Tuesday, May 23, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: S-3 Ampoule Reagent
MSDS No.: SF298S3
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
2
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 1
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
2
Last Update: 2-25-2008 Expiration Date:
1
X Liquid Gas Solid
Chemical State:
H
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
64197 Acetic acid >1 10 ppm 10 ppm 103 F
7732185 Water <99 None None 212 F
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic X Fire Pressure X Reactive
Hazardous Identification Information:
Flammable. May cause respiratory and digestive tract burns. May cause skin and eye burns.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Acute: Possible skin and eye burns
Chronic: Dermatitis, chronic bronchitis, erosion of teeth
Signs and Symptoms:
Ingestion: Severe pain, nausea, vomiting, diarrhea, shock
Medical Conditions Generally Aggravated by Exposure:
Skin, respiratory, eye diseases
Emergency and First Aid Procedures:
Tuesday, May 23, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: S-3 Ampoule Reagent
MSDS No.: SF298S3
Inhalation: Remove to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen (To be
administered by qualified medical personnel only!) Get medical attention.
Ingestion: DO NOT induce vomiting. If victim is conscious and alert, give 2-4 cups of milk or water. (Never give anything by
mouth to an unconscious person!) Get medical attention immediately.
Skin: Flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing. Seek medical attention.
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Do not allow victim to
rub or keep eyes closed. Get medical aid immediately.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: 103 F Lower Explosive Limit: 5.4% Upper Explosive Limit: 16.0%
F.P. Method:
Fire Extinguishing Media: Dry chemical, carbon dioxide, water spray, alcohol-resistant foam
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing. Water may be used to cool fire-exposed containers.
Unusual Fire and Explosion:
Reacts with most metals to form combustible hydrogen gas.
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged and then disposed of according to local, state, and federal regulations.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear vapor respirator, safety goggles, and rubber gloves. Remove sources of ignition (i.e. open flames, sparks). Use water spray
to dilute to a non-flammable mixture. Soak up with inert absorbent material (dry soda ash or calcium carbonate recommended; do
not use flammable substances such as sawdust). Ventilate and wash spill site with soap and water after collection. Dispose
according to local, state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in closed container. Protect from freezing. Keep cool and dry. Avoid ignition sources (heat, open flame, spark). Avoid
incompatible materials. Use only in well-ventilated areas. Avoid contact with skin and eyes. Avoid inhalation and ingestion. Wash
thoroughly after handling.
Other Precautions:
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged and then disposed of according to local, state, and federal regulations.
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, gloves, vapor respirator, protective clothing
Tuesday, May 23, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: S-3 Ampoule Reagent
MSDS No.: SF298S3
IX. Physical and Chemical Properties:
Boiling Point: 118 C Melting Point: 16.7 C
Evaporation Rate (Butyl Acetate = 1): 0.97 Vapor Pressure (mm Hg.): 11.4
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): 2.07
Solubility In Water: Soluble; releases heat/vapor Appearance and Odor:
Other Information:
X. Stability and Reactivity:
Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Incompatibility (Materials to Avoid):
Acetaldehyde, 2-aminoethanol, ammonium nitrate, bromine pentafluoride, chlorine trifluoride, acids, anhydrides, diallyl methyl
carbinol + ozone, ethylene diamine, ethyleneimene, peroxides, acetone, oleum, permanganates, phosphorus isocyanate,
phosphorus trichloride, hydroxides, potassium t-butoxide, xylene, metals, ignition sources (heat, open flame, spark). See NFPA
Fire Protection guide for all acetic acid incompatibility specifics.
Decomposition/By Products:
Carbon monoxide and dioxide, combustible hydrogen gas
Hazardous Polymerization:
Has not been reported.
XI. Toxicological Information:
XII. Ecological Information:
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
XIV. Transport Information:
Keep in closed container. Protect from freezing. Keep cool and dry. Avoid ignition sources (heat, open flame, spark). Avoid
incompatible materials. Avoid contact with skin and eyes. Avoid inhalation and ingestion. Wash thoroughly after handling.
XV. Regulatory Information:
All ingredients are listed on the TSCA inventory.
Acetic acid is listed as a Hazardous Substance under the Clean Water Act.
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
Tuesday, May 23, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: S-3 Ampoule Reagent
MSDS No.: SF298S3
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|