Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

64742-89-8
110-54-3
1330-20-7
67-64-1
100-41-4
112945-52-5
1333-86-4

File Name: bmed_mcgill_ca---4229-liquid.asp
                                                                                    Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada




Material Safety Data Sheet
Revision Date Prepared by Technical Information
November 8, 2007 Patti Rogers 1-800-201-8822 or support@mgchemicals.com
Head Office Emergency
9347 - 193 Street, Surrey, B.C., Canada V4N 4E7 Phone Canutech (613) 996-6666 Collect 24 hrs


For updates please download from www.mgchemicals.com or fax requests to 1-800-708-9888


Section 1: Product Identification
MSDS Code: 4229 Name: Connector Coating
Related Part Numbers: 4229-55ml, 4229-1L, 4229-4L
Use: Liquid Coating substitute for electrical tape. Coats wires, connectors etc.


Section 2: Hazardous Ingredients
Chemical Percentage
CAS# ACGIH OSHA Other LD 50 LC50
Name by weight
64742-89-8 Light Aliphatic 30-60 N/E N/E N/E >5gm/kg N/E
Solvent (Oral 鈥? rat)
Naphtha


110-54-3 N-Hexane 10-30 STEL 1000 ppm TWA 1800 mg/m3 N/E 25 gm/Kg Oral 169 gm/m3
TWA 50 ppm TWA 500 ppm Rat Inhalation
TWA 500 ppm rat
(skin)
1330-20-7 Xylene 10-30 TWA 100 ppm TWA 435 mg/m3 N/E 4300 mg/m3 21.6 gm/m3
STEL 150 ppm TWA 100 ppm Oral- rat inhalation
rat
67-64-1 Acetone 5-10 TWA 500 ppm TWA 1000 ppm N/E 5800 mg/m3 50.1 gm/m3
STEL 75- ppm TWA 2400mg/m3 oral rat Inhalation
rat
100-41-4 Ethyl Benzene 1-5 TWA 100 ppm TWA 100 ppm N/E 3500 mg/m3 N/E
STEL 125 ppm TWA 435 mg/m3 Oral rat

112945-52-5 Silica, 1-5 TWA 6 mg/m3 TWA 10 mg/m3 3 mg/m3 3160 mg/kg N/E
amorphous, TWA oral rat
fumed, respired
crystalline dust
free
1333-86-4 Carbon Black 0.1-1 TWA 3,5 mg/m3 TWA 3.5 mg/m3 N/E 15400 mg/kg N/E
Oral- Rat




Section 3: Hazards Identification
WHMIS Codes: B2, D2B, D2B
NFPA Ratings: Health 2 Flammability 3 Reactivity 1
HMIS Ratings: Health 2 Flammability 3 Reactivity 1
Eyes: Vapors may irritate eyes. Contact with eyes will cause irritation.

Skin: Contact may dry the skin; prolonged contact may cause moderate irritation.

Inhalation: May be harmful if inhaled. Vapors may cause headaches, nausea, dizziness and respiratory tract irritation.
Reports have associated repeated and prolonged overexposure to solvents with permanent brain and nervous




PAGE 1 / 4 MSDS Code: 4229
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada


system damage. Prolonged exposure to solvents may cause adverse effects to the liver, urinary, and
reproductive systems.
Ingestion: May be harmful if swallowed.

Chronic: No effects known.



Section 4: First Aid Measure
Eyes: Immediately flush eyes with copious amounts of water or saline. Get medical attention if symptoms persist.

Skin: Remove contaminated clothing and shoes. Flush with copious amounts of water (using soap if available). Wash
clothing before reuse. Get medical attention if symptoms develop and persist.
Inhalation: Remove to fresh air. Get medical attention if symptoms develop and persist.

Ingestion: Do not induce vomiting. Keep individual calm. Never give anything by mouth to an unconscious person. Get
medical attention if symptoms develop and persist.




Section 5: Fire Fighting Measures
Autoignition
Not applicable Flash Point: - 23掳C (-10掳F) LEL / UEL: 1.0/ 12.8%
Temperature:
Extinguishing Media: Foam, dry chemical or carbon dioxide.
General Information: Do not store or use near heat, spark, flame, or other sources of ignition.



Section 6: Accidental Release Measures
Spill No environmental precautions known. Remove all ignition sources, Ensure adequate ventilation. Soak up with
Procedure: inert absorbent. Prevent product from entering drains. Store in closed container until ready for disposal.



Section 7: Handling and Storage
Handling: Avoid contact with skin and eyes. Do no breathe mist or vapors. Keep away from heat, spark and flame.
Storage: For safe storage, store below 48掳C (120 F). Keep in a cool, well-ventilated area. Keep away from heat, sparks, and
flame.



Section 8: Exposure Controls
Routes of Oral, Inhalation, Topical.
entry:
Ventilation: Use local ventilation if general ventilation is insufficient to maintain vapor concentration below established
exposure limits. Use NIOSH approved respirator if there is potential to exceed exposure limits.
Personal
Chemical resistant, impermeable, gloves. Safety goggles or glasses with side shields.
Protection:



Section 9: Physical and Chemical Properties
Physical Liquid Odor: Solvent Soluble: Insoluble Evaporation > 1 (Butyl acetate=1)
State: in water Rate:
Boiling 56-141掳C Specific 0.83 Vapor 185 mm Vapor >1 pH: N/a
Point: Gravity: Pressure: Hg @ 20 Density:
掳C




PAGE 2 / 4 MSDS Code: 4229
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada


Section 10: Stability and Reactivity
Stability: Stable at normal temperatures and pressures.

Conditions to
Storage with incompatible materials. Heat, flames, fumes, sparks, and other sources of ignition.
avoid:

Incompatibilities: Strong acids and strong bases. Oxidizing agents. Amines. Alkali metals. Halogenated compounds.

Polymerization: Will not occur.

Decomposition: None



Section 11: Toxicological Information
Sensitization: (effects of repeated
Prolonged or repeated skin contact may cause dermatitis.
exposure)

Carcinogenicity: (risk of cancer) Please refer to Section 15.

Teratogenicity: (risk of malformation in Please refer to Section 15
an unborn fetus)

Reproductive Toxicity: (risk of sterility) This product contains Xylene, a known reproductive toxin.

Mutangenicity: (risk of heritable genetic
N/E
effects)



Section 12: Ecological Information
General Avoid runoff into storms and sewers, which lead into waterways. Water runoff can cause environmental
Information: damage.

Environmental Impact Data: (percentage by weight)

CFC: 0 HFC: Cl.Solv: 0 VOC: 67 HCFC: 0 ODP: 0



Section 13: Disposal Information
General Dispose of in accordance with Federal, provincial, state and local regulations.
Information:



Section 14: Transportation Information
Ground: (All sizes 1 litre or less)
Consumer Commodity / ORM-D.
Air:
Shipper must be trained and certified. Refer to IATA regulations. Coating solution, UN # 1139, Class 3, Packing Group II,
Max Pkg. 1 litre.
Sea:
Shipper must be trained and certified. Refer to IMDG regulations. Ltd. Quantity, Coating solution, UN#1139, class 3,
Packing group II, Max Pkg. 1 litre.



Section 15: Regulatory Information
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and
the MSDS contains all of the information required by the Controlled Products Regulations.

SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
Ethyl benezene CAS# 100-41-4, n-hexane CAS# 110-54-3, and Xylene CAS# 1330-20-7 is listed under section 313 as toxic
material.




PAGE 3 / 4 MSDS Code: 4229
Registered Quality System ISO 9001
QMI Certificate #004008
Burlington, Ontario, Canada



EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
This product contains Ethyl benzene (>5%) n-hexane (>30%), and Xylene (>30%) which are toxic chemicals subject to the
reporting requirements of section 313 Title III of the SARA of 1986 and 40 CFR part 372.
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
CAA (Clean Air Act, USA)
This product does not contain any class 1-ozone depletors.

This product does not contain any class 2-ozone depletors.

This product does not contain any chemicals listed as hazardous air pollutants.
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product contains a chemical known to the State of California to cause cancer, birth defects or reproductive harm.
Health Canada
Labeling and containers used in this product are listed in compliance with Consumer Chemicals and Container regulations.
Environment Canada
Chemicals in this product are listed on the Domestic Substances List in the Canadian Environmental Protection Act

This product does not contain any ozone depleting substances.
Industry and Science Canada
Labeling, product identity, net quantity declaration, minimum printing type size heights, and packaging of this product is in
compliance with the Consumer Packaging and Labeling Act and Regulations. This product is not slack filled in accordance to
chapter 4 prohibitions.
RoHS (The restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2004).
This product is RoHS compliant.


Section 16: Other Information
Definitions: N/a = not applicable, n/e = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of the user to
verify its validity. The buyer assumes all responsibility of using and handling the product in accordance with
federal, state, and local regulations.




PAGE 4 / 4 MSDS Code: 4229

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
bmed_mcgill_ca---3inoneoil.asp 64742-52-5
bmed_mcgill_ca---3m_scotch-weld_epoxy_potting_compound-adhesive_270_black.asp N/A
bmed_mcgill_ca---3m_super_77_classic_spray_adhesive.asp 110-82-7 107-83-5 115-10-6 75-28-5 74-98-6 96-14-0 75-83-2 79-29-8 110-54-3
bmed_mcgill_ca---4229-liquid.asp 64742-89-8 110-54-3 1330-20-7 67-64-1 100-41-4 112945-52-5 1333-86-4
bmed_mcgill_ca---a9_alum_cutting_fluid.asp 64742-58-1
bmed_mcgill_ca---air-lube-10wnr.asp N/A
bmed_mcgill_ca---alloy_sn-pb_solders-alloys.asp 2005-06-1 7440-31-5 7439-92-1
bmed_mcgill_ca---alvania_grease_rl_2.asp N/A
bmed_mcgill_ca---astro_cut_series_2001_b.asp 64742-52-5 15-20-1
bmed_mcgill_ca---barbasolaloeshavingcream.asp N/A
bmed_mcgill_ca---bernz-o-matic_propane.asp 74-98-6
bmed_mcgill_ca---castrol_stick_wax.asp 8002-74-2 64742-60-5
bmed_mcgill_ca---chemtronics_freez-it.asp 811-97-2
bmed_mcgill_ca---circuitworks_conductive_epoxy_part_a.asp 7440-22-4 025068-38-6 68475-94-5
bmed_mcgill_ca---circuitworks_heat_sink_grease.asp 63148-62-9 1314-13-2 112945-52-5
bmed_mcgill_ca---cool_tool_ii.asp 13-61-4
bmed_mcgill_ca---dow_corning_high_vacuum_grease.asp N/A
bmed_mcgill_ca---epoxy-steel-syringe.asp 140-31-8 112-24-3 90-72-2 1333-86-4
bmed_mcgill_ca---ep_hydraulic_oil_68.asp 64742-54-7 68649-42-3 104-76-7
bmed_mcgill_ca---ethanolmsds.asp N/A
bmed_mcgill_ca---granite_plate_cleaner_2216a51.asp N/A
bmed_mcgill_ca---invoice_flammables_cabinet.asp N/A
bmed_mcgill_ca---ips_weld_on_3.asp 75-09-2 1119-40-0 80-62-6
bmed_mcgill_ca---jbweld_hardener.asp 1317-65-3 7727-43-7 14807-96-6 13463-67-7 1314-98-3 98-00-0 68410-23-1
bmed_mcgill_ca---jbweld_resin.asp 1317-65-3 65997-19-5 25068-38-6 64742-94-5
bmed_mcgill_ca---lepage_contact_cement_cleaner.asp 64742-95-6 9016-45-9
bmed_mcgill_ca---lepage_epoxy_putty.asp 25068-38-6 28064-14-4 32610-77-8 90-72-2
bmed_mcgill_ca---lepage_expoxy_steel.asp 140-31-8 112-24-3 90-72-2 1333-86-4
bmed_mcgill_ca---lepage_polyfilla-cellulose_filler.asp N/A
bmed_mcgill_ca---lepage_poly_instafil.asp N/A
bmed_mcgill_ca---lepage_suregrip_carpenters_glue.asp N/A
bmed_mcgill_ca---loctiter_222ms_threadlocker_low_strength.asp 25852-47-5 9004-96-0 81-07-2 112945-52-5 80-15-9 57-55-6
bmed_mcgill_ca---loctiter_290_threadlocker_wicking_grade.asp 25852-47-5 80-15-9 81-07-2
bmed_mcgill_ca---loctite271.asp 25852-47-5 39382-25-7 81-07-2 80-15-9
bmed_mcgill_ca---loctite609.asp 25852-47-5 868-77-9 68132-02-5 9003-42-3 80-15-9 81-07-2
bmed_mcgill_ca---loctite680.asp 24448-20-2 27813-02-1 39382-25-7 80-15-9 25852-47-5 114-83-0
bmed_mcgill_ca---loctite7471.asp 67-64-1 75-28-5 67-63-0 149-30-4
bmed_mcgill_ca---loctitedegreaser.asp 64742-47-8 5989-27-5
bmed_mcgill_ca---loctite_242_medium_strength_threadlocker_blue_automotive_grade.asp 9004-96-0 81-07-2 112945-52-5 57-55-6 25852-47-5 80-15-9
bmed_mcgill_ca---loctite_401_prism_surface_insensitive_instant_adhesive.asp 7085-85-0
bmed_mcgill_ca---loctite_565_thread_sealant_pst_pipe_sealant_with_ptfe.asp 25852-47-5 68186-73-2 9004-36-8 9002-84-0 13463-67-7 67762-90-7 81-07-2 80-15-9
bmed_mcgill_ca---loctite_620_retaining_compound_slip_fit.asp 24448-20-2 3006-93-7 27813-02-1 80-15-9 112945-52-5 114-83-0
bmed_mcgill_ca---loctite_770_primer_prism.asp 142-82-5
bmed_mcgill_ca---loctite_gasket_eliminatorr_515_flange_sealant.asp 25852-47-5 112945-52-5 79-10-7 80-15-9 81-07-2 114-83-0
bmed_mcgill_ca---loctite_threadlocker_262.asp 25852-47-5 39382-25-7 81-07-2 80-15-9
bmed_mcgill_ca---lubri-delta_acetone.asp 67-64-1
bmed_mcgill_ca---lubriplate.asp 64742-52-5 4485-12-5 68991-19-5 1314-13-2
bmed_mcgill_ca---lucas_oil_red_n_tacky_2.asp N/A
bmed_mcgill_ca---lucas_oil_x-tra_heavy_duty_grease.asp N/A
bmed_mcgill_ca---mastercraft_578016.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC