Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

64742-52-5
15-20-1

File Name: bmed_mcgill_ca---astro_cut_series_2001_b.asp
36 Draffin Road, Hilton, NY 14468 Phone: 800-828-6351 585-392-3434 Fax: 585-392-2691
EMERGENCY NUMBERS: CHEMTREC (800) 424-9300 Monroe Fluid Technology (800) 828-6351
Website: http://www.monroefluid.com
Material Safety Data Sheet


Product Name: ASTRO-CUT B Effective Date: 09/01/05 Date Printed: 09/08/05 Page: 1

HMIS Rating:
Health: 1 Flammability: 0 Reactivity: 0 Personal Protection: B

1) INGREDIENTS: (% wt., unless otherwise noted)

CHEMICAL NAME CAS # %
Heavy Naphthenic, severely hydrotreated 64742-52-5 15-20
chemically neutralized oil

This document is prepared pursuant to the OSHA Hazard Communication Standard (29 CFR 1910.1200). In addition, other
substances not "Hazardous" per this OSHA Standard may be listed. Where proprietary ingredient shows, the identity
may be made available as provided in this standard.

2) PHYSICAL DATA:

215o F.
Boiling Point:
Vapor Pressure: <1
Vapor Density: <1
Solubility In Water: Complete
9.1 卤 0.2
pH: @ 5% in water:
1.0 卤 0.03
Sp. Gravity:
Appearance: amber liquid
Odor: Bland

3) FIRE AND EXPLOSION HAZARD DATA:

Flash Point: None
Method Used: PMCC

FLAMMABLE LIMITS:
LFL: None
UFL: None

EXTINGUISHING MEDIA: Foam or dry chemical
FIRE & EXPLOSION HAZARDS: Intense heat may cause unopened drums to rupture. Cool fire-exposed
surfaces with water.
FIRE-FIGHTING EQUIPMENT: Use NIOSH-approved self-contained breathing apparatus.

4) REACTIVITY DATA:

STABILITY: (conditions to avoid) Stable under normal storage and use conditions
INCOMPATIBILITY: (specific materials to avoid) Strong acids or bases
HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of carbon
HAZARDOUS POLYMERIZATION: Will not occur
15-20-1B
36 Draffin Road, Hilton, NY 14468 Phone: 800-828-6351 585-392-3434 Fax: 585-392-2691
EMERGENCY NUMBERS: CHEMTREC (800) 424-9300 Monroe Fluid Technology (800) 828-6351
Website: http://www.monroefluid.com
Material Safety Data Sheet


Product Name: ASTRO-CUT B Effective Date: 09/01/05 Date Printed: 09/08/05 Page: 2



5) ENVIRONMENTAL AND DISPOSAL INFORMATION:

ACTION TO TAKE FOR SPILLS/LEAKS: Contain spill, collect onto inert absorbent. Do not flush into
drain or sewers. Place in a DOT approved container for disposal.
DISPOSAL METHOD: Dispose of according to federal, state and local regulations.

6) HEALTH HAZARD DATA:

EYE: Contact may cause irritation.
SKIN CONTACT: Prolonged or repeated contact may cause drying and defatting of the skin, leading to
irritation.
SKIN ABSORPTION: Not likely to occur
INGESTION: Small amounts ingested incidental to normal handling are not likely to cause injury; Larger
amounts ingested may cause injury.
INHALATION: Inhalation of vapors or mist may be irritating to respiratory passages.
SYSTEMIC (other target organ) EFFECTS: None known
TERATOLOGY (birth defects): No adverse effects expected
REPRODUCTIVE EFFECTS: No adverse effects expected
MUTAGENICITY (effects on genetic material): No adverse effects expected
CARCINOGENICITY: IARC: NO NTP: NO OSHA: NO

7) FIRST AID:

EYES: Flush with large amounts of water.
SKIN: Wash off with soap in flowing water or shower.
INGESTION: Consult a physician.
INHALATION: Remove to fresh air. If symptoms persist, consult a physician.
NOTE TO PHYSICIAN: Treatment of overexposure should be directed toward the control of symptoms
and the clinical condition.

8) HANDLING PRECAUTIONS :

EXPOSURE GUIDELINE:
Heavy Naphthenic, severely hydrotreated chemically neutralized oil (as mist) OSHA PEL: 5 mg/m3
VENTILATION: General room ventilation should be satisfactory. Local exhaust ventilation may be
necessary if misting is generated.
RESPIRATORY PROTECTION: None normally required. If mist is in excess of 5 mg/m3 , use NIOSH-
approved respirator.
SKIN PROTECTION: Oil-resistant gloves for prolonged or repeated contact
EYE PROTECTION: Safety glasses




15-20-1B
36 Draffin Road, Hilton, NY 14468 Phone: 800-828-6351 585-392-3434 Fax: 585-392-2691
EMERGENCY NUMBERS: CHEMTREC (800) 424-9300 Monroe Fluid Technology (800) 828-6351
Website: http://www.monroefluid.com
Material Safety Data Sheet


Product Name: ASTRO-CUT B Effective Date: 09/01/05 Date Printed: 09/08/05 Page: 3



9) ADDITIONAL INFORMATION:

SPECIAL PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
Product contains Amines. Sodium Nitrite or other nitrosating agents should not be added to this
product. This step will prevent the formation of nitrosamines which are known to be animal carcinogens.
Launder contaminated clothes before reuse. Avoid prolonged breathing of mist and vapors. Use as
directed. Normal precautions common to good manufacturing practices should be followed in handling
and storing. Store away from food. Wash hands before eating, drinking or smoking and after handling.

REGULATORY INFORMATION: (Not meant to be all-inclusive--selected regulations represented).

NOTICE: The information herein is presented in good faith and believed to be accurate as of the effective date shown above.
However, no warranty, express or implied, is given. Regulatory requirements are subject to change and may differ from one
location to another; it is the buyer's responsibility to ensure that its activities comply with federal, state or provincial, and local
laws and regulations. See MSD Sheet for health and safety information.

TOXIC SUBSTANCES CONTROL ACT (TSCA):

The components of this product are listed on the TSCA inventory.

This product contains the toxic chemical or chemicals listed below, which are subject to the supplier notification requirements of
Section 313 of the Superfund Amendments and Reauthorization Act of 1986 ("SARA") and the requirements of 40 CFR part 372.
None

This notice must not be detached from the foregoing MSDS. If the MSDS is copied for any reason, including distribution, this
notice must also be copied and accompany all redistributed MSDS'. Failure to do so may subject you to penalties under law.
This product contains the following ingredient(s) which are regulated under the Clean Air Act Section 112 hazardous air
pollutants and is subject to all reporting requirements of CERCLA (Superfund). None

10) TRANSPORTATION INFORMATION:

PROPER SHIPPING NAME: Non-regulated

DOT HAZARD CLASS: Non-regulated




15-20-1B

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
bmed_mcgill_ca---3inoneoil.asp 64742-52-5
bmed_mcgill_ca---3m_scotch-weld_epoxy_potting_compound-adhesive_270_black.asp N/A
bmed_mcgill_ca---3m_super_77_classic_spray_adhesive.asp 110-82-7 107-83-5 115-10-6 75-28-5 74-98-6 96-14-0 75-83-2 79-29-8 110-54-3
bmed_mcgill_ca---4229-liquid.asp 64742-89-8 110-54-3 1330-20-7 67-64-1 100-41-4 112945-52-5 1333-86-4
bmed_mcgill_ca---a9_alum_cutting_fluid.asp 64742-58-1
bmed_mcgill_ca---air-lube-10wnr.asp N/A
bmed_mcgill_ca---alloy_sn-pb_solders-alloys.asp 2005-06-1 7440-31-5 7439-92-1
bmed_mcgill_ca---alvania_grease_rl_2.asp N/A
bmed_mcgill_ca---astro_cut_series_2001_b.asp 64742-52-5 15-20-1
bmed_mcgill_ca---barbasolaloeshavingcream.asp N/A
bmed_mcgill_ca---bernz-o-matic_propane.asp 74-98-6
bmed_mcgill_ca---castrol_stick_wax.asp 8002-74-2 64742-60-5
bmed_mcgill_ca---chemtronics_freez-it.asp 811-97-2
bmed_mcgill_ca---circuitworks_conductive_epoxy_part_a.asp 7440-22-4 025068-38-6 68475-94-5
bmed_mcgill_ca---circuitworks_heat_sink_grease.asp 63148-62-9 1314-13-2 112945-52-5
bmed_mcgill_ca---cool_tool_ii.asp 13-61-4
bmed_mcgill_ca---dow_corning_high_vacuum_grease.asp N/A
bmed_mcgill_ca---epoxy-steel-syringe.asp 140-31-8 112-24-3 90-72-2 1333-86-4
bmed_mcgill_ca---ep_hydraulic_oil_68.asp 64742-54-7 68649-42-3 104-76-7
bmed_mcgill_ca---ethanolmsds.asp N/A
bmed_mcgill_ca---granite_plate_cleaner_2216a51.asp N/A
bmed_mcgill_ca---invoice_flammables_cabinet.asp N/A
bmed_mcgill_ca---ips_weld_on_3.asp 75-09-2 1119-40-0 80-62-6
bmed_mcgill_ca---jbweld_hardener.asp 1317-65-3 7727-43-7 14807-96-6 13463-67-7 1314-98-3 98-00-0 68410-23-1
bmed_mcgill_ca---jbweld_resin.asp 1317-65-3 65997-19-5 25068-38-6 64742-94-5
bmed_mcgill_ca---lepage_contact_cement_cleaner.asp 64742-95-6 9016-45-9
bmed_mcgill_ca---lepage_epoxy_putty.asp 25068-38-6 28064-14-4 32610-77-8 90-72-2
bmed_mcgill_ca---lepage_expoxy_steel.asp 140-31-8 112-24-3 90-72-2 1333-86-4
bmed_mcgill_ca---lepage_polyfilla-cellulose_filler.asp N/A
bmed_mcgill_ca---lepage_poly_instafil.asp N/A
bmed_mcgill_ca---lepage_suregrip_carpenters_glue.asp N/A
bmed_mcgill_ca---loctiter_222ms_threadlocker_low_strength.asp 25852-47-5 9004-96-0 81-07-2 112945-52-5 80-15-9 57-55-6
bmed_mcgill_ca---loctiter_290_threadlocker_wicking_grade.asp 25852-47-5 80-15-9 81-07-2
bmed_mcgill_ca---loctite271.asp 25852-47-5 39382-25-7 81-07-2 80-15-9
bmed_mcgill_ca---loctite609.asp 25852-47-5 868-77-9 68132-02-5 9003-42-3 80-15-9 81-07-2
bmed_mcgill_ca---loctite680.asp 24448-20-2 27813-02-1 39382-25-7 80-15-9 25852-47-5 114-83-0
bmed_mcgill_ca---loctite7471.asp 67-64-1 75-28-5 67-63-0 149-30-4
bmed_mcgill_ca---loctitedegreaser.asp 64742-47-8 5989-27-5
bmed_mcgill_ca---loctite_242_medium_strength_threadlocker_blue_automotive_grade.asp 9004-96-0 81-07-2 112945-52-5 57-55-6 25852-47-5 80-15-9
bmed_mcgill_ca---loctite_401_prism_surface_insensitive_instant_adhesive.asp 7085-85-0
bmed_mcgill_ca---loctite_565_thread_sealant_pst_pipe_sealant_with_ptfe.asp 25852-47-5 68186-73-2 9004-36-8 9002-84-0 13463-67-7 67762-90-7 81-07-2 80-15-9
bmed_mcgill_ca---loctite_620_retaining_compound_slip_fit.asp 24448-20-2 3006-93-7 27813-02-1 80-15-9 112945-52-5 114-83-0
bmed_mcgill_ca---loctite_770_primer_prism.asp 142-82-5
bmed_mcgill_ca---loctite_gasket_eliminatorr_515_flange_sealant.asp 25852-47-5 112945-52-5 79-10-7 80-15-9 81-07-2 114-83-0
bmed_mcgill_ca---loctite_threadlocker_262.asp 25852-47-5 39382-25-7 81-07-2 80-15-9
bmed_mcgill_ca---lubri-delta_acetone.asp 67-64-1
bmed_mcgill_ca---lubriplate.asp 64742-52-5 4485-12-5 68991-19-5 1314-13-2
bmed_mcgill_ca---lucas_oil_red_n_tacky_2.asp N/A
bmed_mcgill_ca---lucas_oil_x-tra_heavy_duty_grease.asp N/A
bmed_mcgill_ca---mastercraft_578016.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC