Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: kevmor_com_au---anchorweld_ca9.asp
Material Safety Data Sheet

NON-Hazardous Substance, NON-Dangerous Goods

1. MATERIAL AND SUPPLY COMPANY IDENTIFICATION


Anchor-WeldTM CA9
Product name:

Synonyms: Mancode
Anchor-WeldTM CA9, 20 Litre 511781

Recommended use:

Bostik Australia Pty Ltd
Supplier:
79 003 893 838
ABN:
51-71 High Street
Street Address:
Thomastown VIC 3074
Australia
+613 9279-9333
Telephone:
+613 9279-9342
Facsimile:

Emergency telephone number: 1800 033 111


2. HAZARDS IDENTIFICATION

Based on available information, this material is not classified as hazardous according to criteria of NOHSC
Australia.

Not classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for
transport by Road and Rail.

Poisons Schedule (Aust): Not applicable


3. COMPOSITION INFORMATION

CHEMICAL ENTITY CAS NO. PROPORTION

Non-hazardous ingredients - 100%
________
100%


4. FIRST AID MEASURES

If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New Zealand
0800 764 766).

Inhalation: Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and
loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest
until fully recovered. Seek medical advice if effects persist.

Skin contact: If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with
running water. If swelling, redness, blistering or irritation occurs seek medical assistance.


Product name: Anchor-WeldTM CA9 Substance Key: BOS0015101
Issued: 8 February 2005 Version: 1.0 Page: 1 of 5
Material Safety Data Sheet

Eye contact: If in eyes wash out immediately with water. In all cases of eye contamination it is a sensible
precaution to seek medical advice.

Ingestion: Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink.
Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek
medical advice.

Notes to physician: Treat symptomatically.


5. FIRE-FIGHTING MEASURES

Specific hazards: Non-combustible material.

Fire fighting further advice: Not combustible, however following evaporation of aqueous component
residual material can burn if ignited. On burning may emit toxic fumes. Fire fighters to wear self-contained
breathing apparatus and suitable protective clothing if risk of exposure to vapour or products of combustion.

Hazchem Code: Not applicable.

Suitable extinguishing media: Not combustible, however, if material is involved in a fire use water fog (or if
unavailable fine water spray), foam, dry agent (carbon dioxide, dry chemical powder).


6. ACCIDENTAL RELEASE MEASURES

SMALL SPILLS
Wear protective equipment to prevent skin and eye contamination. Wipe up with absorbent (clean rag or
paper towels). Collect and seal in properly labelled containers or drums for disposal.

LARGE SPILLS
Slippery when spilt. Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and
eye contamination and the inhalation of vapours. Work up wind or increase ventilation. Contain - prevent
run off into drains and waterways. Use absorbent (soil, sand or other inert material). Collect and seal in
properly labelled containers or drums for disposal.

Dangerous Goods 鈥? Initial Emergency Response Guide No: Not applicable.


7. HANDLING AND STORAGE

Handling: Avoid eye contact and repeated or prolonged skin contact.

Storage: Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from incompatible
materials described in Section 10. Keep containers closed when not in use - check regularly for leaks.


8. EXPOSURE CONTROLS / PERSONAL PROTECTION

National occupational exposure limits:
No value assigned for this specific material by the National Occupational Health and Safety Commission
(NOHSC Australia).

Biological Limit Values: As per the 鈥淣ational Model Regulations for the Control of Workplace Hazardous
Substances [NOHSC: 1005 (1994)]鈥? the ingredients in this material do not have a Biological Limit Allocated.
Product name: Anchor-WeldTM CA9 Substance Key: BOS0015101
Issued: 8 February 2005 Version: 1.0 Page: 2 of 5
Material Safety Data Sheet

Engineering measures: Natural ventilation should be adequate under normal use conditions.

Personal protection equipment: OVERALLS, SAFETY SHOES, SAFETY GLASSES, GLOVES.

Wear overalls, safety glasses and impervious gloves. Available information suggests that gloves made from
nitrile rubber should be suitable for intermittent contact. However, due to variations in glove construction
and local conditions, the user should make a final assessment. Always wash hands before smoking, eating,
drinking or using the toilet. Wash contaminated clothing and other protective equipment before storing or re-
using.


9. PHYSICAL AND CHEMICAL PROPERTIES

Form / Colour / Odour: Thick, white liquid with faint aromatic odour.

Solubility: Miscible with water
Specific Gravity (20 掳C): 1.05-1.10
Relative Vapour Density (air=1): N Av
Vapour Pressure (20 掳C): N Av
Flash Point (掳C): N App
Flammability Limits (%): N App
Autoignition Temperature (掳C): N App
Melting Point/Range (掳C): N Av
Boiling Point/Range (掳C): N Av
pH: 4-6

(Typical values only - consult specification sheet)
N Av = Not available N App = Not applicable


10. STABILITY AND REACTIVITY

Chemical stability: This material is thermally stable when stored and used as directed.

Conditions to avoid: No information available.

Incompatible Materials: No information available.

Hazardous decomposition products: Oxides of carbon and nitrogen, smoke and other toxic fumes.

Hazardous reactions: No information available.


11. TOXICOLOGICAL INFORMATION

No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and
the product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs
are:

Acute Effects

Inhalation: Material may be irritant to mucous membranes and respiratory tract.

Skin contact: Contact with skin may result in irritation.


Product name: Anchor-WeldTM CA9 Substance Key: BOS0015101
Issued: 8 February 2005 Version: 1.0 Page: 3 of 5
Material Safety Data Sheet

Eye contact: May be an eye irritant.

Ingestion: Swallowing can result in nausea and vomiting.

Long Term Effects: No information available for product.

Acute toxicity / Chronic toxicity
No LD50 data available for the product.


12. ECOLOGICAL INFORMATION

Avoid contaminating waterways.

Ecotoxicity: No information available.

Persistence and degradability: No information available.

Mobility: No information available.


13. DISPOSAL CONSIDERATIONS

Refer to State/Territory Land Waste Management Authority.


14. TRANSPORT INFORMATION

ROAD AND RAIL TRANSPORT
Not classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for
transport by Road and Rail.

MARINE TRANSPORT
Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code
(IMDG Code) for transport by sea.

AIR TRANSPORT
Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA)
Dangerous Goods Regulations for transport by air.


15. REGULATORY INFORMATION

Poisons Schedule (Aust): Not applicable

All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS).


16. OTHER INFORMATION

Literary reference

This Material Safety Data Sheet has been prepared by Chemical Data Services Pty Ltd on behalf of its
client.
Product name: Anchor-WeldTM CA9 Substance Key: BOS0015101
Issued: 8 February 2005 Version: 1.0 Page: 4 of 5
Material Safety Data Sheet

Reason(s) For Issue: First Issue

Material Safety Data Sheets are updated frequently. Please ensure that you have a current copy.

This MSDS summarises at the date of issue our best knowledge of the health and safety hazard information
of the product, and in particular how to safely handle and use the product in the workplace. Since Bostik
Australia Pty Ltd cannot anticipate or control the conditions under which the product may be used, each user
must, prior to usage, review this MSDS in the context of how the user intends to handle and use the product
in the workplace.

If clarification or further information is needed to ensure that an appropriate assessment can be made, the
user should contact this company.

Our responsibility for product as sold is subject to our standard terms and conditions, a copy of which is sent
to our customers and is also available upon request.




Product name: Anchor-WeldTM CA9 Substance Key: BOS0015101
Issued: 8 February 2005 Version: 1.0 Page: 5 of 5

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
imiproducts_com---tb-wrrs-coatings.asp N/A
kevmor_com_au---anchorweld_ca1_data.asp N/A
kevmor_com_au---anchorweld_ca6_data.asp N/A
kevmor_com_au---anchorweld_ca7_data.asp N/A
kevmor_com_au---anchorweld_ca9.asp N/A
kevmor_com_au---anchorweld_ss1.asp 108-88-3
kevmor_com_au---anchorweld_uf1_data.asp N/A
kevmor_com_au---anchorweld_vy4_data.asp N/A
kevmor_com_au---anchorweld_vy9.asp N/A
kevmor_com_au---bostik_1492_tds.asp N/A
kevmor_com_au---carson_moulding_latex_msds.asp 7664-41-7
kevmor_com_au---chemwatch_msds_5041-48_granirapid_b.asp 61789-96-6 7732-18-5
kevmor_com_au---chemwatch_msds_5042-14_ultrabond_eco-300.asp 7732-18-5
kevmor_com_au---chemwatch_msds_5042-15_ultrabond_eco-800.asp 7732-18-5
kevmor_com_au---chemwatch_msds_5042-19_ultrabond_eco-185.asp 7732-18-5
kevmor_com_au---chemwatch_msds_5042-31_isolastic.asp 7732-18-5
kevmor_com_au---chemwatch_msds_5042-45_plano3.asp N/A
kevmor_com_au---chemwatch_msds_5044-28_kerapoxy_component_a.asp N/A
kevmor_com_au---chemwatch_msds_5044-52_triblock_component_a.asp N/A
kevmor_com_au---chemwatch_msds_5046-26_planicrete.asp 10043-52-4
kevmor_com_au---chemwatch_msds_5072-86_ultrabond_eco_90.asp N/A
kevmor_com_au---chemwatch_msds_6610-88.pdf_tixobond_fine_s_1_disc_2007.asp N/A
kevmor_com_au---eco350_td.asp N/A
kevmor_com_au---eco420_td.asp N/A
kevmor_com_au---eco840_td.asp N/A
kevmor_com_au---kerabond_plus_grey_chemwatch_msds_5128-29.asp N/A
kevmor_com_au---mapelastic_smart_a_5130-11_msds.asp N/A
kevmor_com_au---rla_6135_tds001.asp N/A
kevmor_com_au---rla_6345_tds001.asp N/A
kevmor_com_au---ultraplan_eco_msds.asp N/A
keystone-auto_com---msds-key747.asp 123-86-4 64742-95-6 95-63-6 4098-71-9 100-41-4 1330-20-7 822-06-0
keystone-auto_com---msds-key785.asp 110-43-0 123-86-4 64742-95-6 95-63-6 4098-71-9 100-41-4 1330-20-7 822-06-0
keystone-auto_com---msds-key801.asp 108-88-3 123-86-4 1330-20-7 108-65-6 100-41-4 822-06-0
keystone-auto_com---msds-key83.asp 763-69-9 123-86-4 108-88-3 78-93-3 64742-89-8 1330-20-7 100-41-4
keystone-auto_com---msds-key8883.asp 108-88-3 108-65-6 123-86-4 1330-20-7 100-41-4 822-06-0
keystone-auto_com---msds-key90.asp 64742-89-8 67-63-0 1330-20-7 67-56-1
keystone-auto_com---msds-key907.asp 74-98-6 106-97-8 108-88-3 100-41-4 01330-20-7 67-64-1 14807-96-6 1333-86-4
keystone-auto_com---msds-key92.asp 78-83-1 64742-89-8
keystone-auto_com---msds-key990.asp 108-88-3 67-64-1 115-10-6
keystone-auto_com---msds-key991.asp 108-88-3 67-64-1 115-10-6
khst_com_au---494_aerosol__all_purpose_spray_enamel_255gm-msds.asp 108-88-3 7429-90-5 68476-85-7
khst_com_au---a500._acetone-_msds.asp 67-64-1
khst_com_au---ab938ab958ab979ab994.asp 108-88-3 141-78-6 74-98-6 106-97-8
khst_com_au---adp1._plastic_adhesion_primer-_msds.asp 108-88-3
khst_com_au---ad_aerosol_k&h_disc_drum_caliper_400g-msds.asp 108-88-3 75-09-2 64742-95-6 74-98-6
khst_com_au---aerosol_k&h_chrome_metallic_finish400gaerosol-msds.asp 108-88-3 64742-95-6 74-98-6 106-97-8
khst_com_au---ae_aerosol_k&h_engine_enamel_400g-msds.asp 108-88-3 75-09-2 64742-95-6
khst_com_au---ah_aerosol_k&h_heat_proof_400g_-msds.asp 108-88-3 64-17-5 1330-20-7 68476-85-7
khst_com_au---arp1t.4.20._200_msds.asp 64742-89-8 108-88-3 8008-20-6 64742-93-4
khst_com_au---asp400._aerosol_spray_putty-_msds.asp 115-10-6 108-88-3 108-10-1 141-78-6 71-36-3 108-38-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC