K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H Chrome Metallic Finish,400g, Aerosol
STATEMENT OF HAZARDOUS NATURE
Hazardous according to criteria of Worksafe Australia
COMPANY DETAILS
Company: K & H Surface Technologies Pty Ltd.
ACN: 004 510 918
Address: 105 South Gippsland Highway, Dandenong, Victoria, and Australia 3195.
Telephone: (03) 9792 5927. Fax: (03) 9794 5633.
Emergency Telephone Number: Business hours (03) 9792 5927. After hours (03) 59742727 (not 24 hrs).
Ask for the Technical Manager.
IDENTIFICATION
PRODUCT NAME: K&H Chrome Metallic Finish, 400g,Aerosol
OTHER NAMES: K&H Brilliant Chrome, K&H Brilliant Gold
MANUFACTURER鈥橲 PRODUCT CODE: AF159, AF909.
UN NUMBER 1950
HAZCHEM CODE: 2Y
DANGEROUS GOODS CLASS/SUBSIDARY 2.1
RISK:
POISON SCHEDULE NUMBER: Not scheduled
Spray enamel for exterior and interior application
USE:
PHYSICAL DESCRIPTION/PROPERTIES
APPEARANCE Aerosol coloured spray
BOILING POINT: Not available
SPECIFIC GRAVITY: 0.89 appro.
FLASH POINT (掳 C): Not available
FLAMMABILITY LIMITS (%): Not established
SOLUBILITY IN WATER (g/L): Not available
None relevant
OTHER PROPERTIES:
INGREDIENTS
CHEMICAL ENTITY CAS No. PROPORTIONS
Toluene 108-88-3 10- <35%
Alkyd (Modified resin) 10- <30%
Pigment, coloured & inert to 10%
Aromatic Hydrocarbon 64742-95-6 to15%
Hydrocarbon Propellant (LPG) 30-60%
-Propane 74-98-6
-Butane 106-97-8
DATE OF ISSUE: 9th Sept.2003
MSDS NO:2003-1 LK PAGE 1 of 4
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H Chrome Metallic Finish,400g, Aerosol
HEALTH HAZARD INFORMATION
HEALTH EFFECTS
ACUTE
SWALLOWED Swallowing can result in nausea, vomiting and central nervous system
depression. If the victim is uncoordinated there is a greater likelihood of
vomit entering the lungs and causing subsequent complications.
EYE Avoid contact with eyes. Contact may irritate.
SKIN Avoid contact with skin. Contact may irritate.
INHALED Do not breathe gas/fumes/vapour/spray. Harmful by inhalation.
Breathing the vapour is dangerous.
CHRONIC Chronic exposure or intentional misuse by deliberately concentrating or
inhaling contents can be harmful or fatal. Possible risk of irreversible
effects. May cause cancer.
FIRST AID:
SWALLOWED Immediately rinse mouth out with water. Give a glass of water to drink.
Do not induce vomiting. Lean victim forward to reduce the risk of
aspiration. Never give drink to unconscious person. Seek medical advice.
For further advice call Poisons Information Centre.
EYE Hold eyes open & flood with water for at least 15 minutes. Seek
immediate medical advice.
SKIN Remove contaminated clothing and wash area with soap and water.
Remove contaminated clothing, soak in water, then launder before re-use
Seek medical aid if irritation occurs.
INHALED Remove person to fresh air. Lay patient down and keep warm. If
breathing is shallow, apply oxygen and seek medical aid.
FIRST AID FACILITIES Where bodily contact may occur, an eye wash station & safety shower or
supply of clean water should be readily available.
ADVICE TO DOCTOR No specific treatment. Treat symptomatically.
PRECAUTIONS FOR USE
EXPOSURE STANDARDS There is no established exposure limits for this product mixture.
ENGINEERING CONTROLS Ensure ventilation is adequate to maintain air concentrations below
exposure standards. While good natural ventilation is adequate in most
cases, local exhaust ventilation may be required. All electrical equipment
should conform to the requirements of AS3000.
PERSONAL PROTECTION
RESPIRATOR TYPE (AS 1716): Where ventilation is not adequate, respiratory protection may be
required. Respiratory protection should comply with AS1716 and be
selected in accordance with AS 1715.
DATE OF ISSUE: 9th Sept.2003
MSDS NO:2003-1 LK PAGE 2 of 4
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H Chrome Metallic Finish,400g, Aerosol
GLOVE TYPE: PVC gloves should be worn when handling. Hand protection should
comply with AS 2161
EYE PROTECTION: Full face shield, chemical goggles or safety glasses should be worn at all
times while handling. Eye protection should comply with AS 1337 and
be selected and used in accordance with AS 1336
CLOTHING: A PVC apron, rubber or PVC boots may be required for some activities
particularly where a risk of bodily contact is present
FLAMMABILITY
FIRE HAZARDS: Flammable liquid. May form flammable vapour mixtures with air. Fire
hazard when exposed to heat, spark or flame. Electrical equipment
should conform to the requirements of AS3000. Vapour may travel a
considerable distance to source of ignition and flash back.
SOURCES OF IGNITION ADVICE: Avoid all sources of ignition.
HAZCHEM CODE: 2Y
SAFE HANDLING INFORMATION
STORAGE AND TRANSPORT: Store in well ventilated area. Store away from oxidizing agents and
sources of heat and ignition. Keep containers closed at all times-check
regularly for leaks. Classified as Dangerous Goods Class 3 Flammable
Liquid by the criteria of the Australian Dangerous Goods Code (ADG
Code) for transport by road or rail.
SPILLS AND DISPOSAL: Wear personal protective clothing as recommended above. Remove all
ignition sources and ventilate area. Contain the spill with sand, earth or
inert material. Place in a suitable plastic container for waste disposal.
Dispose of in accordance with relevant local regulations. Do not empty
in drains.
UNUSUAL FIRE AND EXPLOSION Highly flammable liquid. On burning may emit toxic fumes. Heating can
HAZARDS cause expansion or decomposition leading to violent rupture of
containers.
LIST OF DANGEROUS COMPOSITION OR Products of combustion may contain oxides of carbon and toxic fumes.
COMBUSTION PRODUCTS
FIRE FIGHTING RECOMMENDATION Fight fires only from safe distance. Fire 鈥揻ighters and others exposed to
the products of combustion should wear self-contained breathing
apparatus. Prevent spillage from entering drains and watercourses.
TYPES OF EXTINGUISHER / FIRE Foam, dry agent (carbon dioxide, dry chemical powder)
FIGHTING AGENTS:
REACTIVITY: Reacts with oxidising agents.
OTHER INFORMATION
Acute Toxicity / Chronic Toxicity:
No LD50 data for available for product. The toxicity of the product may be attributed to the solvents it
contains. Additive effects may occur with mixtures of solvents. Similar effects can occur where the
consumption of alcohol is also involved.
DATE OF ISSUE: 9th Sept.2003
MSDS NO:2003-1 LK PAGE 3 of 4
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H Chrome Metallic Finish,400g, Aerosol
CONTACT POINT
Title: Technical Manager
Telephone Number: (03) 9792 5927 (Business hours 8-30 am-5.00pm Mon- Fri)
Emergency Telephone After hours (03) 59742727 (Not 24 hrs)
K&H pursues a policy of ongoing research & development aimed at product improvement and therefore may change the
formulation, specification & characteristics of the product without notice. It is user鈥檚 responsibility to verify the current
formulation, specification & characteristics of the product and to ascertain that it is suitable for an intended use or application.
All information contained in this Material Safety Data Sheet and the health, safety and environmental information are considered
to be accurate to the best of our knowledge as of the issue date specified above. However, no warranty or representation,
expressed or implied, is made as to the accuracy or completeness of the data and information contained in this data sheet.
Health and safety precautions and environmental advice noted in this data sheet may not be accurate for all individuals and/or
situations. It is the user鈥檚 obligation to evaluate and use this product safely and to comply with all applicable laws and regulations.
K&H Surface Technologies Pty Ltd accepts no responsibility for any injury, loss or damage, resulting from abnormal use of the
material, from any failure to adhere to recommendations, or from any hazards inherent in the nature of the material.
DATE OF ISSUE: 9th Sept.2003
MSDS NO:2003-1 LK PAGE 4 of 4
|