MATERIAL SAFETY DATA SHEET FOR ANTI-DNA KADDZ,1
1 PRODUCT IDENTIFICATION
TRADE NAME: Anti-DNA In-vitro Diagnostic Test Kit PRODUCT CODE: KADDZ,1
th
MANUFACTURER/SUPPLIER: Diagnostic Products Corporation 5700 W. 96 St., Los Angeles CA 90045
Emergency Phone Number: (800) 372-1782 Phone Number: (800) 372-1782 Fax Number: (310) 645-9999
125
PRODUCT COMPONENTS & CATALOG NUMBERS: Anti-DNA I Tracer ADD2; Calibrators ADD3-8;
Ammonium Sulfate Precipitating Solution AMS & 5AMS; Controls ADCO1 & ADCO2
PRODUCT FORMAL NAME: Diagnostic Reagent PRODUCT CHEMICAL NAME: Aqueous Solution
2 HAZARDOUS INGREDIENTS
Kit Component(s): ADD2, ADD3-8, ADCO1 & ADCO2
Hazardous Percent CAS Number EEC Symbol Index #
Component Classification
ADD2:
Cycloheximide (C15H23NO4) <0.1% w/w 66-81-9 -- -- --
<2.5 碌Ci
125
I (50 test kit) 14158-31-7 -- -- --
<5 碌Ci
125
I (100 test kit) 14158-31-7 -- -- --
Nalidixic Acid (C12H12N2O3) <0.1% w/w 389-08-2 -- -- --
Sodium Azide (NaN3) <0.1%w/w 26628-22-8 -- -- --
ADD3-8, ADCO1 & ADCO2:
Cycloheximide (C15H23NO4)) <0.1% w/w 66-81-9 -- -- --
Human Serum -- -- -- -- --
Nalidixic Acid (C12H12N2O3) <0.1% w/w 389-08-2 -- -- --
Sodium Azide (NaN3) <0.1%w/w 26628-22-8 -- -- --
3 HAZARD IDENTIFICATION
Cycloheximide is a suspected cancer hazard. Irritating to skin, eyes, mucous membranes and may be fatal if swallowed.
Human Serum (or its components) used in the manufacture of components was found non-reactive for HIV-1 antibody, non-reactive for HbsAg, and non-
reactive for HCV when tested with licensed reagents. However, no known test method can offer absolute assurance that products derived from human
serum will not be infectious. Handle as if capable of transmitting disease.
Iodine125 is a radioactive tracer element. 60.2 day radioactive half-life . Emits gamma rays.
Nalidixic Acid is a suspected cancer hazard. May be harmful if swallowed, inhaled or absorbed through skin. May cause eye and skin irritation, central
nervous system depression or reproductive damage.
Sodium Azide is a toxic substance. Avoid contact with components, which contain sodium azide, and do not ingest. An accumulation of sodium azide
may result in a reaction with lead or copper plumbing to form an explosive metal azide complex. If drain disposed, dilute and flush with a copious amount
of running water to prevent azide build-up. Dangerous when in contact with acid.
4 FIRST AID MEASURES
EYE CONTACT: Flush with copious amounts of fresh water for at least 15 minutes.
SKIN CONTACT: Wash well with mild soap and copious amounts of fresh water. Remove any contaminated clothing. Flush skin surface with
additional water.
INGESTION: Flush mouth with copious amounts of water. Do not swallow rinse water.
INHALATION: Remove victim to fresh air. If breathing is labored, administer oxygen as needed. If victim is not breathing, administer artificial
respiration or CPR.
Radiological Incident: Survey with appropriate radiation detection equipment. Repeat as necessary.
If warranted, seek medical attention. If possible, save sample of material that caused reaction for use in determination of appropriate
treatment.
5 FIRE EXTINGUISHING MEASURES
Use extinguishing media appropriate to surrounding fire. No special equipment or procedures are required.
6 ACCIDENTAL RELEASE MEASURES
Absorb spills of reagents and patient samples with absorbent paper, taking care not to spread the material. Clean spill area with a freshly made 0.5%
sodium hypochlorite (bleach) solution. Discard all materials used to absorb spill and disinfect area into biohazard waste collection for proper disposal.
MSDS KADD-01 Page 1 of 2
QA-206-A
MATERIAL SAFETY DATA SHEET FOR ANTI-DNA KADDZ,1
7 HANDLING AND STORAGE
HANDLING: Do not eat, drink, smoke or apply cosmetics in laboratory areas. Do not pipet patient samples or reagents by mouth. Avoid splashing or
aerosol formation. Use all reagents in accordance with the relevant package insert. Avoid high temperatures and keep from freezing during transport.
STORAGE: Store all reagents as directed in the relevant package insert.
8 EXPOSURE CONTROL/PERSONAL PROTECTION
Wear appropriate personal protective equipment when working with reagents or patient specimens, including lab coats, disposable gloves and eye
protection. Avoid hand/mouth contact. Wash hands as soon as possible after handling reagents or patient specimens.
Control Parameters of Hazardous Ingredients:
Cycloheximide: CAS# 66-81-9, RTECS # MA4375000, LD50/LC50 Draize test, rabbit, skin: 1 pph/24H Moderate, Oral, mouse LD50 = 133 mg/kg Oral,
rat: LD50 = 2 mg/kg
Nalidixic Acid: CAS# 389-08-2, RTECS # QN2885000 LD50/LC50 Oral, mouse: LD50 = 572 mg/kg; Oral, rat: LD50 = 2040 mg/kg
Sodium Azide: CAS # 26628-22-8, RTECS # VY805000, TLV-Ceiling=0.3mg/m, NIOSH (the concentration of sodium azide in this product is well below
the TLV shown above). Threshold limit value 1.0 ppm, TDLo (oral) 710mcg/kg, female 3mg/kg, LDLo (oral) 29mg male, LDLo (oral) 786 mg female.
9 PHYSICAL & CHEMICAL PROPERTIES
Physical State: Liquid Color: Clear Odor: None pH: N/A
Boiling Point: 100oC Melting Point: 0oC Flash Point: N/A Inflammability: N/A
Autoinflammability: N/A Explosiveness: N/A Oxidizing Properties: N/A
Vapor Pressure: N/A Relative Density: N/A Solubility in water: Complete
10 STABILITY & REACTIVITY
The reagents in the kit are stable under the storage conditions described in the package insert. Hazardous decomposition will not occur. There are no
known strong incompatibilities.
11 TOXICOLOGICAL INFORMATION
WARNING: This product contains Cycloheximide, Nalidixic Acid and a radionuclide, chemicals known to the State of California (Proposition 65) to cause
cancer and birth defects or other reproductive harm.
12 ECOLOGICAL INFORMATION
Not applicable
13 DISPOSAL
Dispose in accordance with applicable laws. If drain disposed, dilute and flush with a copious amount of running water to prevent azide build-up (See
Section 3).
14 TRANSPORT INFORMATION
Proper Shipping Name: Radioactive Material, limited quantity, n.o.s.
Hazard Class: Radioactive Material
Identification Number: UN 2910 Radioactive Material
15 REGULATORY INFORMATION
Pursuant to U.S. OSHA regulations and the EEC Directive Number 88/379, the only hazardous ingredients associated with this product are those listed
in Section 2 above.
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide.
The user should determine the suitability of this information for the intended use of the product and adopt appropriate
safety precautions. DPC shall not be held liable for any damage resulting from handling or from contact with the above
product. Contact DPC for further information.
th
Date MSDS first initiated: October 5 1998
Date MSDS Revised: August 9, 2001 Prepared By: J.M. Smoot, Jr.
Sections Revised: 1, 2, 3, 5, 8, 11, 14, 15
MSDS KADD-01 Page 2 of 2
QA-206-A
|