Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: quantumchemicals_com_au---ethyl_acetate_msds_08-11-2006.asp
                                           ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 1 of 16



Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION


PRODUCT NAME
ETHYL ACETATE

SYNONYMS

C4-H8-O2, CH3CO2CH2CH3, "acetic ether", acetidin, acetoxyethane, "ethyl acetic ester",
"ethyl ethanoate", "vinegar naphtha", "acetic ester"

PROPER SHIPPING NAME
ETHYL ACETATE

PRODUCT USE
The use of a quantity of material in an unventilated or confined space may result in
increased exposure and an irritating atmosphere developing. Before starting consider
control of exposure by mechanical ventilation. Artificial fruit essences; solvent for
nitrocellulose, varnishes, lacquers; in the manufacture of smokeless powder, artificial
leather, photographic films and plates, artificial silk, perfumes; cleaning, textiles,
etc.

SUPPLIER
Company: Quantum Chemicals Pty Ltd
Address:
70 Quantum Close
Dandenong South
Victoria 3175
Telephone: 03 8795 8000
Emergency Tel: 1300 131 001
Fax: 03 8795 8099


HAZARD RATINGS


Flammability
Toxicity
Body Contact
Reactivity
Chronic

SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 2 of 16


Section 2 - HAZARDS IDENTIFICATION


STATEMENT OF HAZARDOUS NATURE
HAZARDOUS SUBSTANCE. DANGEROUS GOODS. According to the Criteria of NOHSC,
and the ADG Code.




POISONS SCHEDULE
None

RISK SAFETY
Highly flammable. Keep away from sources of ignition. No smoking.
Irritating to eyes. Do not breathe gas/ fumes/ vapour/ spray.
HARMFUL - May cause lung damage if swallowed. Avoid contact with eyes.
Repeated exposure may cause skin dryness and Wear suitable protective clothing.
cracking.
Vapours may cause drowsiness and dizziness. Use only in well ventilated areas.
Inhalation and/or skin contact may produce Keep container in a well ventilated place.
health damage*.
May produce discomfort of the respiratory Do not empty into drains.
system*.
* (limited evidence). To clean the floor and all objects contaminated
by this material use water and detergent.
Keep container tightly closed.
Keep away from food drink and animal feeding
stuffs.
Take off immediately all contaminated clothing.
In case of contact with eyes rinse with plenty
of water and contact Doctor or Poisons
Information Centre.
If swallowed IMMEDIATELY contact Doctor or
Poisons Information Centre (show this container
or label).
This material and its container must be disposed
of as hazardous waste.


Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS

NAME CAS RN %
ethyl acetate 141-78-6 >99


Section 4 - FIRST AID MEASURES


SWALLOWED
If spontaneous vomiting appears imminent or occurs, hold patient's head down, lower than
their hips to help avoid possible aspiration of vomitus.
路 Immediately give a glass of water.
路 First aid is not generally required. If in doubt, contact a Poisons Information Centre
or a doctor.
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 3 of 16
Section 4 - FIRST AID MEASURES

EYE
If this product comes in contact with the eyes:
路 Wash out immediately with fresh running water.
路 Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and
moving the eyelids by occasionally lifting the upper and lower lids.
路 If pain persists or recurs seek medical attention.
路 Removal of contact lenses after an eye injury should only be undertaken by skilled
personnel.

SKIN
If skin contact occurs:
路 Immediately remove all contaminated clothing, including footwear.
路 Flush skin and hair with running water (and soap if available).
路 Seek medical attention in event of irritation.

INHALED
路 If fumes or combustion products are inhaled remove from contaminated area.
路 Lay patient down. Keep warm and rested.
路 Prostheses such as false teeth, which may block airway, should be removed, where
possible, prior to initiating first aid procedures.
路 Apply artificial respiration if not breathing, preferably with a demand valve
resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary.
路 Transport to hospital, or doctor.

NOTES TO PHYSICIAN
Any material aspirated during vomiting may produce lung injury. Therefore emesis should
not be induced mechanically or pharmacologically. Mechanical means should be used if it
is considered necessary to evacuate the stomach contents; these include gastric lavage
after endotracheal intubation. If spontaneous vomiting has occurred after ingestion, the
patient should be monitored for difficult breathing, as adverse effects of aspiration
into the lungs may be delayed up to 48 hours.
for simple esters:
--------------------------------------------------------------
BASIC TREATMENT
--------------------------------------------------------------
路 Establish a patent airway with suction where necessary.
路 Watch for signs of respiratory insufficiency and assist ventilation as necessary.
路 Administer oxygen by non-rebreather mask at 10 to 15 l/min.
路 Monitor and treat, where necessary, for pulmonary oedema .
路 Monitor and treat, where necessary, for shock.
路 DO NOT use emetics. Where ingestion is suspected rinse mouth and give up to 200 ml
water (5 ml/kg recommended) for dilution where patient is able to swallow, has a strong
gag reflex and does not drool.
路 Give activated charcoal.
--------------------------------------------------------------
ADVANCED TREATMENT
--------------------------------------------------------------
路 Consider orotracheal or nasotracheal intubation for airway control in unconscious
patient or where respiratory arrest has occurred.
路 Positive-pressure ventilation using a bag-valve mask might be of use.
路 Monitor and treat, where necessary, for arrhythmias.
路 Start an IV D5W TKO. If signs of hypovolaemia are present use lactated Ringers
solution. Fluid overload might create complications.
路 Drug therapy should be considered for pulmonary oedema.
路 Hypotension with signs of hypovolaemia requires the cautious administration of fluids.
Fluid overload might create complications.
路 Treat seizures with diazepam.
路 Proparacaine hydrochloride should be used to assist eye irrigation.
--------------------------------------------------------------
EMERGENCY DEPARTMENT
--------------------------------------------------------------
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 4 of 16
Section 4 - FIRST AID MEASURES

路 Laboratory analysis of complete blood count, serum electrolytes, BUN, creatinine,
glucose, urinalysis, baseline for serum aminotransferases (ALT and AST), calcium,
phosphorus and magnesium, may assist in establishing a treatment regime. Other useful
analyses include anion and osmolar gaps, arterial blood gases (ABGs), chest radiographs
and electrocardiograph.
路 Positive end-expiratory pressure (PEEP)-assisted ventilation may be required for acute
parenchymal injury or adult respiratory distress syndrome.
路 Consult a toxicologist as necessary.
BRONSTEIN, A.C. and CURRANCE, P.L. EMERGENCY CARE FOR HAZARDOUS MATERIALS EXPOSURE: 2nd
Ed. 1994.



Section 5 - FIRE FIGHTING MEASURES


EXTINGUISHING MEDIA
路 Alcohol stable foam.
路 Dry chemical powder.
路 BCF (where regulations permit).
路 Carbon dioxide.
路 Water spray or fog - Large fires only.

FIRE FIGHTING
路 Alert Fire Brigade and tell them location and nature of hazard.
路 May be violently or explosively reactive.
路 Wear breathing apparatus plus protective gloves.
路 Prevent, by any means available, spillage from entering drains or water course.
路 Consider evacuation (or protect in place).
路 Fight fire from a safe distance, with adequate cover.
路 If safe, switch off electrical equipment until vapour fire hazard removed.
路 Use water delivered as a fine spray to control the fire and cool adjacent area.
路 Avoid spraying water onto liquid pools.
路 Do not approach containers suspected to be hot.
路 Cool fire exposed containers with water spray from a protected location.
路 If safe to do so, remove containers from path of fire.

FIRE/EXPLOSION HAZARD
路 Liquid and vapour are highly flammable.
路 Severe fire hazard when exposed to heat, flame and/or oxidisers.
路 Vapour may travel a considerable distance to source of ignition.
路 Heating may cause expansion or decomposition leading to violent rupture of containers.
路 On combustion, may emit toxic fumes of carbon monoxide (CO).
Combustion products include: carbon dioxide (CO2), other pyrolysis products typical of
burning organic material.
Contains low boiling substance: Closed containers may rupture due to pressure
buildup under fire conditions.

FIRE INCOMPATIBILITY
Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine
bleaches, pool chlorine etc. as ignition may result.

HAZCHEM: 3[Y]E

Personal Protective Equipment
Chemical splash suit.
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 5 of 16


Section 6 - ACCIDENTAL RELEASE MEASURES


EMERGENCY PROCEDURES

MINOR SPILLS
路 Remove all ignition sources.
路 Clean up all spills immediately.
路 Avoid breathing vapours and contact with skin and eyes.
路 Control personal contact by using protective equipment.
路 Contain and absorb small quantities with vermiculite or other absorbent material.
路 Wipe up.
路 Collect residues in a flammable waste container.

MAJOR SPILLS
Chemical Class: ester and ethers

For release onto land: recommended sorbents listed in order of priority.




SORBENT TYPE RANK APPLICATION COLLECTION LIMITATIONS


LAND SPILL - SMALL


cross- linked 1 shovel shovel R, W, SS
polymer -
particulate
cross- linked 1 throw pitchfork R, DGC, RT
polymer - pillow
sorbent clay - 2 shovel shovel R, I, P
particulate
wood fiber - 3 shovel shovel R, W, P, DGC
particulate
wood fiber - 3 throw pitchfork R, P, DGC, RT
pillow
treated wood fiber 3 throw pitchfork DGC, RT
- pillow


LAND SPILL - MEDIUM


cross- linked 1 blower skiploader R, W, SS
polymer -
particulate
cross- linked 2 throw skiploader R, DGC, RT
polymer - pillow
sorbent clay - 3 blower skiploader R, I, P
particulate
polypropylene - 3 blower skiploader W, SS, DGC
particulate
expanded mineral - 4 blower skiploader R, I, W, P, DGC
particulate
wood fiber - 4 blower skiploader R, W, P, DGC
particulate
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 6 of 16
Section 6 - ACCIDENTAL RELEASE MEASURES


Legend
DGC: Not effective where ground cover is dense
R; Not reusable
I: Not incinerable
P: Effectiveness reduced when rainy
RT:Not effective where terrain is rugged
SS: Not for use within environmentally sensitive sites
W: Effectiveness reduced when windy

Reference: Sorbents for Liquid Hazardous Substance Cleanup and Control;
R.W Melvold et al: Pollution Technology Review No. 150: Noyes Data Corporation 1988.
路 Clear area of personnel and move upwind.
路 Alert Fire Brigade and tell them location and nature of hazard.
路 May be violently or explosively reactive.
路 Wear breathing apparatus plus protective gloves.
路 Prevent, by any means available, spillage from entering drains or water course.
路 Consider evacuation (or protect in place).
路 No smoking, naked lights or ignition sources.
路 Increase ventilation.
路 Stop leak if safe to do so.
路 Water spray or fog may be used to disperse /absorb vapour.
路 Contain spill with sand, earth or vermiculite.
路 Use only spark-free shovels and explosion proof equipment.
路 Collect recoverable product into labelled containers for recycling.
路 Absorb remaining product with sand, earth or vermiculite.
路 Collect solid residues and seal in labelled drums for disposal.
路 Wash area and prevent runoff into drains.
路 If contamination of drains or waterways occurs, advise emergency services.

PROTECTIVE ACTIONS FOR SPILL
PROTECTIVE ACTION ZONE

half
evacuation
downwind
direction
distance
down wind distance
wind isolation
distance
direction
half
evacuation downwind
INITIAL direction distance
ISOLATION
ZONE

From IERG (Canada/Australia)
Isolation Distance 50 metres
Downwind Protection Distance 300 metres
IERG Number 18

FOOTNOTES
1 PROTECTIVE ACTION ZONE is defined as the area in which people are at risk of harmful exposure. This zone
assumes that random changes in wind direction confines the vapour plume to an area within 30 degrees on
either side of the predominant wind direction, resulting in a crosswind protective action distance equal
to the downwind protective action distance.
2 PROTECTIVE ACTIONS should be initiated to the extent possible, beginning with those closest to the spill
and working away from the site in the downwind direction. Within the protective action zone a level of
vapour concentration may exist resulting in nearly all unprotected persons becoming incapacitated and
unable to take protective action and/or incurring serious or irreversible health effects.
3 INITIAL ISOLATION ZONE is determined as an area, including upwind of the incident, within which a high
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 7 of 16
Section 6 - ACCIDENTAL RELEASE MEASURES

probability of localised wind reversal may expose nearly all persons without appropriate protection to
life-threatening concentrations of the material.
4 SMALL SPILLS involve a leaking package of 200 litres (55 US gallons) or less, such as a drum (jerrican or
box with inner containers). Larger packages leaking less than 200 litres and compressed gas leaking from
a small cylinder are also considered "small spills".
LARGE SPILLS involve many small leaking packages or a leaking package of greater than 200 litres, such as
a cargo tank, portable tank or a "one-tonne" compressed gas cylinder.
5 Guide 129 is taken from the US DOT emergency response guide book.
6 IERG information is derived from CANUTEC - Transport Canada.

EMERGENCY RESPONSE PLANNING GUIDELINES (ERPG)
The maximum airborne concentration below which it is believed that nearly all individuals could be exposed
for up to one hour WITHOUT experiencing or developing

life-threatening health effects is:
ethyl acetate 2000 ppm

irreversible or other serious effects or symptoms which could impair an individual's ability to take
protective action is:
ethyl acetate 400 ppm

other than mild, transient adverse effects without perceiving a clearly defined odour is:
ethyl acetate 400 ppm

The threshold concentration below which most people will experience no appreciable risk of health effects:
ethyl acetate 400 ppm

American Industrial Hygiene Association (AIHA)

Ingredients considered according to the following cutoffs
Very Toxic (T+) >= 0.1% Toxic (T) >= 3.0%
R50 >= 0.25% Corrosive (C) >= 5.0%
R51 >= 2.5%
else >= 10%
where percentage is percentage of ingredient found in the mixture

Personal Protective Equipment advice is contained in Section 8 of the MSDS.


Section 7 - HANDLING AND STORAGE


PROCEDURE FOR HANDLING
路 Containers, even those that have been emptied, may contain explosive vapours.
路 Do NOT cut, drill, grind, weld or perform similar operations on or near containers.
路 Avoid all personal contact, including inhalation.
路 Wear protective clothing when risk of exposure occurs.
路 Use in a well-ventilated area.
路 Prevent concentration in hollows and sumps.
路 DO NOT enter confined spaces until atmosphere has been checked.
路 Avoid smoking, naked lights, heat or ignition sources.
路 When handling, DO NOT eat, drink or smoke.
路 Vapour may ignite on pumping or pouring due to static electricity.
路 DO NOT use plastic buckets.
路 Earth and secure metal containers when dispensing or pouring product.
路 Use spark-free tools when handling.
路 Avoid contact with incompatible materials.
路 Keep containers securely sealed.
路 Avoid physical damage to containers.
路 Always wash hands with soap and water after handling.
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 8 of 16
Section 7 - HANDLING AND STORAGE

路 Work clothes should be laundered separately.
路 Use good occupational work practice.
路 Observe manufacturer's storing and handling recommendations.
路 Atmosphere should be regularly checked against established exposure standards to
ensure safe working conditions.

SUITABLE CONTAINER
路 Packing as supplied by manufacturer.
路 Plastic containers may only be used if approved for flammable liquid.
路 Check that containers are clearly labelled and free from leaks.
路 For low viscosity materials (i) : Drums and jerry cans must be of the non-removable
head type. (ii) : Where a can is to be used as an inner package, the can must have a
screwed enclosure.
路 For materials with a viscosity of at least 2680 cSt. (23 deg. C)
路 For manufactured product having a viscosity of at least 250 cSt. (23 deg. C)
路 Manufactured product that requires stirring before use and having a viscosity of at
least 20 cSt (25 deg. C)
(i) : Removable head packaging;
(ii) : Cans with friction closures and
(iii) : low pressure tubes and cartridges may be used.
路 Where combination packages are used, and the inner packages are of glass, there must be
sufficient inert cushioning material in contact with inner and outer packages
路 In addition, where inner packagings are glass and contain liquids of packing group I
there must be sufficient inert absorbent to absorb any spillage, unless the outer
packaging is a close fitting moulded plastic box and the substances are not incompatible
with the plastic.

STORAGE INCOMPATIBILITY
路 Esters react with acids to liberate heat along with alcohols and acids.
路 Strong oxidising acids may cause a vigorous reaction with esters that is sufficiently
exothermic to ignite the reaction products.
路 Heat is also generated by the interaction of esters with caustic solutions.
路 Flammable hydrogen is generated by mixing esters with alkali metals and hydrides.
路 Esters may be incompatible with aliphatic amines and nitrates.
Avoid reaction with oxidising agents.

STORAGE REQUIREMENTS
路 Store in original containers in approved flame-proof area.
路 No smoking, naked lights, heat or ignition sources.
路 DO NOT store in pits, depressions, basements or areas where vapours may be trapped.
路 Keep containers securely sealed.
路 Store away from incompatible materials in a cool, dry well ventilated area.
路 Protect containers against physical damage and check regularly for leaks.
路 Observe manufacturer's storing and handling recommendations.
_____________________________________________________

SAFE STORAGE WITH OTHER CLASSIFIED CHEMICALS


+ X X X X +
_____________________________________________________
+: May be stored together
O: May be stored together with specific preventions
X: Must not be stored together
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 9 of 16


Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION


EXPOSURE CONTROLS
Source Material TWA ppm TWA mg/m鲁 STEL ppm STEL mg/m鲁
_________ _________ _____ _____ _____ _____
Australia ethyl acetate 200 720 400 1440
Exposure (Ethyl acetate)
Standards


EMERGENCY EXPOSURE LIMITS
Material Revised IDLH Value (mg/m3) Revised IDLH Value (ppm)
ethyl acetate 2, 000 [LEL]

NOTES
Values marked LEL indicate that the IDLH was based on 10% of the lower explosive limit
for safety considerations even though the relevant toxicological data indicated that
irreversible health effects or impairment of escape existed only at higher
concentrations.


ODOUR SAFETY FACTOR (OSF)
OSF=51 (ETHYL ACETATE)

MATERIAL DATA
Exposed individuals are reasonably expected to be warned, by smell, that the Exposure
Standard is being exceeded.
Odour Safety Factor (OSF) is determined to fall into either Class A or B.
The Odour Safety Factor (OSF) is defined as:
OSF= Exposure Standard (TWA) ppm/ Odour Threshold Value (OTV) ppm
Classification into classes follows:

Class OSF Description
A 550 Over 90% of exposed individuals
are aware by smell that the
Exposure Standard (TLV- TWA for
example) is being reached, even
when distracted by working
activities
B 26- 550 As " A" for 50- 90% of persons
being distracted
C 1- 26 As " A" for less than 50% of
persons being distracted
D 0.18- 1 10- 50% of persons aware of
being tested perceive by smell
that the Exposure Standard is
being reached
E <0.18 As " D" for less than 10% of
persons aware of being tested

.
Odour Threshold Value: 6.4-50 ppm (detection), 13.3-75 ppm (recognition)
The TLV-TWA provides a significant margin of safety from the standpoint of
adverse health effects. Unacclimated subjects found the odour
objectionably strong at 200 ppm. Mild nose, eye and throat irritation was
experienced at 400 ppm. Workers exposed regularly at concentrations
ranging from 375 ppm to 1500 ppm for several months showed no unusual
signs or symptoms.
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 10 of 16
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

PERSONAL PROTECTION




EYE
路 Safety glasses with side shields.
路 Chemical goggles.
路 Contact lenses may pose a special hazard; soft contact lenses may absorb and
concentrate irritants. A written policy document, describing the wearing of lens or
restrictions on use, should be created for each workplace or task. This should include a
review of lens absorption and adsorption for the class of chemicals in use and an account
of injury experience. Medical and first-aid personnel should be trained in their removal
and suitable equipment should be readily available. In the event of chemical exposure,
begin eye irrigation immediately and remove contact lens as soon as practicable. Lens
should be removed at the first signs of eye redness or irritation - lens should be
removed in a clean environment only after workers have washed hands thoroughly. [CDC
NIOSH Current Intelligence Bulletin 59].

HANDS/FEET
Suitability and durability of glove type is dependent on usage. Factors such as:
路 frequency and duration of contact,
路 chemical resistance of glove material,
路 glove thickness and
路 dexterity,
are important in the selection of gloves.
Wear chemical protective gloves, eg. PVC.
Wear safety footwear or safety gumboots, eg. Rubber.

OTHER
路 Overalls.
路 PVC Apron.
路 PVC protective suit may be required if exposure severe.
路 Eyewash unit.
路 Ensure there is ready access to a safety shower.

GLOVE SELECTION INDEX
Glove selection is based on a modified presentation of the:
" Forsberg Clothing Performance Index" .
The effect(s) of the following substance(s) are taken into account in the
computer- generated selection: ethyl acetate

Protective Material CPI *.
__________________________________________
PE/EVAL/PE A
PVA A
SARANEX- 23 2- PLY A
TEFLON B
VITON/CHLOROBUTYL B
BUTYL B
BUTYL/NEOPRENE C
CPE C
SARANEX- 23 C
HYPALON C
NEOPRENE/NATURAL C
NITRILE+PVC C
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 11 of 16
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

PVC C
NEOPRENE C
NATURAL RUBBER C
NITRILE C
NATURAL+NEOPRENE C
__________________________________________
* CPI - Chemwatch Performance Index
A: Best Selection
B: Satisfactory; may degrade after 4 hours continuous immersion
C: Poor to Dangerous Choice for other than short term immersion
NOTE: As a series of factors will influence the actual performance of the glove,
a final selection must be based on detailed observation. -
* Where the glove is to be used on a short term, casual or infrequent basis,
factors such as "feel" or convenience (e.g. disposability), may dictate a choice
of gloves which might otherwise be unsuitable following long-term or frequent use.
A qualified practitioner should be consulted.

RESPIRATOR
Selection of the Class and Type of respirator will depend upon the level of breathing
zone contaminant and the chemical nature of the contaminant. Protection Factors (defined
as the ratio of contaminant outside and inside the mask) may also be important.

Breathing Zone Level Maximum Protection Half- face Respirator Full- Face Respirator
ppm (volume) Factor
1000 10 A- AUS -
1000 50 - A- AUS
5000 50 Airline * -
5000 100 - A- 2
10000 100 - A- 3
100+ Airline**

* - Continuous Flow ** - Continuous-flow or positive pressure demand.

The local concentration of material, quantity and conditions of use determine the type of
personal protective equipment required.
For further information consult site specific
CHEMWATCH data (if available), or your
Occupational Health and Safety Advisor.

ENGINEERING CONTROLS
For flammable liquids and flammable gases, local exhaust ventilation or a process
enclosure ventilation system may be required. Ventilation equipment should be explosion
-resistant.
Air contaminants generated in the workplace possess varying "escape" velocities which, in
turn, determine the "capture velocities" of fresh circulating air required to effectively
remove the contaminant.


Type of Contaminant: Air Speed:
solvent, vapours, degreasing etc., evaporating 0.25- 0.5 m/s (50- 100 f/min.)
from tank (in still air).
aerosols, fumes from pouring operations, 0.5- 1 m/s (100- 200 f/min.)
intermittent container filling, low speed
conveyer transfers, welding, spray drift,
plating acid fumes, pickling (released at low
velocity into zone of active generation)
direct spray, spray painting in shallow booths, 1- 2.5 m/s (200- 500 f/min.)
drum filling, conveyer loading, crusher dusts,
gas discharge (active generation into zone of
rapid air motion)
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 12 of 16
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION


Within each range the appropriate value depends on:


Lower end of the range Upper end of the range
1: Room air currents minimal or favourable to 1: Disturbing room air currents
capture
2: Contaminants of low toxicity or of nuisance 2: Contaminants of high toxicity
value only.
3: Intermittent, low production. 3: High production, heavy use
4: Large hood or large air mass in motion 4: Small hood- local control only


Simple theory shows that air velocity falls rapidly with distance away from the opening
of a simple extraction pipe. Velocity generally decreases with the square of distance
from the extraction point (in simple cases). Therefore the air speed at the extraction
point should be adjusted, accordingly, after reference to distance from the contaminating
source. The air velocity at the extraction fan, for example, should be a minimum of 1-2
m/s (200-400 f/min.) for extraction of solvents generated in a tank 2 meters distant from
the extraction point. Other mechanical considerations, producing performance deficits
within the extraction apparatus, make it essential that theoretical air velocities are
multiplied by factors of 10 or more when extraction systems are installed or used.


Section 9 - PHYSICAL AND CHEMICAL PROPERTIES


APPEARANCE
Clear colourless highly flammable liquid; floats on water. Solubility in water = 8.7%.
Characteristic, fruity non- residual odour. Odour at 200 ppm is considered objectionably
strong.

PHYSICAL PROPERTIES
Liquid.
Does not mix with water.
Floats on water.

Molecular Weight: 88.1 Boiling Range (掳C): 77
Melting Range (掳C): - 83 Specific Gravity (water=1): 0.90
Solubility in water (g/L): Immiscible pH (as supplied): Not applicable
pH (1% solution): Not applicable. Vapour Pressure (kPa): 10.1 @ 20C
Volatile Component (%vol): 100 Evaporation Rate: 6.15 BuAc=1
Relative Vapour Density (air=1): 3.0 Flash Point (掳C): - 4.4 (TCC)
Lower Explosive Limit (%): 2.2 Upper Explosive Limit (%): 11.0
Autoignition Temp (掳C): 427 Decomposition Temp (掳C): Not available.
State: Liquid Viscosity: Not Available


Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION


CONDITIONS CONTRIBUTING TO INSTABILITY
路 Presence of incompatible materials.
路 Product is considered stable.
路 Hazardous polymerisation will not occur.
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 13 of 16


Section 11 - TOXICOLOGICAL INFORMATION


POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS

SWALLOWED
Swallowing of the liquid may cause aspiration into the lungs with the risk of chemical
pneumonitis; serious consequences may result. (ICSC13733).
Although ingestion is not thought to produce harmful effects (as classified under EC
Directives), the material may still be damaging to the health of the individual,
following ingestion, especially where pre-existing organ (e.g. liver, kidney) damage is
evident. Present definitions of harmful or toxic substances are generally based on doses
producing mortality rather than those producing morbidity (disease, ill-health).
Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational
setting however, ingestion of insignificant quantities is not thought to be cause for
concern.

EYE
This material can cause eye irritation and damage in some persons.
The liquid produces a high level of eye discomfort and is capable of causing pain and
severe conjunctivitis. Corneal injury may develop, with possible permanent impairment of
vision, if not promptly and adequately treated.

SKIN
Skin contact with the material may damage the health of the individual; systemic effects
may result following absorption.
The liquid may be miscible with fats or oils and may degrease the skin, producing a skin
reaction described as non-allergic contact dermatitis. The material is unlikely to
produce an irritant dermatitis as described in EC Directives .
Repeated exposure may cause skin cracking, flaking or drying following normal handling
and use.
Entry into the blood-stream, through, for example, cuts, abrasions or lesions, may
produce systemic injury with harmful effects. Examine the skin prior to the use of the
material and ensure that any external damage is suitably protected.

INHALED
Inhalation of vapours or aerosols (mists, fumes), generated by the material during the
course of normal handling, may be damaging to the health of the individual.
There is some evidence to suggest that the material can cause respiratory irritation in
some persons. The body's response to such irritation can cause further lung damage.
Inhalation hazard is increased at higher temperatures.
Inhalation of vapours may cause drowsiness and dizziness. This may be accompanied by
sleepiness, reduced alertness, loss of reflexes, lack of co-ordination, and vertigo.
The main effects of simple esters are irritation, stupor and insensibility. Headache,
drowsiness, dizziness, coma and behavioural changes may occur. Respiratory symptoms may
include irritation, shortness of breath, rapid breathing, throat inflammation, bronchitis
, lung inflammation and pulmonary oedema, sometimes delayed. Nausea, vomiting, diarrhoea
and cramps are observed. Liver and kidney damage may result from massive exposures.
The use of a quantity of material in an unventilated or confined space may result in
increased exposure and an irritating atmosphere developing.
Before starting consider control of exposure by mechanical ventilation.
Acute effects from inhalation of high vapour concentrations may be chest and nasal
irritation with coughing, sneezing, headache and even nausea.

CHRONIC HEALTH EFFECTS
Long-term exposure to the product is not thought to produce chronic effects adverse to
the health (as classified by EC Directives using animal models); nevertheless exposure by
all routes should be minimised as a matter of course.
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 14 of 16
Section 11 - TOXICOLOGICAL INFORMATION

TOXICITY AND IRRITATION
unless otherwise specified data extracted from RTECS - Register of Toxic Effects of Chemical Substances.
TOXICITY IRRITATION
Oral (rat) LD50: 5620 mg/kg Eye (human): 400 ppm
Inhalation (rat) LC50: 1600 ppm/8h
Inhalation (human) TCLo: 400 ppm
Inhalation (Human) TCLo: 400 ppm/4h
Oral (Mouse) LD50: 4100 mg/kg
Intraperitoneal (Mouse) LD50: 709 mg/kg
Oral (Rabbit) LD50: 4935 mg/kg
Oral (Guinea) pig: LD50 5500 mg/kg



Section 12 - ECOLOGICAL INFORMATION

log Pow (Verschueren 1983): 0.66/0.73
ThOD: 50.4
log Pow (Verschueren 1983): 0.66/0.73
BOD5: 15%
COD: 1.54 (83%)
ThOD: 1.82
Half- life Soil - High (hours): 168
Half- life Soil - Low (hours): 24
Half- life Air - High (hours): 353
Half- life Air - Low (hours): 35.3
Half- life Surface water - High (hours): 168
Half- life Surface water - Low (hours): 24
Half- life Ground water - High (hours): 336
Half- life Ground water - Low (hours): 48
Aqueous biodegradation - Aerobic - High (hours): 168
Aqueous biodegradation - Aerobic - Low (hours): 24
Aqueous biodegradation - Anaerobic - High (hours): 672
Aqueous biodegradation - Anaerobic - Low (hours): 96
Aqueous biodegradation - Removal secondary treatment - High (hours): 96%
Aqueous biodegradation - Removal secondary treatment - Low (hours): 99.90%
Photooxidation half- life water - High (hours): 9.60E+05
Photooxidation half- life water - Low (hours): 24090
Photooxidation half- life air - High (hours): 353
Photooxidation half- life air - Low (hours): 35.3
First order hydrolysis half- life (hours): 1.77E+04
Acid rate constant [M(H+)- HR]- 1: 3.05E- 08
Base rate constant [MOH)- HR]- 1: 2.99E- 05

DO NOT discharge into sewer or waterways.
log Kow: 0.66-0.73
Half-life (hr) air: 200
Half-life (hr) H2O surface water: 10
Henry's atm m鲁 /mol: 1.20E-04
BOD 5 if unstated: 0.1-1.24,16-36%
COD: 1.54,83%
ThOD: 1.82


Section 13 - DISPOSAL CONSIDERATIONS

路 Recycle wherever possible.
路 Consult manufacturer for recycling options or consult local or regional waste
management authority for disposal if no suitable treatment or disposal facility can be
identified.
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 15 of 16
Section 13 - DISPOSAL CONSIDERATIONS

路 Dispose of by: Burial in a licenced land-fill or Incineration in a licenced apparatus
(after admixture with suitable combustible material).
路 Decontaminate empty containers. Observe all label safeguards until containers are
cleaned and destroyed.


Section 14 - TRANSPORTATION INFORMATION




Labels Required: FLAMMABLE LIQUID
HAZCHEM: 3[Y]E

UNDG:
Dangerous Goods Class: 3 Subrisk: None
UN Number: 1173 Packing Group: II
Shipping Name:ETHYL ACETATE

Air Transport IATA:
ICAO/IATA Class: 3 ICAO/IATA Subrisk: None
UN/ID Number: 1173 Packing Group: II
Special provisions: None
Shipping Name: ETHYL ACETATE

Maritime Transport IMDG:
IMDG Class: 3 IMDG Subrisk: None
UN Number: 1173 Packing Group: II
EMS Number: F- E, S- D Special provisions: None
Shipping Name: ETHYL ACETATE


Section 15 - REGULATORY INFORMATION


POISONS SCHEDULE: None

REGULATIONS
ethyl acetate (CAS: 141-78-6) is found on the following regulatory lists;
Australia Exposure Standards
Australia High Volume Industrial Chemical List (HVICL)
Australia Inventory of Chemical Substances (AICS)
Australia National Pollutant Inventory
IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried in Bulk
International Council of Chemical Associations (ICCA) - High Production Volume List
OECD Representative List of High Production Volume (HPV) Chemicals



Section 16 - OTHER INFORMATION


MSDS SECTION CHANGES
The following table displays the version number of and date on which each section was last changed.
Section Name Version Date Section Name Version Date Section Name Version Date
Advice to Doctor 4 8- Nov- 2006 Storage (suitable 4 8- Nov- 2006 Acute Health 4 8- Nov- 2006
container) (inhaled)
First Aid (eye) 4 8- Nov- 2006 Engineering 4 8- Nov- 2006 Acute Health 4 8- Nov- 2006
Control (skin)
First Aid 4 8- Nov- 2006 Personal 4 8- Nov- 2006 Acute Health 4 8- Nov- 2006
(swallowed) Protection (eye) (swallowed)
ETHYL ACETATE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 8-Nov-2006 CHEMWATCH 1173
NC317TCP Version No:4
CD 2007/3 Page 16 of 16
Section 16 - OTHER INFORMATION
Fire Fighter 4 8- Nov- 2006 Personal 4 8- Nov- 2006 Chronic Health 4 8- Nov- 2006
(extinguishing Protection
media) (hands/feet)
Fire Fighter (fire 4 8- Nov- 2006 Personal 4 8- Nov- 2006 Toxicity and 4 8- Nov- 2006
incompatibility) Protection (other) Irritation
(Toxicity Figure)
Fire Fighter 4 8- Nov- 2006 Appearance 4 8- Nov- 2006 Environmental 4 8- Nov- 2006
(fire/explosion
hazard)
Spills (major) 4 8- Nov- 2006 Physical 4 8- Nov- 2006 Disposal 4 8- Nov- 2006
Properties
Handling Procedure 4 8- Nov- 2006 Acute Health (eye) 4 8- Nov- 2006 Transport 4 8- Nov- 2006
Storage (storage 4 8- Nov- 2006
incompatibility)


Classification of the preparation and its individual components has drawn on official and
authoritative sources as well as independent review by the Chemwatch Classification
committee using available literature references.

This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or
criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written permission
from CHEMWATCH. TEL (+61 3) 9572 4700.

Issue Date: 8-Nov-2006
Print Date: 19-Dec-2007

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
quantumchemicals_com_au---boric_acid_msds_13-11-2006.asp N/A
quantumchemicals_com_au---brilliant_blue_msds_16-08-2006.asp N/A
quantumchemicals_com_au---butyl_glycol_acetate_msds_12-09-2006.asp N/A
quantumchemicals_com_au---calciumstearate_msds_april2005.asp N/A
quantumchemicals_com_au---calcium_carbonate_msds_24-05-2007.asp N/A
quantumchemicals_com_au---calcium_chloride_msds_23-04-2005.asp N/A
quantumchemicals_com_au---calcium_cyclamate_msds_12-02-2007.asp N/A
quantumchemicals_com_au---calcium_propionate_msds_16-08-2006.asp N/A
quantumchemicals_com_au---calcium_sulphate_msds_22-01-2006.asp N/A
quantumchemicals_com_au---capric_caprylic_triglycerides_msds_01-01-2005.asp N/A
quantumchemicals_com_au---carboxymethylcellulose_msds_may2003.asp N/A
quantumchemicals_com_au---carmoisine_msds_12-05-2005.asp N/A
quantumchemicals_com_au---castor_oil_msds_04-04-2007.asp N/A
quantumchemicals_com_au---caustic_soda_prill_msds_25-05-2007.asp N/A
quantumchemicals_com_au---cetyl_alcohol_msds_03-08-2006.asp N/A
quantumchemicals_com_au---chlorhexidine_gluconate_20_msds_06-07-2007.asp N/A
quantumchemicals_com_au---chlorinated_paraffin_msds_02-05-2007.asp N/A
quantumchemicals_com_au---choline_chloride_msds_12-05-2005.asp N/A
quantumchemicals_com_au---citric_acid_monohydrate_msds_02-10-2006.asp N/A
quantumchemicals_com_au---citric_acid_msds_20-03-2006.asp N/A
quantumchemicals_com_au---cobaltsulphateheptahydrate_msds_april2005.asp N/A
quantumchemicals_com_au---cod_liver_oil_msds_18-07-2006.asp N/A
quantumchemicals_com_au---creosote_oil_32_msds_19-07-2003.asp N/A
quantumchemicals_com_au---cumene_hydroperoxide_90_msds_12-05-2005.asp N/A
quantumchemicals_com_au---cyclohexanol_msds_jan2006.asp N/A
quantumchemicals_com_au---cyclohexanone_msds_jul2006.asp N/A
quantumchemicals_com_au---d-limonene_msds_feb2006.asp N/A
quantumchemicals_com_au---dextrin_msds_jul2005.asp N/A
quantumchemicals_com_au---dextrosemonohydrate_msds_aug2005.asp N/A
quantumchemicals_com_au---diammonium_phosphate_msds_12-07-2006.asp N/A
quantumchemicals_com_au---dibutyl_phthalate_msds_26-03-2007.asp N/A
quantumchemicals_com_au---dicalcium_phosphate_feed_grade_powder_msds_08-08-2007.asp N/A
quantumchemicals_com_au---dicyandiamide_msds_09-03-2007.asp N/A
quantumchemicals_com_au---diethanolamine_msds_aug2006.asp N/A
quantumchemicals_com_au---diethylamine_msds_jun2005.asp N/A
quantumchemicals_com_au---diethylformamide_msds_aug2006.asp N/A
quantumchemicals_com_au---diisobutyl_ketone_msds_02-06-2006.asp N/A
quantumchemicals_com_au---diisodecyl_phthalate_msds_16-02-2007.asp N/A
quantumchemicals_com_au---diisononyl_phthalate_msds_26-03-2007.asp N/A
quantumchemicals_com_au---dioctyl_phthalate_msds_24-07-2006.asp N/A
quantumchemicals_com_au---dipentene_msds_dec2005.asp N/A
quantumchemicals_com_au---disodiumoctobrate_msds_feb2005.asp N/A
quantumchemicals_com_au---di_acetone_alcohol_msds_22-07-2005.asp N/A
quantumchemicals_com_au---di_ethylene_glycol_msds_04-06-2007.asp N/A
quantumchemicals_com_au---edta_acid_msds_16-08-2006.asp N/A
quantumchemicals_com_au---edta_disodium_salt_msds_19-07-2006.asp N/A
quantumchemicals_com_au---epoxidised_soya_bean_oil_msds_02-05-2007.asp N/A
quantumchemicals_com_au---ethoxylates_msds_aug2006.asp N/A
quantumchemicals_com_au---ethyl_acetate_msds_08-11-2006.asp N/A
quantumchemicals_com_au---ethyl_acrylate_msds_24-06-2005.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC