Wednesday, May 24, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Tagging Ink
MSDS No.: UV999E
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
4
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 1
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
4
Last Update: 2-27-2008 Expiration Date:
1
X Liquid Gas Solid
Chemical State:
H
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
64175 Ethyl alcohol >95 1000 ppm 1000 ppm
27344065 Fluorescent Brightner <5
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic X Fire Pressure Reactive
Hazardous Identification Information:
FLAMMABLE!
POTENTIAL HEALTH EFFECTS:
EYE: Can cause eye irritatioin. Symptoms include stinging, tearing, redness and swelling of the eyes.
SKIN: May cause mild skin irritation in sensitive people. Prolonged contact may dry the skin.
INGESTION: Ingesting this material may be harmful.
INHALATION: Breathing small amounts of this material during normal handling is not likely to cause harmful effects. Breathing
large amounts may be harmful. Use with adequate ventilation.
SYMPTOMS OF EXPOSURE: Ingestion or inhalation:irregular heartbeat, cyanosis, anesthesia,stomach or intestinal upset
(nausea, vomiting, diarrhea); irritation (the nose, throat, airways); cough, central nervous system depression (dizziness,
drowsiness, weakness, fatigue, nausea, headache, unconsciousness); slowing of breathing rate, blurred vision.
TARGET ORGANS: This product contains ethanol. Alcoholic beverage consumption has been associated with brain damage,
heart damage, and pancreatitus in humans. Exposure to lethal concentrations has shown to cause damage to organs including
liver, kidneys, pancreas, heart, lungs and brain. Although this rarely occurs, survivors of severe intoxication may suffer permanent
neurological damage.
CARCINOGENICITY: This product contains ethanol. IARC has determined that exposure to ethanol through chronic human
consumption of alcoholic beverages can cause cancer. The relevance of this finding to ethanol exposure in industrial
environments is uncertain.
Wednesday, May 24, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Tagging Ink
MSDS No.: UV999E
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Chronic: Dermatitis
Signs and Symptoms:
Inhalation: Headache, irritation of the throat, lungs and airways.
Ingestion: Excitement, headache, dizziness, drowsiness, nausea, collapse, unconsciousness, coma, death due to respiratory
failure
Medical Conditions Generally Aggravated by Exposure:
Skin, lung, eye, central nervous system, kidney, liver diseases
Emergency and First Aid Procedures:
Inhalation: Remove to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen (To be
administered by qualified medical personnel only!) Get medical attention.
Ingestion: If victim is conscious and alert, give 2-4 cups of milk or water. (Never give anything by mouth to an unconscious
person!) Induce vomiting. Get medical attention immediately.
Skin: Flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing. Seek medical attention if
condition warrants.
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Do not allow victim to
rub or keep eyes closed. Get medical aid immediately.
Notes to physician: Effects may be delayed. Ethanol may inhibit metabolism.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: 55 F Lower Explosive Limit: 3.3 vol% Upper Explosive Limit: 28.00 vol%
F.P. Method:
Fire Extinguishing Media: Dry chemical, carbon dioxide, water spray, alcohol-resistant foam
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing. Water may be ineffective, but may be used to cool fire-exposed
containers.
Unusual Fire and Explosion:
Containers may build up pressure when exposed to heat or fire. Vapors from this product may travel some distance from original
point to an ignition source and flash back.
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged and then disposed of according to local, state, and federal regulations.
Wednesday, May 24, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Tagging Ink
MSDS No.: UV999E
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear vapor respirator, safety goggles, and rubber gloves. Remove sources of ignition (i.e. open flames, sparks). Dike if
necessary. Soak up with absorbent material (earth, sand, or vermiculite recommended; do not use flammable substances such as
sawdust). Scoop up with a non-sparking tool. Ventilate and wash spill site after collection. Dispose according to local, state, and
federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in closed container. Keep cool and dry. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials.
Use only in well-ventilated areas. Avoid contact with the eyes. Avoid inhalation and ingestion. Wash thoroughly after handling.
Other Precautions:
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged and then disposed of according to local, state, and federal regulations.
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, gloves (butyl rubber, PVC, neoprene), vapor respirator, protective clothing
IX. Physical and Chemical Properties:
Boiling Point: 170.6 F Melting Point: NA
Evaporation Rate (Butyl Acetate = 1): 1.7 Vapor Pressure (mm Hg.): 45
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): 1.1
Solubility In Water: Appreciable Appearance and Odor:
Other Information:
X. Stability and Reactivity:
Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Incompatibility (Materials to Avoid):
Ignition sources (heat, open flame, spark), strong oxidizing agents.
Decomposition/By Products:
Oxides of carbon, various hydrocarbons.
Hazardous Polymerization:
Will not occur.
Wednesday, May 24, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Tagging Ink
MSDS No.: UV999E
XI. Toxicological Information:
No data.
XII. Ecological Information:
No data.
XIII. Disposal Considerations:
Dispose of according to local, state, and federal regulations.
XIV. Transport Information:
Keep in closed container. Keep cool and dry. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials.
Avoid contact with skin and eyes. Avoid inhalation and ingestion. Wash thoroughly after handling.
IATA
Shipping name: Ethanol solution
Hazard class: 3
UN no.: 1170
Packing group: II
Flammable liquid!
XV. Regulatory Information:
Ethanol is listed on the TSCA inventory.
XVI. Other Information:
This Material Safety Data Sheet identifies ethyl alcohol as a component and gives considerable information concerning the adverse
health and safety concerns associated with ethyl alcohol. Ethyl alcohol is flammable and can cause adverse health reactions if
ingested. However, if reasonable safety precautions are followed and this product is used as intended--the marking of skin with a
solution using ethyl alcohol as a solvent will not cause adverse health effect to the general population.
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|