鈥? Anchor-Weld CA7 must be stored and used away from sparks
Fast Drying
and open flame. Avoid contact with eyes and skin. Wear solvent
鈥? High Early Bond Strength
resistant gloves, and safety glasses with side shields.
鈥? Heat & Water Resistant
Avoid breathing vapours, use with adequate ventilation. Wear
DESCRIPTION
an organic vapour respirator when spraying or where ventilation
Anchor-Weld CA7 Carpet Seam Adhesive is a high heat resistant
is inadequate.
solvent-based adhesive. It is fast drying with early bond strength
and good water resistance.
A Material Safety Data Sheet is available on request.
PURPOSE FOR USE
SHELF LIFE
Anchor-Weld CA7 bonds carpet seams together and reduces the
Minimum of 12 months from date of manufacture if stored under
fraying of seams when direct stick or double bond installation
cover between 5潞C and 30潞C.
methods are used.
WARRANTY
LIMITATIONS
Your purchase of this product is subject to Anchor-Weld鈥檚
Because of the wide range of surfaces and floorings, a test of
standard terms and conditions of sale. The representation and
any new combination should be conducted before using. Not
recommendations regarding the products are based on tests
recommended for polystyrene, copper or for external use.
which we believe to be reliable. However, no guarantee of their
accuracy can be made because of the great range of field
PREPARATION
conditions and variations encountered in raw materials,
Ensure the carpet seams are clean, dry and free of dust or dirt.
manufacturing equipment and methods. Thus, the products are
sold with a limited warranty only, and on the condition that
APPLICATION
purchasers will make their own tests to determine the suitability
Apply 3.0mm bead of CA7 along entire edge of both seams.
of the product for their particular purposes. Under no
Allow adhesive to become touch dry. This will take
circumstances will Anchor-Weld be liable to anyone except for
approximately 10-15 minutes depending on atmospheric
replacement of the products or refund of the purchase price.
conditions and can be tested by placing the knuckles onto the
adhesive coat which should feel tacky, but not transfer to the
All other warranties whether express or implied, including without
knuckles. Bring seams together for installation. Roll carpet in
limitation, any warranty of merchantability of fitness of purpose
place shortly after laying.
are expressly disclaimed unless prohibited by law or given in
writing by Anchor-Weld for a specific project.
TYPICAL TECHNICAL DATA
Base: Polychloroprene
Anchor-Weld Technical Services are available to pre-test any
Viscosity: Thick syrup
samples of substrate where the specifier / applicator may believe
Solids: approx. 23%
doubts on application suitability exists.
S.G. approx. 0.82
The tests will aid in determining the proper surface preparation
PACKAGING
method. Following this procedure will remove many of the
Available in 1L containers
unknown variables that affect field success. Please contact your
Anchor-Weld Distributor for further details.
CLEAN UP
ALL SALES ARE EXPRESSLY LIMITED TO THE TERMS AND
Clean up with Anchor-Weld 901 Cleaner.
CONDITIONS OF SALE OF ANCHOR-WELD AUSTRALIA.