K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
ANTI RUST PROTECTANT
STATEMENT OF HAZARDOUS NATURE
Hazardous according to criteria of Worksafe Australia
COMPANY DETAILS
Company: K & H Surface Technologies Pty Ltd.
ACN: 004 510 918
Address: 105 South Gippsland Highway, Dandenong, Victoria, and Australia 3195.
Telephone: (03) 9792 5927. Fax: (03) 9794 5633.
Emergency Telephone Number: Business hours (03) 9792 5927. After hours (03) 59742727
Ask for the Technical Manager.
IDENTIFICATION
PRODUCT NAME: K&H ANTI RUST PROTECTANT
OTHER NAMES: Not available
MANUFACTURER鈥橲 PRODUCT CODE: ARP1T, ARP4, & ARP20
UN NUMBER 1263
HAZCHEM CODE: 3[Y]E
DANGEROUS GOODS CLASS/SUBSIDARY Class 3
RISK:
POISON SCHEDULE NUMBER: Not applicable
USE: Rust preventative coating.
PHYSICAL DESCRIPTION/PROPERTIES
APPEARANCE Thick brown liquid with strong hydrocarbon smell
VAPOUR PRESSURE (Pa or mmHg @ 20掳C): Not available
SPECIFIC GRAVITY: 0.8-0.9appr.
FLASH POINT (掳C): -6掳C
FLAMMABILITY LIMITS (%): LEL: 1.00%V/V: UEL: 7.50%V/V
SOLUBILITY IN WATER (g/L): Insoluble
None available
OTHER PROPERTIES:
INGREDIENTS
CHEMICAL ENTITY CAS No. PROPORTIONS
Solvent naphtha, petroleum, light aliphatic 64742-89-8 30-60%
Toluene 108-88-3 <10%
Kerosene 8008-20-6 <10%
Oxidised asphalt 64742-93-4 <10%
Nonhazardous ingredients - to 100%
MSDS NO:99-1- DATE OF ISSUE: 24th Aug 2004 PAGE 1 of 4
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
ANTI RUST PROTECTANT
HEALTH HAZARD INFORMATION
HEALTH EFFECTS
ACUTE
SWALLOWED Harmful if swallowed. Tends to break into a foam if the patient vomits.
Aspiration into lungs may lead to chemical pneumonitis.
EYE Mildly irritating to the eyes.
SKIN Mildly irritating to skin.
INHALED Inhalation may cause irritation to the respiratory system. Prolonged
exposure to vapours may cause somnolence, narcosis and coma.
CHRONIC Prolonged and repeated skin contact may cause dermatitis due to
defatting effect.
FIRST AID:
SWALLOWED If swallowed, give a glass of water. Do not induce vomiting. Lean victim
forward to reduce the risk of aspiration. Never give drink to unconscious
person. Seek medical advice. For further advice call Poisons Information
Centre.
EYE Hold eyes open & flood with water for at least 15 minutes. Seek
immediate medical advice.
SKIN Remove contaminated clothing and wash area with soap and water. Seek
medical aid if irritation occurs.
INHALED Remove person to fresh air. Lay patient down and keep warm. If
breathing is shallow, apply oxygen and seek medical aid.
FIRST AID FACILITIES Where bodily contact may occur, an eye wash station & safety shower or
supply of clean water should be readily available.
ADVICE TO DOCTOR Treat symptomatically.
PRECAUTIONS FOR USE
EXPOSURE STANDARDS None assigned for the mixture.
ENGINEERING CONTROLS Use in well ventilated area. Take precautionary measures against static
discharges. Where vapours or mists are generated, particularly in
enclosed areas, and natural ventilation is inadequate, a flameproof
exhaust ventilation system is required. Refer to AS1940- The storage and
handling of flammable and combustible liquids and AS 2430- Explosive
gas atmospheres for further information concerning ventilation
requirements.
PERSONAL PROTECTION
RESPIRATOR TYPE: For conditions of use where exposure to the substance is apparent,
consult an industrial hygienist. For emergencies or instances where
exposure levels are not known, use a full-face positive pressure, air
supplied respirator. WARNING: Air purifying respirators do not protect
workers in oxygen deficient atmospheres.
MSDS NO:99-1- DATE OF ISSUE: 24th Aug 2004 PAGE 2 of 4
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
ANTI RUST PROTECTANT
GLOVE TYPE: Wear PVC or Nitrile gloves.
EYE PROTECTION: Wear chemical goggles or face shield if there is a risk of splashing or eye
contact.
CLOTHING: Overalls and safety boots are recommended.
FLAMMABILITY
FIRE HAZARDS: Highly Flammable. Fire hazard when exposed to heat or flame. Vapours
can flow along surfaces to distant ignition source and flash back. Contact
with strong oxidizers may cause fire. Sensitive to static discharge.
SOURCES OF IGNITION ADVICE: Avoid all sources of ignition.
HAZCHEM CODE: 3 [Y]E
SAFE HANDLING INFORMATION
STORAGE AND TRANSPORT: Store in a cool dry area away from direct sunlight, heat, sparks and open
flames Take precautionary measures against static discharges. Keep
containers securely sealed. Store away from food items and incompatible
materials. Containers of this material may be hazardous when empty
since they retain product residues (vapours, liquid). Classified as
Dangerous goods Class 3, must be stored and transported in accordance
with appropriate state, federal and territory regulations.
SPILLS AND DISPOSAL: Wear personal protective clothing as recommended above. Remove all
ignition sources and ventilate area. Contain the spill with sand, earth or
inert material. Place in a suitable inert container for waste disposal.
Dispose of in accordance with relevant local regulations. Do not empty
in drains.
HAZARDS OF USE & STORAGE Highly Flammable. Fire hazard when exposed to heat or flame. Vapours
can flow along surfaces to distant ignition source and flash back. Contact
with strong oxidizers may cause fire. Sensitive to static discharge.
LIST OF DANGEROUS Carbon dioxide and carbon monoxide may form when heated to
COMPOSITION OR COMBUSTION decomposition.
PRODUCTS
FIRE FIGHTING Fire 鈥揻ighters and others exposed to the products of combustion should
RECOMMENDATION wear self-contained breathing apparatus. Prevent spillage from entering
drains and watercourses. Cool fire exposed containers with water spray.
If safe to do so, remove containers from path of fire.
TYPES OF EXTINGUISHER / FIRE Use foam, dry chemical and carbon dioxide extinguishers Water spray or
FIGHTING AGENTS: fog to be used for large fires only.
REACTIVITY: None available.
OTHER INFORMATION
None available
MSDS NO:99-1- DATE OF ISSUE: 24th Aug 2004 PAGE 3 of 4
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
ANTI RUST PROTECTANT
CONTACT POINT
Title: Technical Manager
Telephone Number: (03) 9792 5927 (Business hours 8-30 am-5.00pm Mon- Fri)
Emergency Telephone: After hours (03) 59742727
K&H pursues a policy of ongoing research & development aimed at product improvement and therefore may change the
formulation, specification & characteristics of the product without notice. It is user鈥檚 responsibility to verify the current
formulation, specification & characteristics of the product and to ascertain that it is suitable for an intended use or application.
All information contained in this Material Safety Data Sheet and the health, safety and environmental information are considered
to be accurate to the best of our knowledge as of the issue date specified above. However, no warranty or representation,
expressed or implied, is made as to the accuracy or completeness of the data and information contained in this data sheet.
Health and safety precautions and environmental advice noted in this data sheet may not be accurate for all individuals and/or
situations. It is the user鈥檚 obligation to evaluate and use this product safely and to comply with all applicable laws and regulations.
K&H Surface Technologies Pty Ltd accepts no responsibility for any injury, loss or damage, resulting from abnormal use of the
material, from any failure to adhere to recommendations, or from any hazards inherent in the nature of the material.
MSDS NO:99-1- DATE OF ISSUE: 24th Aug 2004 PAGE 4 of 4
|