90
technical data sheet
BOSTIK 1492
PREMIUM HIGH HEAT RESISTANT POST FORMING
GRADE ADHESIVE
DESCRIPTION COVERAGE:
Bostik 1492 is a premium quality, high solids, sprayable Up to 10m虏 per litre on one surface
polychloroprene contact adhesive, featuring high early
green strength coupled with an excellent working tack life. PREPARATION
Bostik 1492 is specially formulated to have high heat
Bostik 1492 is applied with suction feed or pressure pot
resistance, uninterrupted spraying and the ability to be
equipment. Prior to application ensure all surfaces are
used at temperatures from 10-35潞C. Bostik 1492 also
clean, dry and free of oil and grease.
gives excellent adhesion to a wide range of materials
including many natural and synthetic rubbers, rigid and
APPLICATION
flexible polyurethane foams and other similar materials.
Apply an even film of adhesive to both surfaces to cover at
least 80% of area. Allow to dry for approximately 10-15
RECOMMENDED USES minutes (depending on weather conditions) or until they
Specifically designed for easy spraying without can be touched with the knuckles without any adhesive
cobwebbing, especially where automatic spraying being transferred. Align the surfaces accurately, then join
equipment is employed, Bostik 1492 is suitable for use surfaces (take care not to entrap air) with as much
with all current post forming equipment (heated bar or infra pressure as possible.
red bank heaters). Bostik 1492 is also used in boat
interior applications where laminating or upholstery In some cases, very porous substrates may require 2
trimming work is required. coats. Bonding of materials should occur within 45
minutes - if left longer, a light spray coat should be
Note: Bostik 1492 has excellent atomisation that reapplied to reactivate the surfaces.
generates better than normal spray patterns and delivers
more coverage per square metre of adhesive compared to
PRECAUTION
other sprayable contacts.
Do not use on copper, expanded polystyrene foam,
unbacked PVC or untreated polyethylene or polypropylene
FEATURES & BENEFITS plastics. Not recommended for exterior use.
鈥? n-Hexane Safe
鈥? High temperature resistance
P.A.T.S (Pretested Adhesion To Substrate)
鈥? High early green strength
Programme
鈥? Excellent atomisation
Bostik offer a service in which a program has been
Bostik 1492 is fire rated 0.0.0.0/1 to AS1530.3-1989.
established to eliminate potential field problems by pre-
testing Bostik adhesives with samples of building materials
TYPICAL TECHNICAL DATA to which the adhesive will be applied. This service is
Type: Polychloroprene rubber / Resin available on large projects where pre-application testing
Colour: Red and Clear will aid in determining the proper surface preparation
Petroleum spirit, aromatic hydrocarbon method to achieve optimum adhesion. Consult a Bostik
Solvent: and ketone mixture representative for further information.
Viscosity: Approx. 270 cps (Brookfield) BTM-V001
Solids: Approx. 20% SAFETY PRECAUTIONS
S.G.: 0.83 A Material Safety Data Sheet is available on request.
Flash Point: Less than 0潞C Store away from heat sources and naked flames, under
In excess of 150潞C - when tested to AS cover and well ventilated. The solvents are highly
Temperature 2131-1978 Heat Resistance Test flammable.
Resistance: Appendix C method
Heat resistance may be increased further
CLEAN-UP
by the addition of Bostik 9101 Curing
Note:
Clean up with Bostik 9913 Solvent. Thinning is not
Agent. (Contact Bostik)
recommended. Spraying equipment must be thoroughly
cleaned at the end of each day to ensure satisfactory and
PACKAGING uninterrupted working.
Available in 20L and 200L containers
STORAGE
Minimum of 12 months from date of manufacture if stored
under cover between 5潞C and 30潞C.
BOSTIK 1492 ADHSEIVE
ITEM NO. STOCK SIZE
043672 BOSTIK 1492 ADHESIVE CLEAR 20L
043680 BOSTIK 1492 ADHESIVE CLEAR 200L
043699 BOSTIK 1492 ADHESIVE RED 20L
043702 BOSTIK 1492 ADHESIVE RED 200L
BOSTIK 9913 SOLVENT
ITEM NO. STOCK SIZE
045454 BOSTIK 9913 4L
045462 BOSTIK 9913 20L
The representations and recommendations regarding the products are based on tests which we believe to be reliable. However, no guarantee of their
accuracy can be made because of the great range of field conditions and variations encountered in raw materials, manufacturing equipment and
methods. Thus, the products are sold with a limited warranty only, and on the condition that purchasers will make their own tests to determine the
suitability of the product for their particular purposes. Under no circumstances will Bostik Australia Pty Ltd be liable to anyone except for replacement of
the products or refund of the purchase price.
ALL SALES ARE EXPRESSLY LIMITED TO THE TERMS AND CONDITIONS OF SALE OF BOSTIK AUSTRALIA PTY LTD
FOR FURTHER INFORMATION
BOSTIK BOSTIK BOSTIK BOSTIK
AUSTRALIA PTY LTD NZ LIMITED SINGAPORE PTE LTD (MALAYSIA) SDN BHD
Phone: +61-3-9279 9333 Phone: +64-4-567 5119 Phone: +65-6863 4088 Phone: +606 764 3246
Fax: +61-3-9279 9240 Fax: +64-4-567-5412 Fax: +65-6863 4077 Fax: +606 764 3248
SYDNEY ADELAIDE PERTH BRISBANE Product: Bostik 1492 Adhesive
Phone: 02 8825 3488 Phone: 08 8244 0511 Phone: 08 9331 7666 Phone: 07 3260 2206 Issue Date: February 2002
Issue No: 2
Fax: 02 8825 3411 Fax: 08 8244 0522 Fax: 08 9331 7677 Fax: 07 3260 2123 Division: Industrial
(ABN 79 003 893 838) Total Pages: 2
.
|