Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Detection Paste, White/Blue
MSDS No.: UVT209
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
1
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 1
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
1
Last Update: 2-27-2008 Expiration Date:
1
X Liquid Gas Solid
Chemical State:
F
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
8009038 Petrolatum 72.7 5 mg/m3 5 mg/m3 400 F
68611712 Zinc sulfide (blue) 27.3 NE 1 mg/m3
III. Hazardous Identification:
Hazard Category:
X Acute Chronic Fire Pressure Reactive
Hazardous Identification Information:
If this product is used as indicated it is unlikely that any adverse health issues will occur. Inhalation or ingestion of significant
amounts may cause respiratory irritation and/or gastric disturbances.
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Signs and Symptoms:
Ingestion: Nausea, vomiting, diarrhea, abdominal pain
Skin: Rash, redness
Medical Conditions Generally Aggravated by Exposure:
Skin, eye, respiratory diseases
Thursday, June 29, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Detection Paste, White/Blue
MSDS No.: UVT209
Emergency and First Aid Procedures:
Inhalation: It is unlikely that emergency treatment will be required. Get medical attention if needed
Ingestion: Seek medical attention.
Skin contact: It is unlikely that emergency treatment will be needed. If adverse conditions occur, wash with soap and water. Seek
medical attention if needed
Eyes: Wash with large amounts of water. Get medical attention if needed.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: 400 F Lower Explosive Limit: NE Upper Explosive Limit: NE
F.P. Method:
Fire Extinguishing Media: Dry chemical, water fog, carbon dioxide, foam, sand, earth
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing. Water may be ineffective, but may be used to cool fire-exposed
containers.
Unusual Fire and Explosion:
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged and then disposed of according to local, state, and federal regulations.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear safety goggles and rubber gloves. Remove all ignition sources (heat, open flame, spark). Shut off leak. Dike if necessary.
After cooling and solidification, scrape and/or shovel up material. Clean area with absorbent material (do not use flammable
substances such as sawdust). Dispose according to local, state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in closed container. Store below 200 F. Avoid ignition sources (heat, open flame, spark). Avoid incompatible materials.
Use only in well-ventilated areas. Wash thoroughly after handling.
Other Precautions:
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged and then disposed of according to local, state, and federal regulations.
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, gloves, dust respirator, protective clothing
Thursday, June 29, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Detection Paste, White/Blue
MSDS No.: UVT209
IX. Physical and Chemical Properties:
Boiling Point: NE Melting Point: 100 F
Evaporation Rate (Butyl Acetate = 1): 0-25 Vapor Pressure (mm Hg.): <0.0005
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): N/A
Solubility In Water: Nil Appearance and Odor:
Other Information: Natural color: White
Fluorescent color: Brilliant blue
X. Stability and Reactivity:
Stability:
Stable under normal conditions.
Incompatibility (Materials to Avoid):
Ignition sources (heat, open flame, spark), strong oxidizing agents, hydrogen peroxide, bromine, mineral acids
Decomposition/By Products:
Carbon monoxide & dioxide, oxides of sulfur, hydrogen sulfide
Hazardous Polymerization:
Does not occur.
XI. Toxicological Information:
XII. Ecological Information:
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
XIV. Transport Information:
Keep in closed container. Transport below 200 F. Avoid ignition sources (heat, open flame, spark). Avoid incompatible materials.
Wash thoroughly after handling.
XV. Regulatory Information:
Petrolatum USP grades are fully refined materials meeting the requirements of the United States Pharmacopeia XXII and the
requirements of the Food & Drug Administration as per Title 21 CFR parts 172.880 & 178.3700.
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
Thursday, June 29, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Detection Paste, White/Blue
MSDS No.: UVT209
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|