MSDS Number: 225 Polyurethane Floor Finish Satin Printing Date: 10/04/2006 Page 1 of 4
Material Safety Data Sheet
For Coatings, Resins and Related Materials
NOTE: 聽 CHEMTREC, CANUTEC and National Response Center emergency numbers to be used only in the event of
chemical emergencies involving a spill, leak, fire, exposure or accident involving chemicals
24 Hour Emergency:聽 1-800-123-4567 CHEMTREC:聽 1-800-424-9300
National Response in Canada聽 CANUTEC:聽 613-996-6666
Outside U.S. and Canada聽 Chemtrec: 聽 202-483-7616
Section 1 - Chemical Product / Company Information
Product Name: Polyurethane Floor Finish Satin Revision Date: 01/19/2006
Identification Number: 225 Print Date: 10/04/2006
聽 聽
Product Use/Class: POLYUETHANE
Manufacturer: Deft, Inc.聽 (CAGE CODE 33461) Information Phone: (949) 474-0400
17451 Von Karman Ave Emergency Phone: (800) 424-9300
Irvine, Ca.聽 92614
Section 2 - Hazards Identification
*** Emergency Overview ***:聽 Combustible liquid. Harmful by inhalation, in contact with skin, and if swallowed. Amber
liquid with solvent odor. Contact with eyes or skin causes irritation.
Effects Of Overexposure - Eye Contact: 聽 Exposure to liquid, aerosol, or vapors may cause irritation, tearing, redness, and
swelling accompanied by a stinging sensation. Damage may occur to the cornea or lens of the eye. Direct eye contact may
cause irritation.
Effects Of Overexposure - Skin Contact: 聽 Prolonged and repeated skin contact may cause dermatitis, drying, and defatting
due to the solvent properties. Direct skin contact may cause irritation. Symptoms may include swelling, redness, and rash.
Effects Of Overexposure - Inhalation: 聽 Respiratory depression, failure, or death may result from overexposure. Inhalation
may cause headaches, difficult breathing, and loss of consciousness. Inhalation may cause irritation to the respiratory tract
(nose, mouth, mucous membranes) & acute nervous system depression characterized by the following progressive steps:
headache, dizziness, staggering gait, confusion, unconsciousness, or coma.
Effects Of Overexposure - Ingestion:聽聽 May result in possible corrosive action in the mouth, stomach tissue and digestive
tract. Vomiting may cause aspiration of the solvent, resulting in chemical pneumonitis. Ingestion may cause a burning
sensation in the mouth and esophagus. Ingestion may cause gastrointestinal irritation, abdominal pain, nausea, vomiting
and diarrhea.
Effects Of Overexposure - Chronic Hazards:聽 A component(s) has been shown to cause blood abnormalities, lower activity
of certain immune system cells, effects the hearing, mild reversible liver effects, central nervous damage, and cataracts in
laboratory animals. Prolonged contact will cause drying and cracking of the skin, due to defatting action. Skin sensitization,
asthma or other allergic responses may develop. Listed as a Carcinogen: NTP? : No, IARC Monographs? : No, OSHA
regulated? : No.
Primary Route(s) Of Entry:聽 Skin Contact, Skin Absorption, Inhalation, Ingestion, Eye Contact
Section 3 - Composition / Information On Ingredients
Component CAS Number Weight % Reporting Ranges
MINERAL SPIRITS 8052-41-3 30-60
AROMATIC HYDROCARBON 64742-95-6 3-7
1,2,4 TRIMETHYLBENZENE 95-63-6 1-5
ANTI-SKIN AGENT 96-29-7 0.1-1.0
PAINT DRIER 22464-99-9 0.1-1.0
聽
THE ABOVE LISTED PRODUCTS ARE ON THE TSCA INVENTORY LIST.聽 ALSO ANY UNLISTED INGREDIENTS.
聽
Section 4 - First Aid Measures
First Aid - Eye Contact:聽 If eyes are irritated from airborne exposure, move to fresh air. If material gets into eyes, flush with
water immediately for 15 minutes. Consult a physician. Hold eyelids open to rinse out the entire eye.
First Aid - Skin Contact:聽 In case of contact, immediately flush skin with plenty of water and wash affected areas
thoroughly with soap and water. Remove contaminated clothing and shoes.
First Aid - Inhalation:聽 Asthmatic type symptoms may develop and maybe immediate or delayed by several hours. In the
case of inhalation of aerosol/mist consult a physician, if necessary. Move to fresh air in case of accidental inhalation of
vapors.
First Aid - Ingestion:聽 Do not induce vomiting. Do not give anything to an unconscious person. Obtain medical help.
Section 5 - Fire Fighting Measures
MSDS Number: 225 Polyurethane Floor Finish Satin Printing Date: 10/04/2006 Page 2 of 4
Flash Point (掳F): 105 TCC LOWER EXPLOSIVE LIMIT (%): 0.9UPPER EXPLOSIVE LIMIT (%): 7.0
Extinguishing Media: Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Fog, Water Spray
Unusual Fire And Explosion Hazards: Toxic gases may form when product burns. Application to hot surfaces requires
special precautions. Remove all sources of ignition. Fire or intense heat may cause violent rupture of packages. Vapors can
form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flashback. Keep
containers tightly closed. Isolate from heat, sparks, electrical equipment and open flame.
Special Firefighting Procedures: In the event of fire, wear self-contained breathing apparatus. Firefighters should wear full
protective clothing. Combustible. Cool fire-exposed containers using water spray. Cool fire-exposed containers using water
spray.
Section 6 鈥? Accidental Release Measures
Steps To Be Taken If Material Is Released Or Spilled: Evacuate all non-essential personnel. Remove all sources of ignition.
Ventilate area. Contain and remove spilled material with inert absorbent and non-sparking tools. Dike to prevent entering
any sewer or waterway. Use personal protective equipment as necessary.
Section 7 - Handling and Storage
Handling: Do not drill, solder, pressurize, grind, cut, weld, or braze empty container. Do not expose empty container to
static electricity, heat, flame, sparks, or any source of ignition. Use only in ventilated areas. Open doors and windows.
Handle in accordance with good industrial hygiene and safety practice. Keep product and empty container away from heat,
open flames, hot surfaces and sources of ignition.
Storage: Do not store with oxidizers. Store in buildings designed to comply with OSHA 1910.106. Avoid storing near high
temperatures, fire, open flames, and spark sources. Keep containers upright to prevent leakage and tightly closed in a dry,
cool and well-ventilated place.
Section 8 - Exposure Controls / Personal Protection
Component ACGIH TLV ACGIH STEL OSHA PEL OSHA STEL
MINERAL SPIRITS 100 ppm N.E. 500 ppm N.E.
AROMATIC HYDROCARBON 100 ppm N.E. N.E. N.E.
1,2,4 TRIMETHYLBENZENE 25 ppm 150 mg/m3 100 ppm N.E.
ANTI-SKIN AGENT N.E. N.E. N.E. N.E.
PAINT DRIER N.E. N.E. N.E. N.E.
聽
Notes
PAINT DRIER CAS# 22464-99-9 - OSHA 29 CFR 1910.1000, Table Z-1 lists Zirconium Compounds (as Zr). ACGIH TWA/TLV 5 mg/m3; TLV/STEL 10 mg/m3
聽
Engineering Controls: Local ventilation of emission sources may be necessary to maintain ambient concentrations below
permissible OSHA exposure limits. Remove all ignition sources (heat, sparks, flame, and hot surfaces).
Respiratory Protection: A respirator that is recommended or approved for use in an organic vapor environment (air
purifying or fresh air supplied) is necessary. Observe OSHA regulations for respirator use. Ventilation should be provided
to keep exposure levels below the OSHA permissible limits.
Skin Protection: Chemical-resistant gloves (cotton, neoprene, rubber, polyethylene) should be used to prevent skin contact.
Eye Protection: Wear safety eyewear (safety glasses, safety glasses with side-shields, chemical goggles, or face shields) to
prevent eye contact.
Other protective equipment: Long sleeve and long leg clothing is recommended. Remove and wash contaminated clothing
before reuse or discard.
Hygienic Practices: Wash hands before breaks, eating, smoking, and at the end of the workday.
聽Section 9 - Physical and Chemical Properties
Boiling Range (掳F): N.D. - 396 Vapor Density: Heavier than air
Odor: Solvent odor Odor Threshold: N.D.
Appearance: Amber liquid Evaporation Rate: 0.1 x n-Butyl Acetate
Solubility in H2O: Insoluble 聽 聽
Freeze Point: N.D. Specific Gravity: 0.906
Vapor Pressure: N.D. PH: N.A.
Physical State: Liquid Viscosity: Thin liquid to heavy
viscous material
(See section 16 for abbreviation legend)
聽Section 10 - Stability and Reactivity
Conditions To Avoid: Do not breathe vapors or spray mist. Avoid high temperatures, sparks, or open flames.
Incompatibility: Keep away from strong oxidizing agents, heat and open flames.
Hazardous Decomposition: Thermal decomposition can lead to the generation and release of gases and vapors including
carbon monoxide, carbon dioxide, oxides of nitrogen, and hydrocarbons.
Hazardous Polymerization: Will not occur.
Stability: Stable under recommended storage conditions.
MSDS Number: 225 Polyurethane Floor Finish Satin Printing Date: 10/04/2006 Page 3 of 4
聽Section 11 - Toxicological Information
Product LD50: N.E. Product LC50: N.E.
Section 12 - Ecological Information
Ecological Information: No Information.
Section 13 - Disposal Information
Disposal Information: Hazardous Waste Characteristics: Ignitability and Reactivity. EPA Hazardous Waste Number/Code:
D001, F003, F005. Empty containers will contain product residue and flammable vapors. Handle as hazardous material. Do
not incinerate closed containers. Dispose of waste in accordance with federal, state, and local environmental regulations.
Section 14 - Transportation Information
DOT Proper Shipping Name: Consumer Commodity Packing Group: N.A.
DOT Technical Name: N.A. Hazard Subclass: N.A.
DOT Hazard Class: ORM-D Resp. Guide Page: N.A.
DOT UN/NA Number: N.A. 聽 聽
Section 15 - Regulatory Information
聽
CERCLA 鈥? SARA Hazard Category
This product has been reviewed according to the EPA 鈥楬azard Categories鈥? promulgated under Sections 311and 312 of the
Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to
meet the following categories:聽 IMMEDIATE HEALTH HAZARD, CHRONIC HEALTH HAZARD, FIRE HAZARD
聽
SARA Section 313:
This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
Component CAS Number Percent By Weight
1,2,4 TRIMETHYLBENZENE 95-63-6 1.45
PAINT DRIER 22464-99-9 0.21
聽
Toxic Substances Control Act:
This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported
from the United States:
Component CAS Number
SOLVENT - NJTSR # 56705700001-5127P TRADE SECRET
聽
U.S. State Regulations: As follows 鈥?
New Jersey Right-to-Know:
The following materials are non-hazardous, but are among the top five components in this product.
Component CAS Number
ALKYD RESIN TRADE SECRET
PRECIPITATED SILICA 63231-67-4
聽
聽Pennsylvania Right-to-Know:
The following non-hazardous ingredients are present in the product at greater than 3%.
Component CAS Number
ALKYD RESIN TRADE SECRET
聽
California Proposition 65:
Warning: The following ingredients present in the product are known to the state of California to cause Cancer:
Component CAS Number
BENZENE 71-43-2
聽
Warning: The following ingredients present in the product are known to the state of California to cause birth defects, or
other reproductive hazards.
Component CAS Number
TOLUENE 108-88-3
BENZENE 71-43-2
聽
International Regulations: As follows 鈥?
CANADIAN WHMIS:聽 This MSDS has been prepared in compliance with Controlled Product Regulations except for the
use of the 16 headings.
CANADIAN WHMIS CLASS: N.A.
Section 16 - Other Information
聽
HMIS Ratings: 聽 聽 聽
MSDS Number: 225 Polyurethane Floor Finish Satin Printing Date: 10/04/2006 Page 4 of 4
Health: 3 Flammability: 2 Reactivity: 1 Personal Protection: G
聽
VOLATILE ORGANIC COMPOUNDS, GR/LTR: 442.6
VOLATILE ORGANIC COMPOUNDS, LB/GAL: 3.7
VOLATILE ORGANIC COMPOUNDS MIXED, GR/LTR: <= N.D.
VOLATILE ORGANIC COMPOUNDS MIXED, LB/GAL: <= N.D.
REASON FOR REVISION: New Computer System. Information in Sections 2, 3, 4, 5, 6, 7, 8, 14, 15, and 16 have been
updated.
REGULATORY CODE: 225
LAYOUT CODE: A2004R
Legend:聽 N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
The information contained on this MSDS has been checked and should be accurate.聽 However, it is the responsibility of the
user to comply with all Federal, State, and Local laws and regulations.
|