K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H 400g BUMPER & TRIM PAINT. (Aerosol)
COMPANY DETAILS
Company: K & H Surface Technologies Pty Ltd.
ACN: 004 510 918
Address: 105 South Gippsland Highway, Dandenong, Victoria, and Australia 3195.
Telephone: (03) 9792 5927. Fax: (03) 9794 5633.
Emergency Telephone Number: Business hours (03) 9792 5927. After hours (03) 59742727
Ask for the Technical Manager.
IDENTIFICATION
PRODUCT NAME: K&H BUMPER &TRIM PAINT. (AEROSOL)
OTHER NAMES: Not relevant
MANUFACTURER鈥橲 PRODUCT CODE: AB938,AB958,AB978,AB994
UN NUMBER 1950
HAZCHEM CODE: 2Y
DANGEROUS GOODS CLASS/SUBSIDARY Class 2.1
RISK:
POISON SCHEDULE NUMBER: Not relevant
USE: satin acrylic aerosol paint
PHYSICAL DESCRIPTION/PROPERTIES
APPEARANCE: Aerosol, colored fine spray
VAPOUR PRESSURE (Pa or mmHg @ 20掳C): Not available
SPECIFIC GRAVITY: 0.98 appro.
FLASH POINT (掳C): Not available
FLAMMABILITY LIMITS (%): Not available
SOLUBILITY IN WATER (g/L): Immiscible
None available
OTHER PROPERTIES:
INGREDIENTS
CHEMICAL ENTITY CAS No. PROPORTIONS
Toluene 108-88-3 10-30%
Ethyl Acetate 141-78-6 <10%
Hydrocarbon propellant(LPG) 30-60%
-Propane 74-98-6
-Butane 106-97-8
Ingredient determined not to be to 100%
hazardous
DATE OF ISSUE:23RD OCT 2003
MSDS NO:100-1- LK PAGE 1 of 4
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H 400g BUMPER & TRIM PAINT. (Aerosol)
HEALTH HAZARD INFORMATION
HEALTH EFFECTS
ACUTE
SWALLOWED Harmful if swallowed. Tends to break into foam if the patient vomits.
Aspiration into lungs may lead to chemical pneumonitis. Ingestion of
larger amounts may cause coma and death.
EYE Vapours are irritating to the eyes.
SKIN Prolonged and repeated skin contact may cause dermatitis due to
defatting effect. Low order of toxicity.
INHALED Inhalation may cause irritation to the mucous membrane & respiratory
tract. May cause central nervous system depression.
CHRONIC Prolonged exposure to vapours may cause somnolence, narcosis, loss of
coordination and impaired judgement. Chronic exposure or intentional
misuse by deliberately concentrating or inhaling contents can be harmful
or fatal.
FIRST AID:
SWALLOWED If swallowed, give a glass of water. Do not induce vomiting. Lean victim
forward to reduce the risk of aspiration. Never give drink to unconscious
person. Seek medical advice. For further advice call Poisons Information
Centre.
EYE Hold eyes open & flood with water for at least 15 minutes. Seek
immediate medical advice.
SKIN Remove contaminated clothing and wash area with soap and water. Seek
medical aid if irritation occurs.
INHALED Remove person to fresh air. Lay patient down and keep warm. If
breathing is shallow, apply oxygen and seek medical aid.
FIRST AID FACILITIES Where bodily contact may occur, an eye wash station & safety shower or
supply of clean water should be readily available.
ADVICE TO DOCTOR Treat symptomatically.
PRECAUTIONS FOR USE
EXPOSURE STANDARDS None assigned for the mixture.
Toluene TWA: 100ppm 377 mg/m3 STEL: 150ppm 565 mg/m3
Ethyl Acetate TWA: 400ppm 1440 mg/m3
Propane Simple asphyxiant*--- Refer to other information.
DATE OF ISSUE:23RD OCT 2003
MSDS NO:100-1- LK PAGE 2 of 4
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H 400g BUMPER & TRIM PAINT. (Aerosol)
ENGINEERING CONTROLS Provide sufficient ventilation to keep airborne levels below the exposure
limit. Where vapours or mists are generated, particularly in enclosed
areas, and natural ventilation is inadequate, a flameproof exhaust
ventilation system is required. Product can accumulate static discharges
which can cause an incendiary electrical discharge. Refer to AS1940-
The storage and handling of flammable and combustible liquids and AS
2430- Explosive gas atmospheres for further information concerning
ventilation requirements.
PERSONAL PROTECTION
RESPIRATOR TYPE : For conditions of use where exposure to the substance is apparent,
consult an industrial hygienist. For emergencies or instances where
exposure levels are not known, use a full-face positive pressure, air
supplied respirator. WARNING: Air purifying respirators do not protect
workers in oxygen deficient atmospheres.
GLOVE TYPE: Wear PVC or Nitrile gloves.
EYE PROTECTION: Wear chemical goggles or face shield if there is a risk of splashing or eye
contact.
CLOTHING: Overalls and safety boots are recommended.
FLAMMABILITY
FIRE HAZARDS: Highly Flammable. Isolate from sources of heat, naked flames, sparks
and oxidising materials. Take precautions against discharges of static
electricity. Earth and bond all process equipment including tanks and
drums. Ensure ventilation is adequate to prevent build up of explosive
atmosphere. Refer to AS 1965 鈥? Safe working in a confined space for
more specific information on these subject.
SOURCES OF IGNITION ADVICE: Avoid all sources of ignition.
HAZCHEM CODE: 2Y
SAFE HANDLING INFORMATION
STORAGE AND TRANSPORT: Store in a cool dry area away from direct sunlight, heat, sparks and open
flames Take precautionary measures against static discharges. Keep
containers securely sealed. Store away from food items and incompatible
materials. Containers of this material may be hazardous when empty
since they retain product residues (vapours, liquid). Classified as
Dangerous goods Class 2.1, must be stored and transported in
accordance with appropriate state, federal and territory regulations.
SPILLS AND DISPOSAL: Wear personal protective clothing as recommended above. Remove all
ignition sources and ventilate area. Contain the spill with sand, earth or
inert material. Place in a suitable inert container for waste disposal. Do
not puncture or incinerate cans even when empty. Dispose of in
accordance with relevant local regulations. Do not empty in drains.
HAZARDS OF USE & STORAGE Highly flammable. Explosion hazard when exposed to heat or flame.
Closed container may rupture when exposed to heat greater than 50掳C.
LIST OF DANGEROUS Combustion products include oxides of carbon, acrylic monomers and
DATE OF ISSUE:23RD OCT 2003
MSDS NO:100-1- LK PAGE 3 of 4
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H 400g BUMPER & TRIM PAINT. (Aerosol)
COMPOSITION OR COMBUSTION aldehydes.
PRODUCTS
FIRE FIGHTING Fire 鈥揻ighters and others exposed to the products of combustion should
RECOMMENDATION wear self-contained breathing apparatus. Prevent spillage from entering
drains and watercourses. Cool fire exposed containers with water spray.
If safe to do so, remove containers from path of fire.
TYPES OF EXTINGUISHER / FIRE Use foam, dry chemical and carbon dioxide extinguishers Water spray or
FIGHTING AGENTS: fog to be used for large fires only.
REACTIVITY: None available.
OTHER INFORMATION
*Simple asphyxiants are gases which, when present in an atmosphere in high concentrations, lead to a
reduction of oxygen concentration by displacement or dilution. It is not appropriate to recommend an
exposure standard , rather it should be required that a sufficient oxygen concentration be maintained.
CONTACT POINT
Title: Technical Manager
Telephone Number: (03) 9792 5927 (Business hours 8-30 am-5.00pm Mon- Fri)
Emergency Telephone: After hours (03) 59742727
K&H pursues a policy of ongoing research & development aimed at product improvement and therefore may change the
formulation, specification & characteristics of the product without notice. It is user鈥檚 responsibility to verify the current
formulation, specification & characteristics of the product and to ascertain that it is suitable for an intended use or application.
All information contained in this Material Safety Data Sheet and the health, safety and environmental information are considered
to be accurate to the best of our knowledge as of the issue date specified above. However, no warranty or representation,
expressed or implied, is made as to the accuracy or completeness of the data and information contained in this data sheet.
Health and safety precautions and environmental advice noted in this data sheet may not be accurate for all individuals and/or
situations. It is the user鈥檚 obligation to evaluate and use this product safely and to comply with all applicable laws and regulations.
K&H Surface Technologies Pty Ltd accepts no responsibility for any injury, loss or damage, resulting from abnormal use of the
material, from any failure to adhere to recommendations, or from any hazards inherent in the nature of the material.
DATE OF ISSUE:23RD OCT 2003
MSDS NO:100-1- LK PAGE 4 of 4
|