Wednesday, May 24, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Marking Pen
MSDS No.: UV700
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
3
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
0 1
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
0
3
Last Update: 2-27-2008 Expiration Date:
1
X Liquid Gas Solid
Chemical State:
X
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
123422 Diacetone alcohol Proprietary NE NE
0 Dyes Proprietary NE NE
71363 n-Butanol Proprietary NE NE
71238 n-Propanol Proprietary NE NE 84 F
III. Hazardous Identification:
Hazard Category:
Acute Chronic X Fire Pressure Reactive
Hazardous Identification Information:
Flammable. If this product is used as indicated it is unlikely that any adverse health issues will occur. Inhalation or ingestion of
significant amounts may cause respiratory irritation and/or gastric disturbances.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Signs and Symptoms:
Medical Conditions Generally Aggravated by Exposure:
Skin diseases
Wednesday, May 24, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Marking Pen
MSDS No.: UV700
Emergency and First Aid Procedures:
Inhalation: It is unlikely that emergency treatment will be required. Get medical attention if needed
Ingestion: Seek medical attention.
Skin contact: It is unlikely that emergency treatment will be needed. If adverse conditions occur, wash with soap and water. Seek
medical attention if needed
Eyes: Wash with large amounts of water. Get medical attention if needed.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: 84 F Lower Explosive Limit: 2.2% Upper Explosive Limit: 14.0%
F.P. Method:
Fire Extinguishing Media: Use proper extinguishing media suitable for surrounding fire.
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing.
Unusual Fire and Explosion:
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wipe up with absorbent material and dispose according to local, state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
DO NOT shake marker. Keep cap on marker when not in use. Avoid ignition sources (heat, open flame, spark).
Other Precautions:
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
None under normal use conditions.
Wednesday, May 24, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Marking Pen
MSDS No.: UV700
IX. Physical and Chemical Properties:
Boiling Point: 207 F Melting Point: NE
Evaporation Rate (Butyl Acetate = 1): 1.3 Vapor Pressure (mm Hg.): 13
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): NE
Solubility In Water: Complete Appearance and Odor:
Other Information:
X. Stability and Reactivity:
Stability:
Stable
Incompatibility (Materials to Avoid):
Ignition sources (heat, open flame, spark)
Decomposition/By Products:
Hazardous Polymerization:
Will not occur.
XI. Toxicological Information:
This product is certified by The Art & Creative Materials Institute, Inc., to be labeled in accordance with the voluntary chronic hazard
labeling standard ASTM D-4236 and is labeled with the AP Non Toxic seal. Products bearing the AP approved Product Seal of the
Art & Creative Materials Institute, Inc., are certified in a program of toxicological evaluation by a medical expert, subject to review by
the Institute Toxicological Advisory Board, to contain no materials in sufficient quantities to be toxic or injurious to humans, or to
cause acute or chronic health problems.
XII. Ecological Information:
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
XIV. Transport Information:
Avoid ignition sources (heat, open flame, spark).
XV. Regulatory Information:
This product is not considered toxic under Federal Hazardous Substances Act regulations, Title 16, Part 1500.
The OSHA Hazard Communication Standard does not apply to the product described in this MSDS. The reason for the exemption
is contained in 29 CFR, Part 1910.1200, (b) (6) (ix), as amended July 1, 1994, per the Code of Federal Regulations.
XVI. Other Information:
Wednesday, May 24, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Fluorescent Invisible Marking Pen
MSDS No.: UV700
Using this product under normal, properly instructed procedures should not be hazardous.
The information in this MSDS is forwarded to you for your information. It is not meant to imply that the product is covered by the
Hazard Communication Standard, nor is the MSDS meant to comply with all requirements of the Hazard Communication Standard.
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|