Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

763-69-9
123-86-4
108-88-3
78-93-3
64742-89-8
1330-20-7
100-41-4

File Name: keystone-auto_com---msds-key83.asp
                                                                                                    DATE: 07/18/00



KEY82 Extra Slow Urethane Reducer


MATERIAL SAFETY DATA SHEET


THIS MSDS COMPLIES WITH 29 CFR 1910.1200 (HAZARD COMMUNICATION STANDARD)
IMPORTANT: Read this MSDS before handling and disposing of this product.
Pass this information on to employees, customers, & users of this product.


SECTION 1. CHEMICAL PRODUCTS & COMPANY IDENTIFICATION / HAZARD RATINGS
PRODUCT IDENTITY: Blend #2013 KEY83 Extra Slow Urethane Reducer HEALTH RATINGS:
COMPANY IDENTITY: Keystone Automotive Industries HEALTH (NFPA) = 2
COMPANY ADDRESS: 700 East Bonita Avenue HEALTH (HMIS) = 2
Pomona, CA 91767 FLAMMABILITY = 3
COMPANY PHONE: 1-800-772-5557 REACTIVITY = 0
CHEMTREC PHONE: 1-800-424-9300


SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS

CONTAINS: 35-40% ETHYL-3-ETHOXY PROPIONATE (763-69-9)
20-30% N-BUTYL ACETATE (123-86-4)[204-658-1]
5-10% TOLUENE (108-88-3) [203-625-9]
5-10% METHYL ETHYL KETONE (78-93-3)[201-159-0]
5-10% LIGHT ALIPHATIC SOLVENT NAPHTHA (*64742-89-8)
0-5% MIXED XYLENES (1330-20-7) [215-535-7]
0-5% ETHYLBENZENE (100-41-4) [202-849-4]

SECTION 3. HAZARDS IDENTIFICATION

RISK STATEMENTS:
R11 Highly Flammable.
R18 In use, may form flammable/explosive vapor-air mixture.
R65 Harmful: may cause lung damage if swallowed.
R36/37/38 Irritating to eyes, respiratory system and skin.
R20/65 Harmful by inhalation, may cause lung damage if swallowed.

SAFETY STATEMENTS:
S9 Keep container in a well-ventilated place.
S16 Keep away from sources of ignition. No smoking.
S29 Do not empty into drains.
S45 In case of accident, or if you feel unwell, seek medical advice immediately. (Show
the label where possible).
S53 Avoid exposure 鈥? Obtain special instructions before use.
S24/25 Avoid contact with skin and eyes.

SECTION 4. FIRST AID MEASURES

EYE CONTACT:

REV. 03\05 Page 1 of 6
For eyes, flush with plenty of water for 15 minutes & get medical attention.

SKIN CONTACT:
In case of contact with skin immediately remove contaminated clothing. Wash thoroughly with soap & water. Wash
contaminated clothing before reuse.

INHALATION:
After high vapor exposure, remove to fresh air. If breathing is difficult, give oxygen. If breathing has stopped give artificial
respiration.

SWALLOWING:
If swallowed, CALL A PHYSICIAN IMMEDIATELY! Do NOT induce vomiting. Have patient lie down & keep warm.
Vomiting may lead to pneumonitis, which may be fatal.

SECTION 5. FIRE FIGHTING MEASURES

EXTINGUISHING MEDIA:
NFPA Class B extinguishers [Carbon Dioxide or Foam] for Class I B liquid fires.

SPECIAL FIRE FIGHTING PROCEDURES:
Water spray may be ineffective on fire but can protect fire fighters & cool closed containers. Use fog nozzles if water is
used. Do not enter confined fire-space without full bunker gear. (Helmet with face shield, bunker coats, gloves & rubber
boots). Use NIOSH approved positive-pressure self-contained breathing apparatus.

UNUSUAL EXPLOSION AND FIRE PROCEDURES:
HIGHLY FLAMMABLE!! VAPORS CAN CAUSE FLASH FIRE
Keep container tightly closed.
Isolate from oxidizers, heat, sparks, electric equipment and open flame.
Closed containers may explode if exposed to extreme heat.
Applying to hot surfaces requires special precautions.
Empty container very hazardous! Continue all label precautions!

SECTION 6. ACCIDENTAL RELEASE MEASURES

CONTAINMENT TECHNIQUES:
Stop spill at source. Dike area & contain.

CLEAN-UP PROCEDURES:
Clean up remainder with absorbent materials. Mop up & dispose of. Persons without proper protection should be kept
from area until cleaned up.

SECTION 7. HANDLING AND STORAGE

HANDLING:
Isolate from oxidizers, heat, sparks, electric equipment & open flame. Use only with adequate ventilation. Avoid breathing
of vapor or spray mist. Avoid contact with skin & eyes. Wear OSHA Standard goggles or face shield. Consult Safety
Equipment Supplier. Wear gloves, apron & footwear impervious to this material. Wash clothing before reuse. Avoid free
fall of liquid. Ground containers when transferring. Do not flame cut, saw, drill, braze, or weld. Empty container very
hazardous! Continue all label precautions!

STORAGE:
Do not store above 49 C / 120 F. Store large amounts in structures made for OSHA Class I B liquids. Keep container
tightly closed & upright when not in use to prevent leakage.

OSHA Class I B liquids.

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

EXPOSURE CONTROLS:

REV. 03\05 Page 2 of 6
Ventilate to keep vapors of this material below 40 ppm. If over TLV, in accordance with 29 CFR 1910.134, use NIOSH
approved positive-pressure self-contained breathing apparatus. Consult Safety Equipment Supplier. Use explosion-proof
equipment.

VENTILATION:
LOCAL EXHAUST: Necessary
MECHANICAL (GENERAL): Acceptable
SPECIAL: None
OTHER: None

PERSONAL PROTECTIONS:
Wear OSHA Standard goggles or face shield. Consult Safety Equipment Supplier. Wear gloves, apron & footwear
impervious to this material. Wash clothing before reuse.

WORK & HYGIENIC PRACTICES:
Provide readily accessible eye wash stations & safety showers. Wash at end of each workshift & before eating, smoking
or using the toilet. Promptly remove clothing that becomes contaminated. Destroy contaminated leather articles. Launder
or discard contaminated clothing.

SECTION 9. PHYSICAL DATA
APPEARANCE: Liquid, Water-White
ODOR: Ketone
BOILING RANGE: 88 133 166 C / 192 272 331 F
AUTO IGNITION TEMPERATURE: 287 C / 550 F (Lowest Component)
LOWER FLAMMABLE LIMIT IN AIR (% by vol): 1.3
FLASH POINT (TEST METHOD): -2 C / 28 F (TCC) (Lowest component)
FLAMMABILITY CLASSIFICATION: Class I B
GRAVITY @ 60 F :
API: 28.9
SPECIFIC GRAVITY (Water=1): .882
POUNDS/GALLON: 7.349
VOC鈥橲 (>0.44 Lbs./sq. Inch): 60.5 Vol. % / 533.6 g/L / 4.444 Lbs/Gal
TOTAL VOC鈥橲 (TVOC): 100.0 Vol. % / 882.3 g/L / 7.349 Lbs/Gal
NONEXEMPT VOC鈥橲 (CVOC): 100.0 Vol. % / 882.3 g/L / 7.349 Lbs/Gal
HAZARDOUS AIR POLLUTANTS (HAPS): 23.9 Wt. % / 211.0 g/L / 1.757 Lbs/Gal
VAPOR PRESSURE (mm of Hg) @ 20 C: 17.9
NONEXEMPT VOC PARTIAL PRESSURE (mm of Hg @ 20 C): 17.9
VAPOR DENSITY (air=1): 4.1
WATER ABSORPTION: Moderate
REFRACTIVE INDEX: 1.430

SECTION 10. STABILITY & REACTIVITY
STABILITY:
Stable

CONDITIONS TO AVOID:
Isolate from oxidizers, heat, sparks, electric equipment & open flame.

MATERIALS TO AVOID:
Isolate from strong oxidizers such as permanganates, chromates & peroxides.

HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon Monoxide, Carbon Dioxide from burning.

HAZARDOUS POLYMERIZATION:
Will not occur.
SECTION 11. TOXICOLOGICAL INFORMATION

MATERIAL CAS # TWA (OSHA ) TLV (ACGIH) HAP
Ethyl-3-Ethoxypropionate 763-69-9 50 ppm 50 ppm No
REV. 03\05 Page 3 of 6
n-Butyl Acetate 123-86-4 150 ppm 150 ppm No
Toluene 108-88-3 200 ppm 50 ppm A4 Yes
Methyl Ethyl Ketone 78-93-3 200 ppm 200 ppm Yes
Light Aliphatic Solvent Naphtha *64742-89-8 500 ppm 300 ppm No
Mixed Xylenes 1330-20-7 100 ppm 100 ppm A4 Yes
Ethylbenzene 100-41-4 100 ppm 100 ppm A3 Yes

SECTION 11. TOXICOLOGICAL INFORMATION (CONTINUED)

In addition to EPA Hazardous Air Pollutants showing 'Yes' under 鈥淗AP鈥? above, using manufacturers' data, based on EPA
Method 311, the following EPA Hazardous Air Pollutants may be present in trace amounts (less than 0.1%): Benzene,
Cumene

MATERIAL CAS # CEILING STEL
(OSHA/ACGIH)
n-Butyl Acetate 123-86-4 None Known 200 ppm
Methyl Ethyl Ketone 78-93-3 None Known 300 ppm
Light Aliphatic Solvent Naphtha *64742-89-8 None Known 5.3E3 ppm
Mixed Xylenes 1330-20-7 None Known 150 ppm
Ethylbenzene 100-41-4 None Known 125 ppm

ACUTE HAZARDS

EYE & SKIN CONTACT:
Primary irritation to skin - defatting, dermatitis.
Absorption thru skin increases exposure.
Primary irritation to eyes 鈥? redness, tearing, blurred vision.
Liquid can cause eye irritation. Wash thoroughly after handling.

INHALATION:
Anesthetic. Irritates respiratory tract. Acute overexposure can cause serious nervous system depression. Vapor harmful.
Breathing vapor can cause irritation. Acute overexposure can cause damage to kidneys, blood, nerves, liver & lungs.

SWALLOWING:
Harmful or fatal if swallowed.
Swallowing can cause abdominal irritation, nausea, vomiting & diarrhea.

SUBCHRONIC HAZARDS / CONDITIONS AGGRAVATED:

CONDITIONS AGGRAVATED:
Persons with severe skin, liver or kidney problems should avoid use.

CHRONIC HAZARDS

CANCER, REPRODUCTIVE & OTHER CHRONIC HAZARDS:
Potential Cancer Hazard based on tests with laboratory animals using Ethylbenzene.
Leukemia has been reported in humans from Benzene. This product may contain less than 42 ppm of Benzene. Not
considered hazardous in such low concentrations. Absorption thru skin may be harmful. Studies with laboratory animals
indicate this product can cause damage to fetus.

SECTION 12. ECOLOGICAL INFORMATION
MAMMALIAN INFORMATION:
MATERIAL CAS# LOWEST KNOWN LETHAL DOSE DATA
LOWEST KNOWN LD50 (ORAL)
Toluene 108-88-3 3000.0 mg/kg (Rats)
LOWEST KNOWN LC50 (VAPORS)
n-Butyl Acetate 123-86-4 2000 ppm (Rats)

AQUATIC ANIMAL INFORMATION:
The most sensitive known marine group to any component of this product is:
REV. 03\05 Page 4 of 6
Fish .032 ppm or mg/L (96 hour exposure). Keep out of sewers and natural water supplies.


MOBILITY:
This material is a mobile liquid.

DEGRADABILITY:
This product is partially biodegradable.

ACCUMULATION:
This product does not accumulate or biomagnify in the environment.

SECTION 13. DISPOSAL CONSIDERATIONS

Recycle / dispose of observing national, regional, state, provincial and local health, safety & pollution laws. If questions
exist, contact the appropriate agencies.

SECTION 14. TRANSPORT INFORMATION

DOT SHIPPING NAME: RQ, Paint Related Material
(Contains: n-Butyl Acetate, Mixed Xylenes) 3, UN1263, PG-II
DRUM LABEL: (FLAMMABLE LIQUID)
IATA / ICAO: RQ, Paint Related Material
(Contains: n-Butyl Acetate, Mixed Xylenes) 3, UN1263, PG-II
IMO / IMDG: RQ, Paint Related Material
(Contains: n-Butyl Acetate, Mixed Xylenes) 3, UN1263, PG-II
EMERGENCY RESPONSE GUIDEBOOK NUMBER: 127

SECTION 15. REGULATORY INFORMATION

STATE REGULATIONS:
CALIFORNIA PROPOSITION 65: This product contains the following chemical known to the State of California to cause
reproductive toxicity: Ethylbenzene, Toluene

SECTION 15. REGULATORY INFORMATION (CONTINUED)
EPA REGULATIONS:
SARA SECTION 311/312 HAZARDS: Acute Health, Fire
All components of this product are on the TSCA list.
SARA Title III Section 313 Supplier Notification
This product contains the indicated <*> toxic chemicals subject to the reporting requirements of Section 313 of the
Emergency Planning & Community Right-To-Know Act of 1986 & of 40 CFR 372. This information must be included in all
MSDSs that are copied and distributed for this material.

SARA TITLE III INGREDIENTS
CAS# WT.% (REG. SECTION) RQ (LBS)
*Toluene 108-88-3 9 (311, 312, 313, RCRA) 1000
*Methyl Ethyl Ketone 78-93-3 9 (311, 312, 313, RCRA) 5000
*Mixed Xylenes 1330-20-7 <4 (311, 312, 313, RCRA) None
*Ethylbenzene 100-41-4 <1 (311, 312, 313, RCRA) None

IF > 10959 POUNDS OF THIS PRODUCT IS IN ONE CONTAINER THE 鈥淩Q鈥? OF TOLUENE IS EXCEEDED.

INTERNATIONAL REGULATIONS:
The components of this product are listed on the chemical inventories of the following countries:
Australia, Canada, Europe (EINECS), Japan, Korea, United Kingdom.

SECTION 16. OTHER INFORMATION
HAZARD RATINGS:
HEALTH (NFPA): 2
HEALTH (HMIS): 2
REV. 03\05 Page 5 of 6
FLAMMABILITY: 3
REACTIVITY: 0

This information is intended solely for the use of individuals trained in the NFPA & HMIS hazard rating systems.

EMPLOYEE TRAINING:
Employees should be made aware of all hazards of this material (as stated in this MSDS) before handling it.

NOTICE

The supplier disclaims all expressed or implied warranties of merchantability or fitness for a specific use, with respect to
the product or the information provided herein, except for conformation to contracted specifications. All information
appearing herein is based upon data obtained from manufacturers and/or recognized technical sources. While the
information is believed to be accurate, we make no representations as to its accuracy or sufficiency. Conditions of use are
beyond our control, and therefore users are responsible for verifying the data under their own operating conditions to
determine whether the product is suitable for their particular purposes and they assume all risks of their use, handling,
and disposal of the product. Users also assume all risks in regards to the publication or use of, or reliance upon,
information contained herein. This information relates only to the product designated herein, and does not relate to its use
in combination with any other material or process.




REV. 03\05 Page 6 of 6

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
imiproducts_com---tb-wrrs-coatings.asp N/A
kevmor_com_au---anchorweld_ca1_data.asp N/A
kevmor_com_au---anchorweld_ca6_data.asp N/A
kevmor_com_au---anchorweld_ca7_data.asp N/A
kevmor_com_au---anchorweld_ca9.asp N/A
kevmor_com_au---anchorweld_ss1.asp 108-88-3
kevmor_com_au---anchorweld_uf1_data.asp N/A
kevmor_com_au---anchorweld_vy4_data.asp N/A
kevmor_com_au---anchorweld_vy9.asp N/A
kevmor_com_au---bostik_1492_tds.asp N/A
kevmor_com_au---carson_moulding_latex_msds.asp 7664-41-7
kevmor_com_au---chemwatch_msds_5041-48_granirapid_b.asp 61789-96-6 7732-18-5
kevmor_com_au---chemwatch_msds_5042-14_ultrabond_eco-300.asp 7732-18-5
kevmor_com_au---chemwatch_msds_5042-15_ultrabond_eco-800.asp 7732-18-5
kevmor_com_au---chemwatch_msds_5042-19_ultrabond_eco-185.asp 7732-18-5
kevmor_com_au---chemwatch_msds_5042-31_isolastic.asp 7732-18-5
kevmor_com_au---chemwatch_msds_5042-45_plano3.asp N/A
kevmor_com_au---chemwatch_msds_5044-28_kerapoxy_component_a.asp N/A
kevmor_com_au---chemwatch_msds_5044-52_triblock_component_a.asp N/A
kevmor_com_au---chemwatch_msds_5046-26_planicrete.asp 10043-52-4
kevmor_com_au---chemwatch_msds_5072-86_ultrabond_eco_90.asp N/A
kevmor_com_au---chemwatch_msds_6610-88.pdf_tixobond_fine_s_1_disc_2007.asp N/A
kevmor_com_au---eco350_td.asp N/A
kevmor_com_au---eco420_td.asp N/A
kevmor_com_au---eco840_td.asp N/A
kevmor_com_au---kerabond_plus_grey_chemwatch_msds_5128-29.asp N/A
kevmor_com_au---mapelastic_smart_a_5130-11_msds.asp N/A
kevmor_com_au---rla_6135_tds001.asp N/A
kevmor_com_au---rla_6345_tds001.asp N/A
kevmor_com_au---ultraplan_eco_msds.asp N/A
keystone-auto_com---msds-key747.asp 123-86-4 64742-95-6 95-63-6 4098-71-9 100-41-4 1330-20-7 822-06-0
keystone-auto_com---msds-key785.asp 110-43-0 123-86-4 64742-95-6 95-63-6 4098-71-9 100-41-4 1330-20-7 822-06-0
keystone-auto_com---msds-key801.asp 108-88-3 123-86-4 1330-20-7 108-65-6 100-41-4 822-06-0
keystone-auto_com---msds-key83.asp 763-69-9 123-86-4 108-88-3 78-93-3 64742-89-8 1330-20-7 100-41-4
keystone-auto_com---msds-key8883.asp 108-88-3 108-65-6 123-86-4 1330-20-7 100-41-4 822-06-0
keystone-auto_com---msds-key90.asp 64742-89-8 67-63-0 1330-20-7 67-56-1
keystone-auto_com---msds-key907.asp 74-98-6 106-97-8 108-88-3 100-41-4 01330-20-7 67-64-1 14807-96-6 1333-86-4
keystone-auto_com---msds-key92.asp 78-83-1 64742-89-8
keystone-auto_com---msds-key990.asp 108-88-3 67-64-1 115-10-6
keystone-auto_com---msds-key991.asp 108-88-3 67-64-1 115-10-6
khst_com_au---494_aerosol__all_purpose_spray_enamel_255gm-msds.asp 108-88-3 7429-90-5 68476-85-7
khst_com_au---a500._acetone-_msds.asp 67-64-1
khst_com_au---ab938ab958ab979ab994.asp 108-88-3 141-78-6 74-98-6 106-97-8
khst_com_au---adp1._plastic_adhesion_primer-_msds.asp 108-88-3
khst_com_au---ad_aerosol_k&h_disc_drum_caliper_400g-msds.asp 108-88-3 75-09-2 64742-95-6 74-98-6
khst_com_au---aerosol_k&h_chrome_metallic_finish400gaerosol-msds.asp 108-88-3 64742-95-6 74-98-6 106-97-8
khst_com_au---ae_aerosol_k&h_engine_enamel_400g-msds.asp 108-88-3 75-09-2 64742-95-6
khst_com_au---ah_aerosol_k&h_heat_proof_400g_-msds.asp 108-88-3 64-17-5 1330-20-7 68476-85-7
khst_com_au---arp1t.4.20._200_msds.asp 64742-89-8 108-88-3 8008-20-6 64742-93-4
khst_com_au---asp400._aerosol_spray_putty-_msds.asp 115-10-6 108-88-3 108-10-1 141-78-6 71-36-3 108-38-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC