Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

64742-95-6
9016-45-9

File Name: bmed_mcgill_ca---lepage_contact_cement_cleaner.asp
      03092005                            MATERIAL SAFETY DATA SHEET : 00000181                                        PAGE:1
HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO CANADA L6T 2J4
(905) 459-1140

PRODUCT : LEPAGE CONTACT CEMENT CLEANER




SECTION 01: PRODUCT INFORMATION

MANUFACTURER.....................HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO
CANADA ; L6T 2J4
(905) 459-1140
AFTER HOURS - CANUTEC (613) 996-6666
WHMIS CLASSIFICATION.............B3. D2B. WHEN THIS PRODUCT IS LABELLED AS A CONSUMER PRODUCT IT IS EXEMPT
FROM WHMIS REGULATIONS. (SEE SECTION 12(f) OF THE HAZARDOUS PRODUCTS ACT.)
T.D.G. CLASSIFICATION............FLAMMABLE LIQUIDS, N.O.S. (PETROLEUM NAPHTHA). CLASS 3, UN 1993, PKG GP
II. WHEN THIS PRODUCT IS LABELLED AS A CONSUMER COMMODITY IT IS EXEMPT
FROM T.D.G. REGULATIONS.
PRODUCT NAME.....................LEPAGE CONTACT CEMENT CLEANER
CHEMICAL FAMILY..................ORGANIC SOLVENT BLEND
MATERIAL USE.....................CONTACT CEMENT. CLEANER

SECTION 02: HAZARDOUS INGREDIENTS

HAZARDOUS INGREDIENTS % EXPOSURE LEVELS C.A.S. # LD/50, ROUTE, SPECIES LC/50, ROUTE, SPECIES

Light (petroleum) hydrocarbons 60-100 Not available 64742-95-6 >5g/kg,oral,rat Not available
>3.2g/kg,dermal,
rabbit
Nonyl phenol ethoxylate 1-5 Not available 9016-45-9 1.36g/Kg,oral,rat Not available

SECTION 03: PHYSICAL DATA

PHYSICAL STATE...................Liquid
APPEARANCE & ODOUR...............Colourless. Hydrocarbon odour
ODOUR THRESHOLD (ppm)............Not available
VAPOUR PRESSURE (mm Hg)..........>3.5. @ 38 C
VAPOUR DENSITY (AIR=1)...........4.1
BY VOLUME
BY WEIGHT
EVAPORATION RATE.................< 1 (Butyl acetate = 1)
BOILING POINT (deg C)............160 C
FREEZING POINT (deg C)...........Not applicable
pH...............................Not available
SPECIFIC GRAVITY.................0.875
SOLUBILITY IN WATER (% W/W)......Soluble
COEFFICIENT OF WATER/OIL.........Not available
DISTRIBUTION

SECTION 04: FIRE & EXPLOSION DATA

FLAMMABILITY.....................Combustible liquid
IF YES, UNDER WHICH..............Excessive heat, sparks and open flame
CONDITIONS?
EXTINGUISHING MEDIA..............Foam. CO2. Dry chemical
SPECIAL PROCEDURES...............Although the flash point of this product is greater than 37 C (100 F),
flammable vapours may accumulate in the headspace of containers. Avoid all
sources of ignition when opening. Fire fighters should be equipped with
self-contained breathing apparatus to protect against potentially toxic
and irritating fumes. Water or water foam may cause frothing which can be
violent and possibly endanger fire fighter, especially if sprayed into
container of hot, burning liquid.
FLASH POINT (C), METHOD..........49 C. Tagliabue Closed Tester
AUTO IGNITION TEMPERATURE........> 450 C
UPPER FLAMMABLE LIMIT (% VOL)....7.0
LOWER FLAMMABLE LIMIT (% VOL)....0.6
HAZARDOUS COMBUSTION PRODUCTS....Carbon dioxide. Carbon monoxide. Unknown hydrocarbons
EXPLOSION DATA
SENSITIVITY TO STATIC............Yes. Take precautionary measures against static discharges.
DISCHARGE
SENSITIVITY TO IMPACT......No

SECTION 05: REACTIVITY DATA

CHEMICAL STABILITY:
YES........................Stable under normal temperature and pressure.
NO, WHICH CONDITIONS ?
COMPATIBILITY WITH OTHER
SUBSTANCES:
03092005 MATERIAL SAFETY DATA SHEET : 00000181 PAGE:2
PRODUCT : LEPAGE CONTACT CEMENT CLEANER
SECTION 05: REACTIVITY DATA

YES
NO, WHICH ONES?............Elevated temperatures, sparks and open flames. Direct heat. Acids. Strong
oxidizing agents
REACTIVITY CONDITIONS ?..........Product is stable; hazardous polymerization will not occur.
HAZARDOUS PRODUCTS OF............Oxides of carbon (CO,CO2) at high temperatures.
DECOMPOSITION

SECTION 06: TOXICOLOGICAL PROPERTIES

ROUTE OF ENTRY:
SKIN CONTACT...............Prolonged contact may cause defatting of tissue. Frequent or prolonged
contact may irritate and cause dermatitis.
SKIN ABSORPTION............May be absorbed by the skin.
EYE CONTACT................Direct contact may cause moderate to severe irritation and moderate
transient corneal injury.
INHALATION.................High vapour concentrations are irritating to the eyes and the respiratory
tract. May cause headaches and dizziness; are anaesthetic. May affect
central nervous system.
INGESTION..................Small amounts of liquid aspirated into the respiratory system during
ingestion or from vomiting, may cause bronchopneumonia or pulmonary edema.
EFFECTS OF ACUTE EXPOSURE........Refer to route of entry.
EFFECTS OF CHRONIC EXPOSURE......May aggravate existing skin and eye conditions. May aggravate existing
nervous system conditions.
LD 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2)
ROUTE
LC 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2).
ROUTE
EXPOSURE LIMIT OF MATERIAL.......See hazardous ingredients section (2)
IRRITANCY OF MATERIAL............Moderate to severe. Refer to route of entry
SENSITIZING CAPABILITY OF........None known
MATERIAL
CARCINOGENICITY OF MATERIAL......No
REPRODUCTIVE EFFECTS.............Not available
MUTAGENICITY OF MATERIAL.........Not available
SYNERGISTIC MATERIALS............Not applicable

SECTION 07: PREVENTATIVE MEASURES

GLOVES/ TYPE...............Wear impervious gloves (in neoprene or rubber).
RESPIRATORY/TYPE...........None required under normal use. Use a NIOSH/MSHA approved respirator
whenever mist or spray is generated. Avoid prolonged or repeated breathing
of vapour or mists.
EYE/TYPE...................Safety glasses, goggles or face shield to protect against splashing.
FOOTWEAR/TYPE..............Standard work shoes.
CLOTHING/TYPE..............Standard work clothes.
VENTILATION REQUIREMENTS.........Use adequate local exhaust ventilation.
LEAK/SPILL.......................Eliminate all sources of ignition. Wear a breathing apparatus. Stop leak
if safe to do so. For small spills:. Absorb with paper, sand or sawdust.
Pick up and put in a dustbin. For large spills:. Dike far ahead of spill
for later disposal. No smoking, flames or flares in hazard area! Keep
unnecessary people away. Put in appropriate labelled container for
disposal.
WASTE DISPOSAL...................In accordance with municipal, provincial and federal regulations.
HANDLING PROCEDURES AND..........Avoid breathing vapours. Avoid eating and drinking in use. Keep container
EQUIPMENT closed. Protect against physical damage.
STORAGE NEEDS....................Avoid static electricity - ground containers when transferring product.
Keep away from heat, sparks, and open flames. Keep container closed when
not in use. Store in a cool and dry place, for product integrity.
SPECIAL SHIPPING INSTRUCTIONS....Ship in accordance with applicable Transportation of Dangerous Goods (TDG)
regulations.

SECTION 08: FIRST AID MEASURES

EYE CONTACT......................Immediately flush eyes with large amounts of water until irritation
subsides. If irritation persists, get medical attention.
INGESTION........................If swallowed, DO NOT induce vomiting. Keep at rest. Get prompt medical
attention. DO NOT attempt to give anything by mouth to a drowsy or
unconscious person.
INHALATION.......................Remove victim to fresh air. If not breathing qualified personnel should
administer artificial respiration. Get medical attention.
SKIN CONTACT.....................Remove contaminated clothing. Wash affected area with water and soap. Seek
medical attention if irritation occurs or persists.

SECTION 09: PREPARATION INFORMATION

PREPARED BY:.....................Regulatory Affairs
TELEPHONE NUMBER:................(905) 459-1140
03092005 MATERIAL SAFETY DATA SHEET : 00000181 PAGE:3
PRODUCT : LEPAGE CONTACT CEMENT CLEANER
SECTION 09: PREPARATION INFORMATION

DISCLAIMER2:.....................All information, recommendations, and suggestions appearing herein
concerning our product are based upon tests and data believed to be
reliable. However, it is the user's responsibility to determine the
safety, toxicity, and suitability for his own use of the product described
herein. Since the actual use by others is beyond our control, no
guarantee, express or implied, is made by Henkel Consumer Adhesives as to
the effects of such use, the results obtained, or the safety and toxicity
of the product nor does Henkel Consumer Adhesives assume any liability
arising out of use, by others, of the product referred to herein. The
information herein is not to be construed as absolutely complete since
additional information may be necessary or desirable when particular or
exceptional conditions or circumstan ces exist or because of applicable
laws or government regulations.

PREPARATION DATE.................MAR 09/2005

CANUTEC EMERGENCY (613) 996-6666

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
bmed_mcgill_ca---3inoneoil.asp 64742-52-5
bmed_mcgill_ca---3m_scotch-weld_epoxy_potting_compound-adhesive_270_black.asp N/A
bmed_mcgill_ca---3m_super_77_classic_spray_adhesive.asp 110-82-7 107-83-5 115-10-6 75-28-5 74-98-6 96-14-0 75-83-2 79-29-8 110-54-3
bmed_mcgill_ca---4229-liquid.asp 64742-89-8 110-54-3 1330-20-7 67-64-1 100-41-4 112945-52-5 1333-86-4
bmed_mcgill_ca---a9_alum_cutting_fluid.asp 64742-58-1
bmed_mcgill_ca---air-lube-10wnr.asp N/A
bmed_mcgill_ca---alloy_sn-pb_solders-alloys.asp 2005-06-1 7440-31-5 7439-92-1
bmed_mcgill_ca---alvania_grease_rl_2.asp N/A
bmed_mcgill_ca---astro_cut_series_2001_b.asp 64742-52-5 15-20-1
bmed_mcgill_ca---barbasolaloeshavingcream.asp N/A
bmed_mcgill_ca---bernz-o-matic_propane.asp 74-98-6
bmed_mcgill_ca---castrol_stick_wax.asp 8002-74-2 64742-60-5
bmed_mcgill_ca---chemtronics_freez-it.asp 811-97-2
bmed_mcgill_ca---circuitworks_conductive_epoxy_part_a.asp 7440-22-4 025068-38-6 68475-94-5
bmed_mcgill_ca---circuitworks_heat_sink_grease.asp 63148-62-9 1314-13-2 112945-52-5
bmed_mcgill_ca---cool_tool_ii.asp 13-61-4
bmed_mcgill_ca---dow_corning_high_vacuum_grease.asp N/A
bmed_mcgill_ca---epoxy-steel-syringe.asp 140-31-8 112-24-3 90-72-2 1333-86-4
bmed_mcgill_ca---ep_hydraulic_oil_68.asp 64742-54-7 68649-42-3 104-76-7
bmed_mcgill_ca---ethanolmsds.asp N/A
bmed_mcgill_ca---granite_plate_cleaner_2216a51.asp N/A
bmed_mcgill_ca---invoice_flammables_cabinet.asp N/A
bmed_mcgill_ca---ips_weld_on_3.asp 75-09-2 1119-40-0 80-62-6
bmed_mcgill_ca---jbweld_hardener.asp 1317-65-3 7727-43-7 14807-96-6 13463-67-7 1314-98-3 98-00-0 68410-23-1
bmed_mcgill_ca---jbweld_resin.asp 1317-65-3 65997-19-5 25068-38-6 64742-94-5
bmed_mcgill_ca---lepage_contact_cement_cleaner.asp 64742-95-6 9016-45-9
bmed_mcgill_ca---lepage_epoxy_putty.asp 25068-38-6 28064-14-4 32610-77-8 90-72-2
bmed_mcgill_ca---lepage_expoxy_steel.asp 140-31-8 112-24-3 90-72-2 1333-86-4
bmed_mcgill_ca---lepage_polyfilla-cellulose_filler.asp N/A
bmed_mcgill_ca---lepage_poly_instafil.asp N/A
bmed_mcgill_ca---lepage_suregrip_carpenters_glue.asp N/A
bmed_mcgill_ca---loctiter_222ms_threadlocker_low_strength.asp 25852-47-5 9004-96-0 81-07-2 112945-52-5 80-15-9 57-55-6
bmed_mcgill_ca---loctiter_290_threadlocker_wicking_grade.asp 25852-47-5 80-15-9 81-07-2
bmed_mcgill_ca---loctite271.asp 25852-47-5 39382-25-7 81-07-2 80-15-9
bmed_mcgill_ca---loctite609.asp 25852-47-5 868-77-9 68132-02-5 9003-42-3 80-15-9 81-07-2
bmed_mcgill_ca---loctite680.asp 24448-20-2 27813-02-1 39382-25-7 80-15-9 25852-47-5 114-83-0
bmed_mcgill_ca---loctite7471.asp 67-64-1 75-28-5 67-63-0 149-30-4
bmed_mcgill_ca---loctitedegreaser.asp 64742-47-8 5989-27-5
bmed_mcgill_ca---loctite_242_medium_strength_threadlocker_blue_automotive_grade.asp 9004-96-0 81-07-2 112945-52-5 57-55-6 25852-47-5 80-15-9
bmed_mcgill_ca---loctite_401_prism_surface_insensitive_instant_adhesive.asp 7085-85-0
bmed_mcgill_ca---loctite_565_thread_sealant_pst_pipe_sealant_with_ptfe.asp 25852-47-5 68186-73-2 9004-36-8 9002-84-0 13463-67-7 67762-90-7 81-07-2 80-15-9
bmed_mcgill_ca---loctite_620_retaining_compound_slip_fit.asp 24448-20-2 3006-93-7 27813-02-1 80-15-9 112945-52-5 114-83-0
bmed_mcgill_ca---loctite_770_primer_prism.asp 142-82-5
bmed_mcgill_ca---loctite_gasket_eliminatorr_515_flange_sealant.asp 25852-47-5 112945-52-5 79-10-7 80-15-9 81-07-2 114-83-0
bmed_mcgill_ca---loctite_threadlocker_262.asp 25852-47-5 39382-25-7 81-07-2 80-15-9
bmed_mcgill_ca---lubri-delta_acetone.asp 67-64-1
bmed_mcgill_ca---lubriplate.asp 64742-52-5 4485-12-5 68991-19-5 1314-13-2
bmed_mcgill_ca---lucas_oil_red_n_tacky_2.asp N/A
bmed_mcgill_ca---lucas_oil_x-tra_heavy_duty_grease.asp N/A
bmed_mcgill_ca---mastercraft_578016.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC