Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: bmed_mcgill_ca---mastercraft_578016.asp
Conforms to ANSI Z400.1-2004 Standard (United States, Canada).


Material Safety Data Sheet
Sharpening stone oil

1 . Product and company identification
Common name : Sharpening stone oil.
Material uses : Sharpening kitchen knifes.
Supplier/Manufacturer : MIBRO GROUP
111 SINNOTT ROAD,
TORONTO, ON M1L 4S6
Tel: 416-285-9000
Fax: 416-285-9500
In case of emergency : 416-285-9000
MSDS authored by: : Kemika XXI Inc. + 1-450-435-7475 2006/02/21

2 . Hazards identification
Physical state : Liquid. (Clear.)
Color : Colorless.
Hazard status : This material is classified as not hazardous under OSHA regulations in the United States
and the WHMIS in Canada.
Emergency overview : No specific hazard.
USE WITH CARE.
Follow good industrial hygiene practice.
Potential acute health effects
Eyes :
No known significant effects or critical hazards.
Skin :
No known significant effects or critical hazards.
No known significant effects or critical hazards.
Inhalation :
:
No known significant effects or critical hazards.
Ingestion
Potential chronic health :
Carcinogenic effects: Not classified or listed by IARC, NTP, OSHA, EU and ACGIH.
effects Mutagenic effects: Not available.
Teratogenic effects: Not available.
See toxicological information (section 11)

3 . Composition/information on ingredients
Name CAS number %
No hazardous ingredient


4 . First aid measures
Eye contact : Check for and remove any contact lenses. In case of contact with eyes, rinse
immediately with plenty of water. Get medical attention if symptoms occur.
Skin contact : Wash with soap and water. Get medical attention if symptoms occur.

Inhalation : If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical
attention if symptoms appear.
Ingestion : Do not induce vomiting. Never give anything by mouth to an unconscious person. Get
medical attention if symptoms appear.
Notes to physician : No specific antidote. Medical staff must contact Poison Control Center.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training.


Page: 1/5
: 2006/02/21
Date of issue
Sharpening stone oil




5 . Fire-fighting measures
Flammability of the product : Non-flammable.
Extinguishing media
Suitable : Use an extinguishing agent suitable for the surrounding fire.
Not suitable : None known.
Special exposure hazards : No specific hazard.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing
equipment for fire-fighters apparatus (SCBA) with a full face-piece operated in positive pressure mode.

6 . Accidental release measures
Personal precautions : Immediately contact emergency personnel. Keep unnecessary personnel away. Use
suitable protective equipment.
Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers.
Methods for cleaning up : If emergency personnel are unavailable, contain spilled material. For small spills, add
absorbent (soil may be used in the absence of other suitable materials), scoop up
material and place in a sealable, liquid-proof container for disposal. For large spills, dike
spilled material or otherwise contain material to ensure runoff does not reach a waterway.
Place spilled material in an appropriate container for disposal.

7 . Handling and storage
Handling : Wash thoroughly after handling.
Storage : Keep container tightly closed. Keep container in a cool, well-ventilated area.

8 . Exposure controls/personal protection
Consult local authorities for acceptable exposure limits.
Engineering measures : No special ventilation requirements. Good general ventilation should be sufficient to
control airborne levels. If this product contains ingredients with exposure limits, use
process enclosures, local exhaust ventilation or other engineering controls to keep worker
exposure below any recommended or statutory limits.
Personal protection
Eyes : Safety glasses.
Skin : Lab coat.
Respiratory : A respirator is not needed under normal and intended conditions of product use.
Hands : Rubber gloves.




HMIS Code/Personal :C
protective equipment
Personal protection in case : Safety glasses, goggles or face shield. Impervious gloves. Full suit. Boots. Wear NIOSH-
of a large spill approved self-contained breathing apparatus or equivalent and full protective gear.
Wash hands, forearms and face thoroughly after handling compounds and before eating,
smoking and using the lavatory and at the end of the day. Follow good industrial hygiene
practice.




Page: 2/5
: 2006/02/21
Date of issue
Sharpening stone oil




9 . Physical and chemical properties
Physical state : Liquid. (Clear.)
Color : Colorless.
Relative density : The only known value is 0.85 (Water = 1) (white mineral oil, petroleum).

10 . Stability and reactivity
Stability and reactivity : The product is stable.
Incompatibility with various : Reactive with oxidizing materials.
substances
Hazardous polymerization : Will not occur.

11 . Toxicological information
Acute Effects
Eyes : No known significant effects or critical hazards.
Skin : No known significant effects or critical hazards.
No known significant effects or critical hazards.
Inhalation :
: No known significant effects or critical hazards.
Ingestion
Potential chronic health : Carcinogenic effects: Not classified or listed by IARC, NTP, OSHA, EU and ACGIH.
effects Mutagenic effects: Not available.
Teratogenic effects: Not available.

12 . Ecological information
Environmental precautions : No known significant effects or critical hazards.
Products of degradation : Not available.

13 . Disposal considerations
Waste disposal : The generation of waste should be avoided or minimized wherever possible. Avoid
dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers. Disposal of this product, solutions and any by-products should at all times
comply with the requirements of environmental protection and waste disposal legislation
and any regional local authority requirements.

14 . Transport information
: Not applicable.
AERG
Regulatory information
UN/ IMDG/ IATA DOT/ TDG : Not regulated.




Page: 3/5
: 2006/02/21
Date of issue
Sharpening stone oil




15 . Regulatory information
United States
HCS Classification : Not regulated.
U.S. Federal regulations : All components listed.
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found.
SARA 302/304/311/312 hazardous chemicals: No products were found.
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: No products
were found.
Clean Water Act (CWA) 307: No products were found.
Clean Water Act (CWA) 311: No products were found.
Clean Air Act (CAA) 112 accidental release prevention: No products were found.
Clean Air Act (CAA) 112 regulated flammable substances: No products were found.
Clean Air Act (CAA) 112 regulated toxic substances: No products were found.
State regulations : No products were found.
California prop. 65: No products were found.
Canada
WHMIS (Canada) : Not controlled under WHMIS (Canada).
DSL : All components listed.
This product has been classified in accordance with the hazard criteria of the Canadian CPR and the United States
OSHA. This MSDS contains all the information required by the CPR and OSHA, the American National Standard
Institute (ANSI) Z400.1.

International lists : This product, (and its ingredients) is (are) listed on national inventories, or is (are)
exempted from being listed, Australia (AICS), in Europe (EINECS/ELINCS), in Korea
(TCCL), in Japan (METI), in the Philippines (RA6969).

16 . Other information
HAZARD RATINGS
Hazardous Material : HMIS RATING
Information System (U.S.A.) 0
Health 4- Extreme
3- Serious
1
Fire hazard 2- Moderate
1- Slight
0
Physical Hazard
0- Minimal
C See section 8 for more detailed
Personal protection
information on personal protection.

National Fire Protection :
Flammability
1
Association (U.S.A.)
0 0
Health Reactivity
Special


References : ANSI Z400.1, MSDS Standard, 2004. - Manufacturer's Material Safety Data Sheet. -
29CFR Part1910.1200 OSHA MSDS Requirements. - 49CFR Table List of Hazardous
Materials, UN#, Proper Shipping Names, PG. - Canada Gazette Part II, Vol. 122, No. 2.
Registration SOR/88-64, 31 December 1987. Hazardous Products Act "Ingredient
Disclosure List" - Canadian Transport of Dangerous Goods, Regulations and Schedules,
Clear Language version 2005.
: 2006/02/21
Date of issue
Version :1



Page: 4/5
: 2006/02/21
Date of issue
Sharpening stone oil.


Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above named
supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the
information contained herein. Final determination of suitability of any material is the sole responsibility of the user.
All materials may present unknown hazards and should be used with caution. Although certain hazards are
described herein, we cannot guarantee that these are the only hazards that exist.




Page: 5/5
: 2006/02/21
Date of issue

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
bmed_mcgill_ca---3inoneoil.asp 64742-52-5
bmed_mcgill_ca---3m_scotch-weld_epoxy_potting_compound-adhesive_270_black.asp N/A
bmed_mcgill_ca---3m_super_77_classic_spray_adhesive.asp 110-82-7 107-83-5 115-10-6 75-28-5 74-98-6 96-14-0 75-83-2 79-29-8 110-54-3
bmed_mcgill_ca---4229-liquid.asp 64742-89-8 110-54-3 1330-20-7 67-64-1 100-41-4 112945-52-5 1333-86-4
bmed_mcgill_ca---a9_alum_cutting_fluid.asp 64742-58-1
bmed_mcgill_ca---air-lube-10wnr.asp N/A
bmed_mcgill_ca---alloy_sn-pb_solders-alloys.asp 2005-06-1 7440-31-5 7439-92-1
bmed_mcgill_ca---alvania_grease_rl_2.asp N/A
bmed_mcgill_ca---astro_cut_series_2001_b.asp 64742-52-5 15-20-1
bmed_mcgill_ca---barbasolaloeshavingcream.asp N/A
bmed_mcgill_ca---bernz-o-matic_propane.asp 74-98-6
bmed_mcgill_ca---castrol_stick_wax.asp 8002-74-2 64742-60-5
bmed_mcgill_ca---chemtronics_freez-it.asp 811-97-2
bmed_mcgill_ca---circuitworks_conductive_epoxy_part_a.asp 7440-22-4 025068-38-6 68475-94-5
bmed_mcgill_ca---circuitworks_heat_sink_grease.asp 63148-62-9 1314-13-2 112945-52-5
bmed_mcgill_ca---cool_tool_ii.asp 13-61-4
bmed_mcgill_ca---dow_corning_high_vacuum_grease.asp N/A
bmed_mcgill_ca---epoxy-steel-syringe.asp 140-31-8 112-24-3 90-72-2 1333-86-4
bmed_mcgill_ca---ep_hydraulic_oil_68.asp 64742-54-7 68649-42-3 104-76-7
bmed_mcgill_ca---ethanolmsds.asp N/A
bmed_mcgill_ca---granite_plate_cleaner_2216a51.asp N/A
bmed_mcgill_ca---invoice_flammables_cabinet.asp N/A
bmed_mcgill_ca---ips_weld_on_3.asp 75-09-2 1119-40-0 80-62-6
bmed_mcgill_ca---jbweld_hardener.asp 1317-65-3 7727-43-7 14807-96-6 13463-67-7 1314-98-3 98-00-0 68410-23-1
bmed_mcgill_ca---jbweld_resin.asp 1317-65-3 65997-19-5 25068-38-6 64742-94-5
bmed_mcgill_ca---lepage_contact_cement_cleaner.asp 64742-95-6 9016-45-9
bmed_mcgill_ca---lepage_epoxy_putty.asp 25068-38-6 28064-14-4 32610-77-8 90-72-2
bmed_mcgill_ca---lepage_expoxy_steel.asp 140-31-8 112-24-3 90-72-2 1333-86-4
bmed_mcgill_ca---lepage_polyfilla-cellulose_filler.asp N/A
bmed_mcgill_ca---lepage_poly_instafil.asp N/A
bmed_mcgill_ca---lepage_suregrip_carpenters_glue.asp N/A
bmed_mcgill_ca---loctiter_222ms_threadlocker_low_strength.asp 25852-47-5 9004-96-0 81-07-2 112945-52-5 80-15-9 57-55-6
bmed_mcgill_ca---loctiter_290_threadlocker_wicking_grade.asp 25852-47-5 80-15-9 81-07-2
bmed_mcgill_ca---loctite271.asp 25852-47-5 39382-25-7 81-07-2 80-15-9
bmed_mcgill_ca---loctite609.asp 25852-47-5 868-77-9 68132-02-5 9003-42-3 80-15-9 81-07-2
bmed_mcgill_ca---loctite680.asp 24448-20-2 27813-02-1 39382-25-7 80-15-9 25852-47-5 114-83-0
bmed_mcgill_ca---loctite7471.asp 67-64-1 75-28-5 67-63-0 149-30-4
bmed_mcgill_ca---loctitedegreaser.asp 64742-47-8 5989-27-5
bmed_mcgill_ca---loctite_242_medium_strength_threadlocker_blue_automotive_grade.asp 9004-96-0 81-07-2 112945-52-5 57-55-6 25852-47-5 80-15-9
bmed_mcgill_ca---loctite_401_prism_surface_insensitive_instant_adhesive.asp 7085-85-0
bmed_mcgill_ca---loctite_565_thread_sealant_pst_pipe_sealant_with_ptfe.asp 25852-47-5 68186-73-2 9004-36-8 9002-84-0 13463-67-7 67762-90-7 81-07-2 80-15-9
bmed_mcgill_ca---loctite_620_retaining_compound_slip_fit.asp 24448-20-2 3006-93-7 27813-02-1 80-15-9 112945-52-5 114-83-0
bmed_mcgill_ca---loctite_770_primer_prism.asp 142-82-5
bmed_mcgill_ca---loctite_gasket_eliminatorr_515_flange_sealant.asp 25852-47-5 112945-52-5 79-10-7 80-15-9 81-07-2 114-83-0
bmed_mcgill_ca---loctite_threadlocker_262.asp 25852-47-5 39382-25-7 81-07-2 80-15-9
bmed_mcgill_ca---lubri-delta_acetone.asp 67-64-1
bmed_mcgill_ca---lubriplate.asp 64742-52-5 4485-12-5 68991-19-5 1314-13-2
bmed_mcgill_ca---lucas_oil_red_n_tacky_2.asp N/A
bmed_mcgill_ca---lucas_oil_x-tra_heavy_duty_grease.asp N/A
bmed_mcgill_ca---mastercraft_578016.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC