02212008 MATERIAL SAFETY DATA SHEET : 00000749 PAGE:1
HENKEL CORPORATION
6685 KENNEDY ROAD, SUITE #1
MISSISSAUGA, ONTARIO CANADA L5T 3A5
(905) 696-2770
PRODUCT : LEPAGE EPOXY PUTTY
SECTION 01: PRODUCT INFORMATION
MANUFACTURER.....................HENKEL CORPORATION
6685 KENNEDY ROAD, SUITE #1
MISSISSAUGA, ONTARIO
CANADA ; L5T 3A5
(905) 696-2770
AFTER HOURS - CANUTEC (613) 996-6666
WHMIS CLASSIFICATION.............D2B. WHEN THIS PRODUCT IS LABELLED AS A CONSUMER PRODUCT IT IS EXEMPT FROM
WHMIS REGULATIONS. (SEE SECTION 12(f) OF THE HAZARDOUS PRODUCTS ACT).
T.D.G. CLASSIFICATION............NOT REGULATED
PRODUCT NAME.....................LEPAGE EPOXY PUTTY
CHEMICAL FAMILY..................EPOXY ADHESIVES.
MATERIAL USE.....................ADHESIVE FOR GLASS, METAL AND CONCRETE
SECTION 02: HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % EXPOSURE LEVELS C.A.S. # LD/50, ROUTE, SPECIES LC/50, ROUTE, SPECIES
Bisphenol A, polymer with 5-10 Not available 25068-38-6 Not available Not available
chloromethyloxirane
Phenol, polymer with 1-5 Not available 28064-14-4 Not available Not available
formaldehyde, glycidyl ether
Formaldehyde polymer with 1-5 Not available 32610-77-8 Not available Not available
phenol and triethylene
tetramine
Phenol,2,4,6-tri(dimethylamin 0.1-1.0 TLV-Skin: 5ppm 90-72-2 1.2g/kg,skin,rabbit Not available
omethyl)
SECTION 03: PHYSICAL DATA
PHYSICAL STATE...................Solid
APPEARANCE & ODOUR...............Green. Grey. Amine odour
ODOUR THRESHOLD (ppm)............Not available
VAPOUR PRESSURE (mm Hg)..........Not applicable
VAPOUR DENSITY (AIR=1)...........Not applicable
BY VOLUME
BY WEIGHT
EVAPORATION RATE.................Not applicable
BOILING POINT (deg C)............Not applicable
pH...............................Not applicable
SPECIFIC GRAVITY.................1.9
SOLUBILITY IN WATER (% W/W)......Insoluble
COEFFICIENT OF WATER/OIL.........Not available
DISTRIBUTION
SECTION 04: FIRE & EXPLOSION DATA
FLAMMABILITY.....................None
IF YES, UNDER WHICH..............Not applicable
CONDITIONS?
AUTO IGNITION TEMPERATURE........Not available
EXTINGUISHING MEDIA..............Foam, dry chemical, carbon dioxide, or water spray
SPECIAL PROCEDURES...............Fire fighters should be equipped with self-contained breathing apparatus
to protect against potentially toxic and irritating fumes.
FLASH POINT (C), METHOD..........Not available
LOWER FLAMMABLE LIMIT (% VOL)....Not available
UPPER FLAMMABLE LIMIT (% VOL)....Not available
HAZARDOUS COMBUSTION PRODUCTS....Oxides of carbon (CO,CO2). Oxides of nitrogen. Oxides of sulphur. Aldehydes
SECTION 05: REACTIVITY DATA
CHEMICAL STABILITY:
YES........................Stable under normal temperature and pressure.
NO, WHICH CONDITIONS ?
COMPATIBILITY WITH OTHER
SUBSTANCES:
YES
NO, WHICH ONES?
REACTIVITY CONDITIONS ?
HAZARDOUS PRODUCTS OF............Aldehydes and acids. Oxides of carbon (CO,CO2). Oxides of sulphur. Oxides
DECOMPOSITION of nitrogen
02212008 MATERIAL SAFETY DATA SHEET : 00000749 PAGE:2
PRODUCT : LEPAGE EPOXY PUTTY
SECTION 06: TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY:
SKIN CONTACT...............Repeated or prolonged skin contact may cause skin irritation including
redness, itching, and in severe cases, blisters. May be a sensitizer.
SKIN ABSORPTION............No data
EYE CONTACT................Slightly irritating but does not cause eye tissue damage.
INHALATION.................Not considered a hazard under normal conditions of use.
INGESTION..................May cause gastrointestinal irritation, abdominal pain, nausea and vomiting.
EFFECTS OF ACUTE EXPOSURE........Possible skin, eye, and respiratory tract irritation.
EFFECTS OF CHRONIC EXPOSURE......May aggravate existing eye, skin, and lung conditions. Skin sensitizer
LD 50 OF MATERIAL, SPECIES &.....> 5 g/kg, rat, oral. > 2 g/kg, rabbit, dermal
ROUTE
LC 50 OF MATERIAL, SPECIES &.....Not available
ROUTE
EXPOSURE LIMIT OF MATERIAL.......Not available
IRRITANCY OF MATERIAL............Not available
SENSITIZING CAPABILITY OF........May cause allergic skin reaction, especially on prolonged or repeated
MATERIAL contact.
CARCINOGENICITY OF MATERIAL......Not indicated
MUTAGENICITY OF MATERIAL.........None known
REPRODUCTIVE EFFECTS.............None known
TERATOGENICITY OF MATERIAL.......None known
SYNERGISTIC MATERIALS............Not available
SECTION 07: PREVENTATIVE MEASURES
GLOVES/ TYPE...............Wear impervious gloves (in neoprene or rubber).
RESPIRATORY/TYPE...........None required under normal use. Use approved respirator for dusts and
mists when sanding, grinding or machining cured compound.
EYE/TYPE...................Safety glasses with side-shields
FOOTWEAR/TYPE..............Standard work shoes.
CLOTHING/TYPE..............Standard work clothes.
VENTILATION REQUIREMENTS.........Use adequate general ventilation.
LEAK/SPILL.......................Put in appropriate labelled container for disposal. Wash spill area with
soap and water.
WASTE DISPOSAL...................In accordance with municipal, provincial and federal regulations.
HANDLING PROCEDURES AND..........Use adequate ventilation. Avoid skin and eye contact.
EQUIPMENT
STORAGE NEEDS....................KEEP AWAY FROM CHILDREN. Avoid extreme temperatures. Store in a well
ventilated area. Store in a cool dry place.
SPECIAL SHIPPING INSTRUCTIONS....Not regulated
SECTION 08: FIRST AID MEASURES
EYE CONTACT......................Immediately flush with water for a minimum of 15 minutes holding lids
apart to ensure flushing of entire surface. Washing within 1 minute is
essential to achieve maximum effectiveness. Obtain immediate medical
attention.
INGESTION........................Call a physician or Poison Control Centre immediately. DO NOT attempt to
give anything by mouth to a drowsy or unconscious person.
INHALATION.......................Remove to fresh air. If symptoms develop, seek medical attention.
SKIN CONTACT.....................Remove contaminated clothing. Wash affected area with water and soap. Seek
medical attention if irritation occurs or persists.
SECTION 09: PREPARATION INFORMATION
PREPARED BY:.....................Regulatory Affairs
TELEPHONE NUMBER:................(440) 937-7000
DISCLAIMER2:.....................All information, recommendations, and suggestions appearing herein
concerning our product are based upon tests and data believed to be
reliable. However, it is the user's responsibility to determine the
safety, toxicity, and suitability for his own use of the product described
herein. Since the actual use by others is beyond our control, no
guarantee, express or implied, is made by Henkel Corporation as to
the effects of such use, the results obtained, or the safety and toxicity
of the product nor does Henkel Corporation assume any liability
arising out of use, by others, of the product referred to herein. The
information herein is not to be construed as absolutely complete since
additional information may be necessary or desirable when particular or
exceptional conditions or circumstan ces exist or because of applicable
laws or government regulations.
PREPARATION DATE.................FEB 21/2008
CANUTEC EMERGENCY (613) 996-6666
|