Material Safety Data Sheet
Revision Issued: 8/07/2008 Supercedes: 1/25/2007 First Issued: 1/25/2007
Section I - Chemical Product And Company Identification
Product Name: Desert Brand Master Seal 100 Pigmented
CAS Number: N/A HBCC MSDS No. CD05003
1675 No. Main Street, Orange, California 92867
Telephone No: 714-998-8800 | Chemtrec: 800-424-9300
Section II - Composition/Information On Ingredients
Exposure Limits (TWAs) in Air
Chemical Name CAS Number ACGIH TLV OSHA PEL STEL
Methyl/Butyl Methacrylate 28262-63-7 100 ppm 200 ppm N/E
Ceramic Microspheres 66402-68-4 10 mg/m鲁 15 mg/m鲁 N/E
Heavy Ketone 71808-49-6 N/E N/E N/E
Hydrocarbon Solvents 1330-20-7 100 ppm 100 ppm 150 ppm
p-Chlorobenzotrifluoride 98-56-6 N/E N/E N/E
Section III - Hazard Identification
Summary of Acute Health Hazards N/A
Ingestion: Liquid ingestion may result in vomiting or abdominal pain.
Inhalation: High vapor/aerosol concentrations (greater than approximately 1000
ppm) are irritating to the respiratory tract, may cause headaches, dizziness,
anesthesia, drowsiness, and other central nervous system effects. Negligible hazard
at ambient temperature (-18 to 38掳C; 0 to 100掳F) with normal ventilation
Skin: Prolonged and repeated liquid contact can cause drying of the skin which may
result in skin irritation and dermatitis.
Eyes: May cause irritation of the eye.
Summary of Chronic Health Hazards: N/A
Signs and Symptoms of Exposure: Prolonged or repeated skin contact with this
product tends to remove oils possibly leading to irritation and dermatitis; however,
based on human experience and available toxicological data, this product is judged
to be neither a "corrosive" nor an "irritant" by OSHA criteria.
Effects of Overexposure: High vapor concentration (greater than approximately
1000 ppm) is irritating to the eyes and the respiratory tract, may cause headaches
and dizziness, are anesthetic, and may have other central nervous system effects.
Medical Conditions Generally Aggravated by Exposure: Petroleum
Solvents/Petroleum Hydrocarbons - Skin contact may aggravate an existing
Product Name: Desert Brand Master Seal 100 - Pigmented 1
dermatitis.
Note to Physicians: N/A
Section IV - First Aid Measures
Ingestion: If ingested, DO NOT INDUCE VOMITING. If vomiting occurs
spontaneously, keep head below hips to prevent aspiration of liquid into the lungs.
GET MEDICAL ATTENTION IMMEDIATELY.
Inhalation: Remove victim to fresh air and provide oxygen if breathing is difficult.
Give artificial respiration if not breathing. GET MEDICAL ATTENTION IMMEDIATELY.
Skin: Wash with soap and water. Remove contaminated clothing and shoes; do not
reuse until cleaned. If persistent irritation occurs, GET MEDICAL ATTENTION
IMMEDIATELY.
Eyes: If splashed into eyes, flush with water for 15 minutes while holding eyelids
open or until irritation subsides. If irritation persists, GET MEDICAL ATTENTION
IMMEDIATELY.
Section V - Fire Fighting Measures
Flash Point: 80掳F CC Autoignition Temperature: 980掳F
Lower Explosive Limit: 1.1% Upper Explosive Limit: 7.0%
Unusual Fire and Explosion Hazards: Handle as a combustible material. Vapors
may form and explosive mixture with air between the upper and lower explosive
limits. Vapor could travel toward a source of ignition and flash back.
Extinguishing Media: Use water fog, foam, dry chemical or CO2. Do not use a
direct stream of water. Product will float and can be reignited on surface of water.
Special Firefighting Procedures: Evacuate hazard area of unprotected personnel.
Wear proper protective clothing including a NIOSH approved self-contained breathing
apparatus. Cool fire-exposed containers with a water mist.
Section VI - Accidental Release Measures
[Spills may need to be reported to the National Response Center (800/424-
8802) CERCLA Reportable Quantity (RQ) is 1000 pounds]. Shut off and
eliminate all ignition sources. Keep people away. Recover by pumping (use an
explosion proof or hand pump) or with a suitable absorbent such as sand, sawdust,
or other suitable absorbent to spill area. Minimize breathing of vapors. Minimize skin
contact. Ventilate confined spaces. Open all windows and doors. Keep product out of
sewers and watercourses by diking or impounding. Advise authorities if product has
entered or may enter sewers, watercourses, or extensive land areas.
Section VII - Handling and Storage
CAUTION: Combustible! Keep away from heat, sparks and open flames. Keep
containers tightly closed. Store product away from strong oxidizing agents and in a
cool, dry place with adequate ventilation.
Product Name: Desert Brand Master Seal 100 - Pigmented 2
Other Precautions: Do Not weld, heat or drill on or near container; even nearly
emptied containers can contain explosive vapors.
Section VIII - Exposure Controls/Personal Protection
Respiratory Protection: None required if adequate ventilation. Only MSHA or
NIOSH approved respirators should be used if concentration is above 1000 ppm.
Ventilation: Use only with ventilation sufficient to prevent exceeding recommended
exposure limit or buildup of explosive concentrations of vapor in air. Use explosion-
proof equipment.
Protective Clothing: Use chemical-resistant apron or other impervious clothing, if
needed, to avoid contaminating regular clothing which could result in prolonged or
repeated skin contact.
Eye Protection: Use splash goggles or face shield when eye contact may occur.
Other Protective Clothing or Equipment: Use chemical-resistant gloves, if
needed, to avoid prolonged or repeated skin contact.
Work/Hygienic Practices: Minimize breathing vapor or mist. Avoid prolonged or
repeated contact with skin. Remove contaminated clothing; launder or dry-clean
before reuse. Remove any contaminated shoes and thoroughly clean and dry before
reuse. Wash skin thoroughly after contact, before breaks and meals, and at end of
work period. Product is readily removed from skin by waterless hand cleaners
followed by washing thoroughly with soap and water. Do NOT place food, coffee or
other drinks in the area where dusting or splashing of solutions is possible.
Section IX - Physical and Chemical Properties
Physical State: Liquid pH: N/A
Melting Point/Range: N/A Boiling Point/Range: 364-464潞F
Appearance/Color/Odor: Various colors, sweet aromatic odor
Solubility in Water (g/100g): Insoluble in
Vapor Pressure(mmHg): N/A
water
Specific Gravity(Water=1): 1.26-1.58 Molecular Weight: N/A
% Volatiles by volume: 54.5-
Vapor Density(Air=1): N/A
55.8
How to detect this compound : N/A VOC: <100 g/l or 0.83 lbs./gallon
Section X - Stability and Reactivity
Stability: Stable Hazardous Polymerization: Will not occur
Conditions to Avoid: Avoid heat, sparks, and open flames.
Materials to Avoid: Strong oxidizing agents; concentrated nitric and sulfuric acids.
Hazardous Decomposition Products: Oxides of carbon .
Section XI - Toxicological Information
N/A
Product Name: Desert Brand Master Seal 100 - Pigmented 3
Section XII - Ecological Information
N/A
Section XIII - Disposal Considerations
Use non-leaking containers, seal tightly and label properly. Dispose of in accordance
with applicable local, county, state and federal regulations.
Section XIV - Transport Information
DOT Proper Shipping Name: Paint
DOT Hazard Class/ I.D. No.: 3, UN1263, II
Section XV - Regulatory Information
Reportable Quantity: N/A
NFPA Rating: Health - 2; Flammability - 2; Instability - 0
0=Insignificant 1=Slight 2=Moderate 3=High 4=Extreme
Carcinogenicity Lists: Yes NTP: No IARC Monograph: No OSHA Regulated: Yes
WARNING
This product contains chemicals known to the State of California to cause
cancer
Uniform Fire Code Rating: Class IC Flammable Liquid.
Section 313 Supplier Notification: This product contains the following toxic
chemical(s) subject to the reporting requirements of SARA TITLE III Section 313 of
the Emergency Planning and Community Right-To Know Act of 1986 and of 40 CFR
372:
Chemical Name % By Weight
CAS #
1330-20-7 Xylene 1.0-1.2%
95-63-6 Trimethylbenzene < 0.10%
Section XVI - Other Information
Synonyms/Common Names: N/A
Chemical Family/Type: Paint
Sections Changed Since Last Revision: II, VIII, IX
IMPORTANT! Read this MSDS before use or disposal of this product. Pass along the
information to employees and any other persons who could be exposed to the
product to be sure that they are aware of the information before use or other
exposure. This MSDS has been prepared according to the OSHA Hazard
Communication Standard [29 CFR 1910.1200]. The MSDS information is based on
sources believed to be reliable. However, since data, safety standards, and
government regulations are subject to change and the conditions of handling and
use, or misuse are beyond our control, Hill Brothers Chemical Company makes no
warranty, either expressed or implied, with respect to the completeness or
continuing accuracy of the information contained herein and disclaims all liability for
reliance thereon. Also, additional information may be necessary or helpful for specific
conditions and circumstances of use. It is the user's responsibility to determine the
suitability of this product and to evaluate risks prior to use, and then to exercise
appropriate precautions for protection of employees and others.
Product Name: Desert Brand Master Seal 100 - Pigmented 4
|