Tuesday, May 23, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Small Particle Reagent--White
MSDS No.: SPR200
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
1
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 0
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
1
Last Update: 2-27-2008 Expiration Date:
0
X Liquid Gas Solid
Chemical State:
J
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
139888 Niaproof 4 0.5 NE NE
13463677 Titanium dioxide Trace 15 mg/m3 10 mg/m3 5 mg/m3
7732185 Water 99.5 None None 212 F
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic Fire Pressure Reactive
Hazardous Identification Information:
May be harmful if inhaled, ingested, or absorbed through the skin. Respiratory and digestive tract irritant. May irritate skin and
eyes.
The chemical, physical, and toxicological properties of tergitol have not been thoroughly investigated.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Chronic: Skin drying and cracking
Signs and Symptoms:
Acute exposure: Burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, vomiting
Inhalation: Cough, discomfort, difficulty breathing, shortness of breath
Skin: Rash
Eyes: Tearing, blurry vision
Tuesday, May 23, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Small Particle Reagent--White
MSDS No.: SPR200
Medical Conditions Generally Aggravated by Exposure:
Skin, eye, respiratory, liver, kidney diseases
Emergency and First Aid Procedures:
Inhalation: Remove to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen (To be
administered by qualified medical personnel only!) Get medical attention.
Ingestion: If victim is conscious and alert, rinse out mouth with water. (Never give anything by mouth to an unconscious person!)
Get medical attention immediately.
Skin: Flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing. Seek medical attention.
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Do not allow victim to
rub or keep eyes closed. Get medical aid immediately.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: NE Lower Explosive Limit: NE Upper Explosive Limit: NE
F.P. Method:
Fire Extinguishing Media: Use proper extinguishing media suitable for surrounding fire.
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing.
Unusual Fire and Explosion:
Dust can pose explosion hazard if dispersed in air.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear vapor respirator, safety goggles, and rubber gloves. Remove sources of ignition (i.e. open flames, sparks). Soak up with
inert absorbent material (sand or vermiculite recommended; do not use flammable substances such as sawdust). Ventilate and
wash spill site after collection. Dispose according to local, state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in tightly closed container. Keep cool and dry. Avoid incompatible materials. Use only in well-ventilated areas. Avoid
inhalation. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling.
Other Precautions:
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, gloves, dust & vapor respirator, protective clothing
Tuesday, May 23, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Small Particle Reagent--White
MSDS No.: SPR200
IX. Physical and Chemical Properties:
Boiling Point: ~212 F Melting Point: ~32 F
Evaporation Rate (Butyl Acetate = 1): NE Vapor Pressure (mm Hg.): NE
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): NE
Solubility In Water: Partial Appearance and Odor:
Other Information:
X. Stability and Reactivity:
Stability:
Stable
Incompatibility (Materials to Avoid):
Ignition sources (heat, open flame, spark), strong oxidizing agents, strong bases and acids, acid chlorides and anhydrides, steel
Decomposition/By Products:
Carbon monoxide and dioxide, sulfur oxides
Hazardous Polymerization:
Will not occur.
XI. Toxicological Information:
The toxicological properties of tergitol have not been thoroughly investigated.
XII. Ecological Information:
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
XIV. Transport Information:
Keep in tightly closed container. Keep cool and dry. Avoid incompatible materials. Avoid inhalation. Avoid contact with skin, eyes,
and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling.
XV. Regulatory Information:
All ingredients are listed on the TSCA inventory.
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
Tuesday, May 23, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Small Particle Reagent--White
MSDS No.: SPR200
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|