ANCHOR-WELD VY4
COMMERCIAL SHEET VINYL
鈥? Roll the installation using a 25 - 35 kg roller in both directions
Fast Drying
immediately after laying. Then re-roll after 20 minutes.
鈥? Water-Based / Low Odour
鈥? High Early Bond Strength
Avoid heavy traffic for 24 hours after installation.
鈥? Plasticiser Migration Resistant
TYPICAL TECHNICAL DATA
DESCRIPTION
Base: Acrylic
Anchor-Weld VY4 is a water based trowelable adhesive for
Colour: Off white
bonding all types of Commercial Vinyl floor coverings.
Viscosity: Thick paste
Anchor-Weld VY4 is a hard-set adhesive which displays high
Solids: 72%
early bond strength. It is also specially formulated to be resistant
to plasticizer migration from vinyls, and will not show migration
PACKAGING
staining.
Available in 20L containers
PURPOSE FOR USE
CLEAN UP
Anchor-Weld VY4 is suitable for adhering backed and unbacked
Tools should be washed with water whilst adhesive is still wet.
Commercial vinyls to concrete, cement sheet or wooden
subfloors.
SAFETY PRECAUTIONS
Anchor-Weld VY4 is not dangerous to health or flammable. A
LIMITATIONS
Material Safety Data Sheet is available on request.
Because of the wide range of surfaces and floorings, a test of
any new combination should be conducted before using.
STORAGE & SHELF LIFE
Not recommended for: - Oily timber
Do not allow to freeze, store out of direct sunlight, keep in
- Oil tempered particle board
original containers tightly closed when not in use.
- External use.
Shelf life: minimum 12 months from date of manufacture if stored
PREPARATION
under cover between 5潞Cand 30潞C.
Ensure the surface is even, clean, dry and free from oil, dust or
flaking paint. A very porous or highly absorbent surface (e.g.
WARRANTY
concrete or wood) should be primed first with Anchor-Weld PR1
Your purchase of this product is subject to Anchor-Weld鈥檚
Primer.
standard terms and conditions of sale. The representation and
Ensure concrete subfloors are free from hydrostatic pressure,
recommendations regarding the products are based on tests
and test moisture content prior to priming or laying floor covering.
which we believe to be reliable. However, no guarantee of their
accuracy can be made because of the great range of field
APPLICATION & COVERAGE RATE
conditions and variations encountered in raw materials,
Refer to AS1884:1985 A Floor Coverings - Resilient Sheet and
manufacturing equipment and methods. Thus, the products are
Tiles - Laying and Maintenance Practices for further preparation
sold with a limited warranty only, and on the condition that
and laying details
purchasers will make their own tests to determine the suitability
of the product for their particular purposes.
Do not apply adhesive if temperature is below 10潞 C.
Under no circumstances will Anchor-Weld be liable to anyone
Spread VY4 evenly with a 螒V鈮? notch trowel.
except for replacement of the products or refund of the purchase
price. All other warranties whether express or implied, including
Smooth backed Vinyls:
without limitation, any warranty of merchantability of fitness of
Trowel: 1.6 mm V-notch (coverage approx. 5 m2/L)
purpose are expressly disclaimed unless prohibited by law or
given in writing by Anchor-Weld for a specific project.
Ideal Open time: 10 minutes
Textured backed Vinyls & PVC backed carpets:
TECHNICAL SUPPORT
Trowel: 2.4 mm V-notch (coverage approx. 3 m2/L)
Anchor-Weld Technical Services are available to pre-test any
Ideal Open time: 15 minutes
samples of substrate where the specifier / applicator may believe
doubts on application suitability exists.
Note: Open time is influenced by substrate porosity and
The tests will aid in determining the proper surface preparation
atmospheric conditions (i.e. Temperature, humidity and air
method. Following this procedure will remove many of the
movement).
unknown variables that affect field success. Please contact your
For non-absorbent subfloors the open time may be extended to
Anchor-Weld Distributor for further details.
allow a more aggressive instant bond to be made.
Note: If the vinyl is light weight and has a tendency to telegraph
ALL SALES ARE EXPRESSLY LIMITED TO THE TERMS
trowel marks, then the floor covering should be laid while the
AND CONDITIONS OF SALE OF ANCHOR-WELD
adhesive is wet, or a smooth square faced trowel can be used
AUSTRALIA.
with attention to the quantity applied.
Anchor-Weld VY4
All seams should be sealed with a vinyl seam sealer or welded
ITEM NO. STOCK SIZE
using a hot air welding tool
511811 Anchor-Weld VY4 20L
|