02272008 MATERIAL SAFETY DATA SHEET : 00000133 PAGE:1
HENKEL CORPORATION
6685 KENNEDY ROAD, SUITE #1
MISSISSAUGA, ONTARIO CANADA L5T 3A5
(905) 696-2770
PRODUCT : POLY INSTAFIL
SECTION 01: PRODUCT INFORMATION
MANUFACTURER.....................HENKEL CORPORATION
6685 KENNEDY ROAD, SUITE #1
MISSISSAUGA, ONTARIO
CANADA ; L5T 3A5
(905) 696-2770
AFTER HOURS - CANUTEC (613) 996-6666
WHMIS CLASSIFICATION.............NONE
T.D.G. CLASSIFICATION............NOT REGULATED
PRODUCT NAME.....................POLY INSTAFIL
CHEMICAL FAMILY..................ACRYLIC EMULSION POLYMER BLEND
MATERIAL USE.....................WALL PATCHING COMPOUND
SECTION 02: HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % EXPOSURE LEVELS C.A.S. # LD/50, ROUTE, SPECIES LC/50, ROUTE, SPECIES
Considered non-hazardous as Not available
per WHMIS regulations.
SECTION 03: PHYSICAL DATA
PHYSICAL STATE...................Paste
APPEARANCE & ODOUR...............White. Smooth paste
ODOUR THRESHOLD (ppm)............Not applicable
VAPOUR PRESSURE (mm Hg)..........Not applicable
VAPOUR DENSITY (AIR=1)...........Not applicable
BY VOLUME
BY WEIGHT
EVAPORATION RATE.................1 (water)
BOILING POINT (deg C)............100 deg C
FREEZING POINT (deg C)...........< 5 deg C
pH...............................8.4-9.0
SPECIFIC GRAVITY.................0.4-0.6
SOLUBILITY IN WATER (% W/W)......Miscible
COEFFICIENT OF WATER/OIL.........Not available
DISTRIBUTION
SECTION 04: FIRE & EXPLOSION DATA
FLAMMABILITY.....................No. This is a water-based product and presents no particular fire or
explosion hazard.
IF YES, UNDER WHICH..............Not applicable
CONDITIONS?
EXTINGUISHING MEDIA..............Water fog. Foam. Dry chemical
SPECIAL PROCEDURES...............Fire fighters should be equipped with self-contained breathing apparatus
to protect against potentially toxic and irritating fumes.
FLASH POINT (C), METHOD..........Not applicable
AUTO IGNITION TEMPERATURE........Not available
UPPER FLAMMABLE LIMIT (% VOL)....Not applicable
LOWER FLAMMABLE LIMIT (% VOL)....Not applicable
HAZARDOUS COMBUSTION PRODUCTS....Thermal decomposition could produce carbon monoxide, carbon dioxide, and
unidentified organic compounds.
EXPLOSION DATA
SENSITIVITY TO STATIC............No
DISCHARGE
SENSITIVITY TO IMPACT......No
SECTION 05: REACTIVITY DATA
CHEMICAL STABILITY:
YES........................Stable under normal temperature and pressure.
NO, WHICH CONDITIONS ?
COMPATIBILITY WITH OTHER
SUBSTANCES:
YES
NO, WHICH ONES?............Materials that react with water. Strong oxidizing agents
REACTIVITY CONDITIONS ?..........Product is stable; hazardous polymerization will not occur.
HAZARDOUS PRODUCTS OF............No hazardous decomposition products known.
DECOMPOSITION
02272008 MATERIAL SAFETY DATA SHEET : 00000133 PAGE:2
PRODUCT : POLY INSTAFIL
SECTION 06: TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY:
SKIN CONTACT...............Expected to be irritating especially on prolonged contact or repeated
contact. May cause allergic skin reaction.
SKIN ABSORPTION............No data
EYE CONTACT................Slightly irritating but does not cause eye tissue damage.
INHALATION.................Vapours may be irritating to respiratory system and nasal passages
INGESTION..................Ingestion effects have not been evaluated but are assumed to cause nausea
and vomiting.
EFFECTS OF ACUTE EXPOSURE........Refer to route of entry.
EFFECTS OF CHRONIC EXPOSURE......None known
LD 50 OF MATERIAL, SPECIES &.....Not available
ROUTE
LC 50 OF MATERIAL, SPECIES &.....Not available
ROUTE
EXPOSURE LIMIT OF MATERIAL.......Not available
IRRITANCY OF MATERIAL............Refer to route of entry
SENSITIZING CAPABILITY OF........May cause allergic skin reaction, especially on prolonged or repeated
MATERIAL contact.
CARCINOGENICITY OF MATERIAL......No
REPRODUCTIVE EFFECTS.............Not indicated
SYNERGISTIC MATERIALS............Not applicable
SECTION 07: PREVENTATIVE MEASURES
GLOVES/ TYPE...............Gloves are not normally required for foreseeable conditions of use. During
prolonged contact impervious gloves should be worn.
RESPIRATORY/TYPE...........None required under normal use. Avoid prolonged or repeated breathing of
vapour or mists.
EYE/TYPE...................Safety glasses are optional.
FOOTWEAR/TYPE..............Standard work shoes.
CLOTHING/TYPE..............Standard work clothes.
VENTILATION REQUIREMENTS.........Use adequate general ventilation.
LEAK/SPILL.......................Pick up. Clean with water. Put in appropriate labelled container for
disposal.
WASTE DISPOSAL...................In accordance with municipal, provincial and federal regulations.
HANDLING PROCEDURES AND..........Avoid breathing vapours. Avoid eating and drinking in use. Keep container
EQUIPMENT closed. Protect against physical damage.
STORAGE NEEDS....................Keep from freezing. Keep container closed to avoid evaporation loss. Store
in a cool and dry place, for product integrity.
SPECIAL SHIPPING INSTRUCTIONS....Not regulated
SECTION 08: FIRST AID MEASURES
EYE CONTACT......................Immediately flush eyes with large amounts of water until irritation
subsides. If irritation persists, get medical attention.
INGESTION........................If individual is conscious, give water to dilute stomach contents.
INHALATION.......................Remove to fresh air. If symptoms develop, seek medical attention.
SKIN CONTACT.....................Remove contaminated clothing. Wash affected area with water and soap. Seek
medical attention if irritation occurs or persists.
SECTION 09: PREPARATION INFORMATION
PREPARED BY:.....................Regulatory Affairs
TELEPHONE NUMBER:................(440) 937-7000
DISCLAIMER2:.....................All information, recommendations, and suggestions appearing herein
concerning our product are based upon tests and data believed to be
reliable. However, it is the user's responsibility to determine the
safety, toxicity, and suitability for his own use of the product described
herein. Since the actual use by others is beyond our control, no
guarantee, express or implied, is made by Henkel Corporation as to
the effects of such use, the results obtained, or the safety and toxicity
of the product nor does Henkel Corporation assume any liability
arising out of use, by others, of the product referred to herein. The
information herein is not to be construed as absolutely complete since
additional information may be necessary or desirable when particular or
exceptional conditions or circumstan ces exist or because of applicable
laws or government regulations.
PREPARATION DATE.................FEB 27/2008
CANUTEC EMERGENCY (613) 996-6666
|