Material Safety Data Sheet PRK-99, Part A
Complies with OSHA's Hazard Communication
GOODSON
Standard 29 CFR 1910.1200.
Tools and Supplies for Engine Builders
Airport Industrial Park 鈥? P.O. Box 847 鈥? Winona, MN 55987-0847
Toll-Free 1-800-533-8010 鈥? Local 507-452-1830 鈥? www.goodson.com
Date of Preparation: October 6, 1995
1. IDENTIFICATION
Part No.: PRK-99, Part A
Description: Port Reshaping Kit
2. HAZARDOUS INGREDIENTS
Ingredients CAS # < Wt. % TLV-TWA STEL Ceiling LD50/LC50 SARA 302, 313, 311-312
Epoxy Resin 25068-38-6 45% n/e n/e n/e 11.4g/kg R No; No; 1,2
>20ml/kg skin, sensitizer
Talc 14807-96-6 35% 2mg/m3 n/e n/e n/a No; No
Silica 14808-60-7 25% 0.1mg/m n/e n/e n/a No; No; NR; No
3
Color Pigment Mixture 5% 3.5mg/m3 n/e n/e n/a No; No
Color Pigment Mixture may contain Iron Oxides, Titanium Dioxide, Carbon Black, and other particulates not otherwise regulated in
varying amounts depending on color product.
WHMIS Classification: D2A, D2B NFPA Fire Fighting: Phase 4
HMIS/NFPA Classification: Health 2, Flammability 1, Reactivity 0 Personal Protection Code: E
3. PHYSICAL DATA
Boiling Range: n/a Product wt/gal.: 14.8lbs/US gal.
Volatile by Weight: 0% Evaporation Rate: n/a
Volatile by Volume: 0% Vapor Density: n/a
Density/sp. gravity: 1.78
4. FIRE AND EXPLOSION HAZARD DATA
Flammability Classification - Flash Point: 201掳F (93掳C) (Setaflash) LEL: n/a UEL: n/a
OSHA: Combustible Liquid/Class-IIIB
DOT: Paint, Not regulated
Canadian TDGA: Not regulated
Extinguishing Media: Dry Chemical, Foam, Carbon Dioxide, Water Fog
Special Firefighting Procedures: Evacuate hazard area of unprotected personnel. Use a NIOSH approved self-contained breathing
unit & complete body protection. Cool surrounding containers with water in case of fire exposure.
Unusual Fire Hazards: Vapors are heavier than air and will accumulate. Vapors will form explosive concentrations with air.
Vapors travel long distances & will flashback. Use mechanical ventilation when necessary to keep percent vapor below the "Lower
Explosion Level" (LEL).
5. HEALTH HAZARD DATA
Inhalation: May cause nose & throat irritation.
Contact: May cause eye irritation. May cause skin irritation. May cause allergic skin reaction.
NOTICE: Contains SILICA which can cause cancer. Risk of cancer depends on duration & level of exposure.
Medical conditions prone to aggravation by exposure: If sensitized to amines, epoxies or other chemicals do not use. See a
physician if a medical condition exists.
Primary Routes of Entry: Inhalation, Dermal, Ingestion
漏 1997 Goodson Shop Supplies
EMERGENCY FIRST AID PROCEDURES
When exposed always get medical attention.
Eye Contact: Flush with water for 15 minutes.
Skin Contact: Wash with soap & water. Remove contaminated clothing & clean before reuse.
Inhalation: Remove to fresh air. Provide oxygen if breathing is difficult. Use artificial respiration if not breathing. Get medical
attention.
Ingestion: Do Not induce vomiting! Always get medical attention.
6. STABILITY & REACTIVITY
Stability: This product is stable under normal storage conditions.
Hazardous Polymerization: Will not occur under normal conditions.
Hazardous Decomposition Products: Carbon monoxide, nitrogen oxides, & unidentified organic compounds. Consider all smoke &
fumes from burning material as very hazardous. Welding, cutting, or abrasive grinding can created smoke & fumes. Do not breathe.
Conditions to Avoid: Heat, sparks, and open flames.
Incompatibility: Avoid contact with strong oxidizing agents.
7. SPILL OR LEAK PROCEDURES
Steps to be taken in case of a spill: Eliminate all ignition sources. Handling equipment must be grounded to prevent sparking.
Evacuate the area of unprotected personnel. Wear appropriate personal protection clothing & equipment. Follow safe handling & use
guidelines in Section 7 & 8. Contain & soak up residual with an absorbent (clay or sand). Take up absorbent material & seal tightly
for proper disposal. Dispose of in accordance with local, state and federal regulations. Refer to Section 2 for Sara Title III & CER-
CLA information.
8. SAFE HANDLING AND USE INFORMATION
Respiratory Protection: Use only with ventilation to keep levels below exposure guidelines (Section 2). User should test & monitor
exposure levels to insure all personnel are below guidelines. If not sure or if not able to monitor use
MSHA/NIOSH approved air-purifying respirator.
Ventilation: Use explosion-proof ventilation when required to keep below health exposure guidelines & Lower
Explosion Limit (LEL).
Skin & Eye Protection: Recommend impervious gloves, clothing & safety glasses with side shields or chemical goggles to avoid
skin & eye contact. If material penetrates to skin, change gloves & clothing.
Hygienic Practices: Wash with soap & water before eating, drinking, applying cosmetics, or using toilet facilities. Use of a
hand cleaner is recommended. Launder contaminated clothing before reuse. Leather shoes can absorb &
pass through hazardous materials. Check shoes carefully after soaking before reuse.
9. SPECIAL PRECAUTIONS
Precautions to be taken in handling & storage: Keep away from heat, sparks, open flame, and strong oxidizing agents. Keep
containers closed. Store in cool, dry place with adequate ventilation. If pouring or transferring materials, ground all containers &
tools.
Other precautions: Do not weld, heat, cut or drill on full or empty containers.
10. REGULATORY INFORMATION
New Jersey/Pennsylvania: No materials meet this criteria
California: Warning: This product contains a chemical(s) known to the State of California to cause cancer & birth
defects or other reproductive harm.
MSDS PRK-99 Part A Page 2
|