05302005 MATERIAL SAFETY DATA SHEET : 00000760 PAGE:1
HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO CANADA L6T 2J4
(905) 459-1140
PRODUCT : LEPAGE EPOXY STEEL (HARDENER)
Kit sub-component: LEPAGE EPOXY STEEL (RESIN)
SECTION 01: PRODUCT INFORMATION
MANUFACTURER.....................HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO
CANADA ; L6T 2J4
(905) 459-1140
AFTER HOURS - CANUTEC (613) 996-6666
WHMIS CLASSIFICATION.............D2A. D2B. WHEN THIS PRODUCT IS LABELLED AS A CONSUMER PRODUCT IT IS EXEMPT
FROM WHMIS REGULATIONS. (SEE SECTION 12(f) OF THE HAZARDOUS PRODUCTS ACT).
T.D.G. CLASSIFICATION............WHEN THIS PRODUCT IS LABELLED AS A CONSUMER COMMODITY IT IS EXEMPT FROM
T.D.G. REGULATIONS.
PRODUCT NAME.....................LEPAGE EPOXY STEEL (HARDENER)
CHEMICAL FAMILY..................POLYMERCAPTAN
MATERIAL USE.....................HARDENER FOR EPOXY RESINS
SECTION 02: HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % EXPOSURE LEVELS C.A.S. # LD/50, ROUTE, SPECIES LC/50, ROUTE, SPECIES
Mercaptan terminated polymer 10-30 Not available Proprietary Not available Not available
Aminoethylpiperazine 1-5 Not available 140-31-8 2.14g/kg,oral,rat Not available
880mg/kg,dermal,
rabbit
Triethylenetetramine 1-5 Not available 112-24-3 1.6g/kg,oral,mouse Not available
805mg/kg,dermal,
rabbit
2,4,6-Tridimethylaminomethyl 1-5 NOT AVAILABLE 90-72-2 2500mg/kg, RAT, NOT AVAILABLE
phenol ORAL 1200mg/kg,
RBT, DERMAL
Carbon black 1-5 3.5mg/m3 1333-86-4 Not available 27g/m3/1hr.
inhl.,rat
SECTION 03: PHYSICAL DATA
PHYSICAL STATE...................Liquid
APPEARANCE & ODOUR...............Black paste. Viscous liquid. Unpleasant odour
ODOUR THRESHOLD (ppm)............Not available
VAPOUR PRESSURE (mm Hg)..........< 5 at 25 deg C
VAPOUR DENSITY (AIR=1)...........Not available
BY VOLUME
BY WEIGHT
EVAPORATION RATE.................Not available
BOILING POINT (deg C)............> 150 deg C
pH...............................Not applicable
SPECIFIC GRAVITY.................1.80
SOLUBILITY IN WATER (% W/W)......Slightly Soluble
COEFFICIENT OF WATER/OIL.........Not available
DISTRIBUTION
SECTION 04: FIRE & EXPLOSION DATA
FLAMMABILITY
IF YES, UNDER WHICH..............Not applicable
CONDITIONS?
AUTO IGNITION TEMPERATURE........Not available
EXTINGUISHING MEDIA..............Foam, "Alcohol" Foam, CO2, Dry Chemical, Water Fog.
SPECIAL PROCEDURES...............Firefighters should wear the usual protective gear; self-contained
breathing apparatus.
FLASH POINT (C), METHOD..........> 93 deg C, TCC
LOWER FLAMMABLE LIMIT (% VOL)....Not available
UPPER FLAMMABLE LIMIT (% VOL)....Not available
HAZARDOUS COMBUSTION PRODUCTS....Oxides of carbon (CO,CO2). Oxides of nitrogen. Ammonia. Amines.
Hydrocarbons
SECTION 05: REACTIVITY DATA
CHEMICAL STABILITY:
YES........................Under normal conditions
NO, WHICH CONDITIONS ?
COMPATIBILITY WITH OTHER
SUBSTANCES:
05302005 MATERIAL SAFETY DATA SHEET : 00000760 PAGE:2
PRODUCT : LEPAGE EPOXY STEEL (HARDENER)
SECTION 05: REACTIVITY DATA
YES
NO, WHICH ONES?............Strong oxidizing agents. Strong acids. Strong bases. Metals. Mineral
acids. Chlorinated materials. Peroxides or other polymerization
initiators. Epoxies
REACTIVITY CONDITIONS ?..........None
HAZARDOUS PRODUCTS OF............None
DECOMPOSITION
SECTION 06: TOXICOLOGICAL PROPERTIES
SKIN CONTACT...............May be a sensitizer. Can cause severe irritation.
SKIN ABSORPTION............No data
EYE CONTACT................Expected to cause irritation. Causes tissue damage and may cause permanent
impairment of vision if not flushed immediately from eyes.
INHALATION.................May cause allergic reaction. Inhalation of mist or vapour may cause
irritation of the respiratory tract. May cause delayed lung damage.
INGESTION..................May cause irritation of the gastrointestinal tract.
EFFECTS OF ACUTE EXPOSURE........Skin, eye, and respiratory tract irritation.
EFFECTS OF CHRONIC EXPOSURE......Allergic reaction. May aggravate existing eye, skin, and lung conditions.
LD 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2)
ROUTE
LC 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2).
ROUTE
EXPOSURE LIMIT OF MATERIAL.......Not available
IRRITANCY OF MATERIAL............Refer to route of entry
SENSITIZING CAPABILITY OF........May cause allergic skin reaction, especially on prolonged or repeated
MATERIAL contact.
CARCINOGENICITY OF MATERIAL......Carbon black is an IARC-listed probable lung carcinogen.
MUTAGENICITY OF MATERIAL.........Not indicated
REPRODUCTIVE EFFECTS.............Not indicated
TERATOGENICITY OF MATERIAL.......Not indicated
SYNERGISTIC MATERIALS............Not available
SECTION 07: PREVENTATIVE MEASURES
GLOVES/ TYPE...............Wear impervious gloves (in neoprene or rubber).
RESPIRATORY/TYPE...........None required under normal use. Use a NIOSH/MSHA approved respirator
whenever mist or spray is generated.
EYE/TYPE...................Safety glasses with side-shields
FOOTWEAR/TYPE..............Standard work shoes.
CLOTHING/TYPE..............Standard work clothes.
VENTILATION REQUIREMENTS.........Use adequate local exhaust ventilation.
LEAK/SPILL.......................Clean up spills immediately. Absorb residual material with sand, or other
absorbent material.
WASTE DISPOSAL...................In accordance with municipal, provincial and federal regulations.
HANDLING PROCEDURES AND..........Use adequate ventilation. Wear chemical splash goggles, gloves, and
EQUIPMENT protective clothing. Avoid skin and eye contact. Wash thoroughly after
handling.
STORAGE NEEDS....................Store in a cool, dry place away from direct heat.
SPECIAL SHIPPING INSTRUCTIONS....Protect against physical damage.
SECTION 08: FIRST AID MEASURES
EYE CONTACT......................Immediately flush with water for a minimum of 15 minutes holding lids
apart to ensure flushing of entire surface. Washing within 1 minute is
essential to achieve maximum effectiveness.
INGESTION........................Do not induce vomiting. If vomiting should occur spontaneously, keep
airway clear. Get medical attention. Never give anything by mouth to an
unconscious person.
INHALATION.......................Remove to fresh air. If symptoms develop, seek medical attention.
SKIN CONTACT.....................Remove contaminated clothing. Wash affected area with water and soap. Seek
medical attention if irritation occurs or persists.
SECTION 09: PREPARATION INFORMATION
PREPARED BY:.....................Regulatory Affairs
TELEPHONE NUMBER:................(905) 459-1140
DISCLAIMER2:.....................All information, recommendations, and suggestions appearing herein
concerning our product are based upon tests and data believed to be
reliable. However, it is the user's responsibility to determine the
safety, toxicity, and suitability for his own use of the product described
herein. Since the actual use by others is beyond our control, no
guarantee, express or implied, is made by Henkel Consumer Adhesives as to
the effects of such use, the results obtained, or the safety and toxicity
of the product nor does Henkel Consumer Adhesives assume any liability
arising out of use, by others, of the product referred to herein. The
information herein is not to be construed as absolutely complete since
additional information may be necessary or desirable when particular or
exceptional conditions or circumstan ces exist or because of applicable
laws or government regulations.
PREPARATION DATE.................MAY 30/2005
05302005 MATERIAL SAFETY DATA SHEET : 00000760 PAGE:3
PRODUCT : LEPAGE EPOXY STEEL (HARDENER)
SECTION 09: PREPARATION INFORMATION
CANUTEC EMERGENCY (613) 996-6666
05302005 MATERIAL SAFETY DATA SHEET : 00000761 PAGE:1
HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO CANADA L6T 2J4
(905) 459-1140
PRODUCT : LEPAGE EPOXY STEEL (RESIN)
Kit sub-component: LEPAGE EPOXY STEEL (HARDENER)
SECTION 01: PRODUCT INFORMATION
MANUFACTURER.....................HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO
CANADA ; L6T 2J4 ; L6T 2J4
(905) 459-1140
AFTER HOURS - CANUTEC (613) 996-6666
WHMIS CLASSIFICATION.............D2B. WHEN THIS PRODUCT IS LABELLED AS A CONSUMER PRODUCT IT IS EXEMPT FROM
WHMIS REGULATIONS. (SEE SECTION 12(f) OF THE HAZARDOUS PRODUCTS ACT).
T.D.G. CLASSIFICATION............NOT REGULATED
PRODUCT NAME.....................LEPAGE EPOXY STEEL (RESIN)
CHEMICAL FAMILY..................EPOXY RESIN
MATERIAL USE.....................ADHESIVE FOR GLASS, METAL AND CONCRETE
SECTION 02: HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % EXPOSURE LEVELS C.A.S. # LD/50, ROUTE, SPECIES LC/50, ROUTE, SPECIES
Epoxy Resin 30-60 Not available Proprietary Not available Not available
SECTION 03: PHYSICAL DATA
PHYSICAL STATE...................Liquid
APPEARANCE & ODOUR...............Translucent. Mild odour
ODOUR THRESHOLD (ppm)............Not available
VAPOUR PRESSURE (mm Hg)..........Not available
VAPOUR DENSITY (AIR=1)...........Not available
BY VOLUME
BY WEIGHT
EVAPORATION RATE.................Not available
BOILING POINT (deg C)............> 260 deg C
pH...............................Not available
SPECIFIC GRAVITY.................1.80
SOLUBILITY IN WATER (% W/W)......Slight
COEFFICIENT OF WATER/OIL.........Not available
DISTRIBUTION
SECTION 04: FIRE & EXPLOSION DATA
FLAMMABILITY.....................Non combustible
IF YES, UNDER WHICH
CONDITIONS?
AUTO IGNITION TEMPERATURE........Not available
EXTINGUISHING MEDIA..............Water fog; Foam; CO2; Dry chemical
SPECIAL PROCEDURES...............Fire fighters should be equipped with self-contained breathing apparatus
to protect against potentially toxic and irritating fumes.
FLASH POINT (C), METHOD..........> 250 deg C, PMCC
LOWER FLAMMABLE LIMIT (% VOL)....Not available
UPPER FLAMMABLE LIMIT (% VOL)....Not available
HAZARDOUS COMBUSTION PRODUCTS....Oxides of carbon (CO,CO2)
SECTION 05: REACTIVITY DATA
CHEMICAL STABILITY:
YES........................Under normal conditions
NO, WHICH CONDITIONS ?
COMPATIBILITY WITH OTHER
SUBSTANCES:
YES
NO, WHICH ONES?............Oxidizing agents. Acids and bases. Amines. Mercaptans
REACTIVITY CONDITIONS ?..........Water reactive
HAZARDOUS PRODUCTS OF............None
DECOMPOSITION
SECTION 06: TOXICOLOGICAL PROPERTIES
SKIN CONTACT...............May be a sensitizer. May cause irritation, especially on prolonged contact.
SKIN ABSORPTION............No data
EYE CONTACT................Expected to cause irritation. Causes tissue damage and may cause permanent
impairment of vision if not flushed immediately from eyes.
05302005 MATERIAL SAFETY DATA SHEET : 00000761 PAGE:2
PRODUCT : LEPAGE EPOXY STEEL (RESIN)
SECTION 06: TOXICOLOGICAL PROPERTIES
INHALATION.................Inhalation of mist or vapour may cause irritation of the respiratory tract.
INGESTION..................No hazard in normal use.
EFFECTS OF ACUTE EXPOSURE........Skin, eye, and respiratory tract irritation. Possible gastrointestinal
tract irritation.
EFFECTS OF CHRONIC EXPOSURE......Allergic reaction. May aggravate existing eye, skin, and lung conditions.
LD 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2)
ROUTE
LC 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2).
ROUTE
EXPOSURE LIMIT OF MATERIAL.......Not available
IRRITANCY OF MATERIAL............Refer to route of entry
SENSITIZING CAPABILITY OF........May cause allergic skin reaction, especially on prolonged or repeated
MATERIAL contact.
CARCINOGENICITY OF MATERIAL......Not indicated
MUTAGENICITY OF MATERIAL.........Not indicated
REPRODUCTIVE EFFECTS.............Not indicated
TERATOGENICITY OF MATERIAL.......Not available
SYNERGISTIC MATERIALS............Not available
SECTION 07: PREVENTATIVE MEASURES
GLOVES/ TYPE...............Wear impervious gloves (in neoprene or rubber).
RESPIRATORY/TYPE...........None required under normal use. Use a NIOSH/MSHA approved respirator
whenever mist or spray is generated.
EYE/TYPE...................Safety glasses with side-shields
FOOTWEAR/TYPE..............Standard work shoes.
CLOTHING/TYPE..............Standard work clothes.
VENTILATION REQUIREMENTS.........Use adequate local exhaust ventilation.
LEAK/SPILL.......................Clean up spills immediately. Absorb residual material with sand, or other
absorbent material.
WASTE DISPOSAL...................In accordance with municipal, provincial and federal regulations.
HANDLING PROCEDURES AND..........Use adequate ventilation. Wear chemical splash goggles, gloves, and
EQUIPMENT protective clothing. Avoid skin and eye contact. Wash thoroughly after
handling.
STORAGE NEEDS....................Store in a cool, dry place away from direct heat.
SPECIAL SHIPPING INSTRUCTIONS....Protect against physical damage.
SECTION 08: FIRST AID MEASURES
EYE CONTACT......................Immediately flush with water for a minimum of 15 minutes holding lids
apart to ensure flushing of entire surface. Washing within 1 minute is
essential to achieve maximum effectiveness.
INGESTION........................Do not induce vomiting. If vomiting should occur spontaneously, keep
airway clear. Get medical attention. Never give anything by mouth to an
unconscious person.
INHALATION.......................Remove to fresh air. If symptoms develop, seek medical attention.
SKIN CONTACT.....................Remove contaminated clothing. Wash affected area with water and soap. Seek
medical attention if irritation occurs or persists.
SECTION 09: PREPARATION INFORMATION
PREPARED BY:.....................Regulatory Affairs
TELEPHONE NUMBER:................(905) 459-1140
DISCLAIMER2:.....................All information, recommendations, and suggestions appearing herein
concerning our product are based upon tests and data believed to be
reliable. However, it is the user's responsibility to determine the
safety, toxicity, and suitability for his own use of the product described
herein. Since the actual use by others is beyond our control, no
guarantee, express or implied, is made by Henkel Consumer Adhesives as to
the effects of such use, the results obtained, or the safety and toxicity
of the product nor does Henkel Consumer Adhesives assume any liability
arising out of use, by others, of the product referred to herein. The
information herein is not to be construed as absolutely complete since
additional information may be necessary or desirable when particular or
exceptional conditions or circumstan ces exist or because of applicable
laws or government regulations.
PREPARATION DATE.................MAY 30/2005
CANUTEC EMERGENCY (613) 996-6666
|