Tuesday, May 23, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Rest-O-Plas
MSDS No.: RPR1006
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
4
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
2 1
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
2
4
Last Update: 2-25-2008 Expiration Date:
1
X Liquid Gas Solid
Chemical State:
H
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
141786 Ethyl acetate 100 400 ppm 400 ppm 24 F
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic X Fire X Pressure Reactive
Hazardous Identification Information:
Flammable! May be harmful if inhaled. Respiratory and digestive tract irritant. Skin and irritant. May cause central nervous
system depression. May cause liver and kidney damage.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Chronic: Dermatitis
Signs and Symptoms:
Ingestion: Headache, drowsiness, unconsciousness
Medical Conditions Generally Aggravated by Exposure:
Skin, eye, respiratory, liver, kidney, central nervous system diseases
Emergency and First Aid Procedures:
Tuesday, May 23, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Rest-O-Plas
MSDS No.: RPR1006
Inhalation: Remove to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen (To be
administered by qualified medical personnel only!) Get medical attention.
Ingestion: If victim is conscious and alert, give 2-4 cups of milk or water. (Never give anything by mouth to an unconscious
person!) Get medical attention immediately.
Skin: Flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing. Seek medical attention.
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Do not allow victim to
rub or keep eyes closed. Get medical aid immediately.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: 24 F Lower Explosive Limit: 2.2 Upper Explosive Limit: 9.0
F.P. Method:
Fire Extinguishing Media: Water spray or fog, dry chemical, carbon dioxide, chemical or alcohol-resistant foam
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing. Water may be ineffective, but may be used to cool fire-exposed
containers. DO NOT use straight streams of water. Cool containers with flooding amounts of water until well after fire is out.
Unusual Fire and Explosion:
Vapors from this product may travel some distance from original point to an ignition source and flash back. Containers may
explode in heat of fire.
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged and then disposed of according to local, state, and federal regulations.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear vapor respirator, safety goggles, and rubber gloves. Remove sources of ignition (i.e. open flames, sparks). Soak up with
inert absorbent material (earth, sand, or vermiculite recommended; do not use flammable substances such as sawdust). Dispose
according to local, state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in tightly closed container. Keep cool and dry. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible
materials. Electrically bond and ground all containers and equipment before transfer or use of material. Use only in well-ventilated
areas. Avoid contact with skin, eyes, and clothing. Avoid inhalation and ingestion. Wash thoroughly after handling.
Other Precautions:
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged and then disposed of according to local, state, and federal regulations.
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, gloves, vapor respirator, protective clothing
Tuesday, May 23, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Rest-O-Plas
MSDS No.: RPR1006
IX. Physical and Chemical Properties:
Boiling Point: 77 C Melting Point: -83 C
Evaporation Rate (Butyl Acetate = 1): 6.0 Vapor Pressure (mm Hg.): 100
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): 3.0
Solubility In Water: Moderate Appearance and Odor:
Other Information:
X. Stability and Reactivity:
Stability:
Unknown
Incompatibility (Materials to Avoid):
Ignition sources (heat, open flame, spark), acids, lithium aluminum hydride + 2-chloromethylfuran, lithium tetrahydroaluminate,
oleum, potassium t-butoxide, nitrates, strong oxidizers, strong alkalies
Decomposition/By Products:
Hazardous Polymerization:
Has not been reported.
XI. Toxicological Information:
May be harmful if inhaled. May cause central nervous system depression. May cause liver and kidney damage.
XII. Ecological Information:
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
RCRA U-Series: Waste no. U112 (Ignitable waste)
XIV. Transport Information:
Keep in tightly closed container. Keep cool and dry. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible
materials. Electrically bond and ground all containers and equipment before transfer or use of material. Avoid contact with skin,
eyes, and clothing. Avoid inhalation and ingestion. Wash thoroughly after handling.
IATA
Shipping name: Ethyl acetate
Hazard class: 3
UN no.: 1173
Packing group: II
Flammable liquid!
Tuesday, May 23, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Rest-O-Plas
MSDS No.: RPR1006
XV. Regulatory Information:
Ethyl acetate is listed on the TSCA inventory.
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|