Wednesday, May 24, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Mobile Solvent A
MSDS No.: TLC001A
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
4
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
2 1
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
2
4
Last Update: 2-27-2008 Expiration Date:
1
X Liquid Gas Solid
Chemical State:
H
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
67641 Acetone 100 1000 ppm 750 ppm -4 F
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic X Fire Pressure Reactive
Hazardous Identification Information:
FLAMMABLE! Respiratory and digestive tract irritant. Skin and eye irritant. May cause central nervous system depression. May
cause liver and kidney damage.
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Prolonged or repeated exposure may cause dermatitis, skin defatting, conjunctivitis, cataracts, inflammation of the respiratory
tract, weakness, drowsiness, vertigo, hematological changes, anemia, liver and kidney damage
Signs and Symptoms:
Inhalation: Dizziness, drowsiness, stupor
Ingestion: Skin discoloration, nausea, diarrhea, bloody vomit, inebriation (drunkenness), coma
Skin: Cracking
Medical Conditions Generally Aggravated by Exposure:
Skin, eye, respiratory, liver, kidney, blood diseases
Wednesday, May 24, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Mobile Solvent A
MSDS No.: TLC001A
Emergency and First Aid Procedures:
Inhalation: Remove to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen (To be
administered by qualified medical personnel only!) Get medical attention.
Ingestion: If victim is conscious, induce vomiting. Keep head below hips to avoid aspiration. Get medical attention immediately.
Skin: Flush skin with plenty of soap and water for at least 15 minutes. Immediately remove contaminated clothing. Seek medical
attention if condition warrants.
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Do not allow victim to
rub or keep eyes closed. Get medical aid immediately.
Other Health Warnings:
Consumption of alcohol may increase the acute effects of exposure.
V. Fire Fighting Measures:
Flash Point: -4 F Lower Explosive Limit: 2.5 Upper Explosive Limit: 13.0
F.P. Method:
Fire Extinguishing Media: Dry chemical, carbon dioxide, water spray or fog, alcohol-resistant foam
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing. If possible, remove containers from fire area. Water may be
ineffective if flow of flammable liquid is not stopped. Water may be used to cool fire-exposed containers. Evacuate immediately if
containers become discolored, or if rising sound is emitted from containers.
Unusual Fire and Explosion:
Vapors from this product may travel some distance from original point to an ignition source and flash back.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear vapor respirator, safety goggles, and rubber gloves. Shut off at source, if possible to do so without risk. Remove sources of
ignition (i.e. open flames, sparks). Dike area. Soak up with inert absorbent material (do not use flammable substances such as
sawdust). Scoop up with non-sparking equipment. Ventilate and wash spill site after collection. Dispose according to local, state,
and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in closed container. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Electrically bond and
ground all containers and equipment before transfer or use of material. Use only in well-ventilated areas. Avoid breathing vapors.
Avoid contact with skin, eyes, and clothing. Wash thoroughly after handling.
Other Precautions:
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, gloves, vapor respirator, protective clothing
Wednesday, May 24, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Mobile Solvent A
MSDS No.: TLC001A
IX. Physical and Chemical Properties:
Boiling Point: 133 F Melting Point: -139 F
Evaporation Rate (Butyl Acetate = 1): 6.0 Vapor Pressure (mm Hg.): 180.0
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): 2.0
Solubility In Water: Miscible Appearance and Odor:
Other Information:
X. Stability and Reactivity:
Stability:
Stable
Incompatibility (Materials to Avoid):
Acids, aliphatic amines, bromine, bromine trifluoride, bromoform, chloroform, chromium trioxide, chlorides, dioxygen difluoride +
solid carbon dioxide, hexachloromelamine, hydrogen peroxide, nitric compounds, oxidizers, plastics, platinum, potassium
tert-butoxide, rayon, sodium hypobromite, sodium hypoiodite, sulfur dichloride, thiotriazole perchlorate, 1,1,1-trichloroethane,
trichloromelamine, ignition sources (heat, open flame, spark)
Decomposition/By Products:
Carbon oxides
Hazardous Polymerization:
Does not occur.
XI. Toxicological Information:
XII. Ecological Information:
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
RCRA U-Series: waste no. U002 (Ignitable waste)
This material is banned from land disposal according to RCRA.
XIV. Transport Information:
Keep in closed container. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Electrically bond and
ground all containers and equipment before transfer of material. Avoid breathing vapors. Avoid contact with skin, eyes, and
clothing. Wash thoroughly after handling.
IATA
Shipping name: Acetone
Hazard class: 3
UN no.: 1090
Packing group: II
Flammable liquid!
Wednesday, May 24, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Mobile Solvent A
MSDS No.: TLC001A
XV. Regulatory Information:
Acetone is listed on the TSCA inventory.
OSHA flammability class: IB
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|