Monday, May 22, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: PrintMatic Porelon Fingerprint Ink Roller System
MSDS No.: PIP100/H/R
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
1
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 0
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
1
Last Update: 2-25-2008 Expiration Date:
0
X Liquid Gas Solid
Chemical State:
C
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
X
111422 Diethanolamine 1.3 3 ppm 3 ppm
1330785 Tricresyl phosphate >10 NE NE
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic Fire Pressure Reactive
Hazardous Identification Information:
May irritate digestive tract. May irritate skin with prolonged contact. May irritate eyes.
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Acute: Gastrointestinal disturbances
Signs and Symptoms:
Medical Conditions Generally Aggravated by Exposure:
Skin, eye, respiratory diseases
Emergency and First Aid Procedures:
Monday, May 22, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: PrintMatic Porelon Fingerprint Ink Roller System
MSDS No.: PIP100/H/R
Inhalation: Remove to fresh air immediately. Get medical attention if symptoms persist.
Ingestion: Get medical attention immediately.
Skin: Wash immediately with soap and water. Apply skin cream if irritated. Seek medical attention if any symptoms occur.
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Do not allow victim to
rub or keep eyes closed. Get medical aid immediately.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: NE Lower Explosive Limit: NE Upper Explosive Limit: NE
F.P. Method:
Fire Extinguishing Media: Water spray, carbon dioxide, dry chemical
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing.
Unusual Fire and Explosion:
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear latex gloves. If ink is squeezed from structure, wipe up with rags or other dry absorbent. Use suitable ink cleaner to remove
any residue. Dispose according to local, state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in closed container. Avoid incompatible materials. Use only in well-ventilated areas. Avoid contact with eyes. Avoid
frequent or prolonged contact with skin. Wash thoroughly after handling.
Other Precautions:
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, latex gloves, protective clothing
Monday, May 22, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: PrintMatic Porelon Fingerprint Ink Roller System
MSDS No.: PIP100/H/R
IX. Physical and Chemical Properties:
Boiling Point: NE Melting Point: NE
Evaporation Rate (Butyl Acetate = 1): <1* Vapor Pressure (mm Hg.): Nil
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): >1
Solubility In Water: Not established Appearance and Odor:
Other Information: * Evaporation Rate: (n-Butyl acetate = 1)
** Appearance & Odor: Black ink within PVC slurry; hydrocarbon odor
X. Stability and Reactivity:
Stability:
Stable
Incompatibility (Materials to Avoid):
Strong oxidizing agents
Decomposition/By Products:
Carbon oxides, nitrogen oxides, hydrogen chloride, acetic acid
Hazardous Polymerization:
Has not been reported.
XI. Toxicological Information:
XII. Ecological Information:
This material has not been tested overall for environmental effects. Prevent from entering sewers or waterways. May be toxic to
some aquatic life.
XIII. Disposal Considerations:
It is the responsibility of the end-user to determine at the time of disposal whether a material containing the product or derived from
the product should be classified as a hazardous waste. Dispose according to local, state, and federal regulations.
XIV. Transport Information:
Keep in closed container. Avoid incompatible materials. Avoid contact with eyes. Avoid frequent or prolonged contact with skin.
Wash thoroughly after handling.
XV. Regulatory Information:
All ingredients are listed on the TSCA inventory.
Tricresyl phosphate is listed as a DOT marine pollutant in 49 CFR 172.101, Appendix B.
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
Monday, May 22, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: PrintMatic Porelon Fingerprint Ink Roller System
MSDS No.: PIP100/H/R
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|