Park, CA 94928 USA (707) 820-4080
MATERIAL SAFETY DATA SHEET
Emergency: (800) 424-9300, (202) 483-7616, (707) 820-4080
DISHMACHINE DE-LIMER AND BRIGHTNER
Page 2 of 2
SPILL OR LEAK PROCEDURES
Steps to Contain:
Eliminate all ignition sources (no smoking, flares, sparks or flames in immediate area). Stop leaks if you can do it without risk. Do not touch damaged
containers or spilled material unless wearing appropriate protective clothing (rubber boots, gloves and self contained acid fume resistant breathing
apparatus). Carefully add lime or sodium carbonate to neutralize acid. Then contain spills with dry earth, sand or other non-combustible material and
transfer to containers for proper disposal. Sweep up powder spills and transfer to containers. Dispose of in an approved landfill in accordance with all
local state and federal regulations.
Recommended Waste Disposal Method:
The material as shipped meets the EPA criteria as hazardous waste and, therefore, subject to specific regulations as specified in 40 CFR 261 on the
basis of its corrosivity. Package, store, transport, and dispose of all clean-up materials and any contaminated equipment in accordance with all
applicable federal, state, and local health environmental regulations. Shipments of waste materials are subject to manifesting requirements per
applicable regulations. Ensure that all responsible federal, state, and local agencies receive proper notification of spills and disposal methods.
SPECIAL PROTECTION
Respiratory: Local exhaust is mandatory as fumes from this material are Corrosive and toxic. A NOISH Approved self contained breathing apparatus is
needed for most applications when working with the full strength material, where the TLV of HF is exceeded.
Eye: Chemical goggles.
GLOVES: Rubber gloves covering forearms.
Comments: Full face shield, rubber apron, and rubber boots.
SPECIAL PRECAUTIONS
Storage: Keep in a well ventilated cool, dry place.
Handling: Before handling prepare a dilute aqueous solution of ZEPHIRAN, available from most drug stores (0.13%, 1 part ZEPHIRAN to 750 parts
water). For emergency First Aid, if needed. Do not add to hypochlorite bleaches, chlorine sanitizers, or chlorinated cleaners as they liberate toxic
corrosive chlorine gas. Do not stack or palletize over two high.
USER鈥橲 RESPONISBILITY
It is the user鈥檚 responsibility to provide a safe workplace. He or she should consider the health hazard and safety information contained herein as a
guide and take those precautions required in an individual operation to instruct employees and develop work practice procedures for an safe work
environment.
The information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond
our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to
comply with all applicable federal, state, and local laws and regulations.
ADDITIONAL REGULATORY INFORMATION
This product contains the following chemicals that are subject to the regulations mentioned below. As a supplier of the product, we are required to
inform you of their presence so that you may determine you need to comply. If the chemical listed below is subject to the reporting requirements of
SARA Title III, Section 313 of 40CFR372, you must include the section 313 notice on any copies of redistribution of this MSDS.
NTP/IARC/OSHA Carcinogens: NONE
SARA Title III, CFR372 Hazardous substance notification requirements
Section 302/304: Hydrochloric acid & Hydrofluoric acid
Section 304 (CERCLA: Hydrochloric acid & Hydrofluoric acid
Section 313 Tier I/II: Hydrochloric acid & Hydrofluoric acid
Section 313 Reporting: Hydrochloric acid & Hydrofluoric acid
Proposition 65 (California鈥檚 Safe Water and Toxic Act of 1986): NONE
NuGeneration Technologies, LLC www.nugentec.com
100 Professional Center Drive Suite 101, Rohnert Park, CA 94928 USA (707) 820-4080
|