GOODSON
Material Safety Data Sheet PTM-20BC/20D
GOODSON
Complies with OSHA's Hazard Communication
Standard 29 CFR 1910.1200.
Tools and Supplies for Engine Builders
156 Galewski Drive 鈥? P.O. Box 847 鈥? Winona, MN 55987-0847
Toll-Free 1-800-533-8010 鈥? Local 507-452-1830 鈥? www.goodson.com
DATE OF PREPARATION: January 1, 1996
GOODSON
1. GENERAL INFORMATION
Part No. and Description: PTM-20BC Steel Ballcones Media 20 lbs.
PTM-20D Steel Diagonal Media 20 lbs.
HMIS Hazard Codes Health (0) Flammability (0) Reactivity (0)
GOODSON
NFPA Hazard Codes: Health (0) Flammability (0) Reactivity (0)
Hazard Rating Scale: 4=Severe 3=Serious 2=Moderate 1=Slight 0=Minimal
2. COMPOSITION AND HAZARDOUS INGREDIENTS
Chemical Name CAS # OSHA PEL mg/M3 ACGIH TI.V mg/M3
Iron 1309-37-1 10.0mg/m3 5.0mg/m3
Manganese 7439-96-5 5.0mg.m3 1.0mg/m3
Trace Elements N/A N/A
3. PHYSICAL DATA
Boiling Point (F): Not Applicable Specific Gravity: 7.6 to 7.8
Vapor Pressure: Not Applicable Evaporation Rate: Not Applicable
Solubility in Water: Not Applicable Melting Point: 2800F
Appearance and Odor: Solid odorless Gray Metal Vapor Density: Not Applicable
4. FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): Not Applicable
Flammable Limits: Not Applicable LEL: Not Applicable UEL: Not Applicable
Extinguishing Media: Not Applicable
Special Fire Fighting Procedures: Not Applicable
Unusual Fire and Explosion Hazards: Not Applicable
5. REACTIVITY DATA
Stability: Stable
Conditions to Avoid: May react with acids to release hydrogen.
Incompatibility (Materials to avoid): Acids
Hazardous Decomposition or Byproducts:Fumes and/or gases produced from welding or burning operations.
Hazardous Polymerization: Will not occur
6. HEALTH HAZARD DATA
ROUTE(S) OF ENTRY: Inhalation: ? Skin: ? Ingestion: ?
Exposure occurs primarily from inhalation of fumes.
HEALTH HAZARDS (ACUTE AND CHRONIC) / SIGNS AND SYMPTOMS OF EXPOSURE / MEDICAL CONDITIONS
GENERALLY AGGRAVATED BY EXPOSURE: Plain carbon steel is not generally considered hazardous in the form shipped,
however, if your process involves grinding, melting, cutting or any other process that causes a release of hazardous levels of fumes or
dust see the following:
Iron Oxide: Repeated exposure to iron oxide fumes over a period of years may cause X-ray changes of the lungs, but does
not cause the exposed person to become ill.
Manganese: Inhalation of manganese fume may cause 鈥渕etal fume fever鈥? with symptoms of chills, fever, nausea, cough,
漏 2001 Goodson Shop Supplies
dry throat, weakness, muscle aches, and a sweet or metallic taste in the mouth. Prolonged or repeated exposure
may affect the nervous system, with difficulty in walking and balancing, weakness or cramps in the legs,
hoarseness of the voice, trouble with memory or judgement, unstable emotions or unusual irritability. The
respiratory system may also be affected by a pneumonia like illness with symptoms of coughing, fever, chills,
body aches, chest pain, and other common signs of pneumonia.
Carcinogen: Not Applicable
EMERGENCY AND FIRST AID PROCEDURES:
Eyes: Flush with plenty of water.
Skin: Wash contaminated area with soap and water.
Inhalation: Move of fresh air if fume exposure causes irritation.
Ingestion: Large enough quantities to cause health effects is unlikely.
7. PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be taken if material is released or spilled: Product is solid metal as shipped. No potential for spill or leak.
Waste Disposal Method: Not applicable
Precautions to be taken in handling and storing: Not Applicable
Other Precautions: Not Applicable
8. SPECIAL PROTECTION INFORMATION AND CONTROL MEASURES
Respiratory Protection (Specify type): Use NIOSH approved fume respirator if torch cutting or welding in poorly ventilated area.
VENTILATION
Local Exhaust: To lower TLV or dust or fume, if needed.
Mechanical (General): Not Applicable
Special/Other: Not Applicable
Protective Gloves: Not Applicable
Eye Protection: Required for grinding, welding, etc.
Other Protective Clothing or Equipment: Not Applicable
Work/Hygienic Practices: Not Applicable
9. OTHER INFORMATION
This Material Safety Data Sheet has been prepared to comply with OSHA Communication Standard 29 CFR 1910.1200. The informa-
tion given above is believed to be accurate as was obtained from MSDS information submitted to us by our suppliers pertaining to the
ingredients contained in this product. The information is provided without any representation or warranty, expressed or implied, with
respect to its accuracy or completeness.
MSDS PTM-20BC/PTM-20D Page 2
|