Wednesday, May 24, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Detection Powder, White/Blue
MSDS No.: UV202
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
1
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 0
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
1
Last Update: 2-27-2008 Expiration Date:
0
X
Liquid Gas Solid
Chemical State:
F
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
557051 Zinc stearate 70 NE 10 mg/m3 350 F
68611712 Zinc sulfide (blue) 30 NE 1 mg/m3
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic Fire Pressure Reactive
Hazardous Identification Information:
If this product is used as indicated it is unlikely that any adverse health issues will occur. Inhalation or ingestion of significant
amounts may cause respiratory irritation and/or gastric disturbances.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Acute: Ingestion of significant amounts may cause gastric Acute: Ingestion of significant amounts may cause gastric
disturbances.
Chronic: Dermatitus
Signs and Symptoms:
Inhalation: Coughing, labored breathing
Ingestion: Nausea, vomiting, diarrhea, abdominal pains
Skin: Redness, rash
Eyes: Inflammation
Medical Conditions Generally Aggravated by Exposure:
Wednesday, May 24, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Detection Powder, White/Blue
MSDS No.: UV202
Skin, eye, respiratory diseases
Emergency and First Aid Procedures:
Inhalation: It is unlikely that emergency treatment will be required. Get medical attention if needed
Ingestion: Seek medical attention.
Skin contact: It is unlikely that emergency treatment will be needed. If adverse conditions occur, wash with soap and water. Seek
medical attention if needed
Eyes: Wash with large amounts of water. Get medical attention if needed.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: >350 F Lower Explosive Limit: NE Upper Explosive Limit: NE
F.P. Method:
Fire Extinguishing Media: Water fog or spray, foam, carbon dioxide, dry chemical
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing.
Unusual Fire and Explosion:
Can pose dust explosion hazard if dispersed in air.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear dust respirator, safety goggles, and rubber gloves. Sweep up and place in bag or vacuum up with proper filter equipped
instrument. Avoid creating dust. Wet dust mopping or wet clean-up is preferred to reduce dusting. Dispose according to local,
state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in closed container. Avoid ignition sources (heat, open flame, spark). Avoid incompatible materials. Use only in
well-ventilated areas. Avoid dust generation and accumulation. Avoid contact with skin and eyes. Wash thoroughly after handling.
Other Precautions:
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, gloves, dust respirator, protective clothing
Wednesday, May 24, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Detection Powder, White/Blue
MSDS No.: UV202
IX. Physical and Chemical Properties:
Boiling Point: NE Melting Point: NE
Evaporation Rate (Butyl Acetate = 1): NE Vapor Pressure (mm Hg.): NE
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): NE
Solubility In Water: Insoluble Appearance and Odor:
Other Information: Natural color: White
Fluorescent color: Brilliant blue
X. Stability and Reactivity:
Stability:
Stable
Incompatibility (Materials to Avoid):
Strong oxidizing agents, mineral acids, ignition sources (heat, open flame, spark)
Decomposition/By Products:
Hydrogen sulfide, sulfur oxides, zinc oxide
Hazardous Polymerization:
Does not occur.
XI. Toxicological Information:
XII. Ecological Information:
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
XIV. Transport Information:
Keep in closed container. Avoid ignition sources (heat, open flame, spark). Avoid incompatible materials. Avoid dust generation
and accumulation. Wash thoroughly after handling.
XV. Regulatory Information:
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
Wednesday, May 24, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Detection Powder, White/Blue
MSDS No.: UV202
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|