PRODUCT INFORMATION

                                                                                                             CODE: T6504, 08,16,

                                                                                                                   32

                                                       TITE-SEAL®

                                                  PLASTIC PIPE CLEANER

                                                                                                             PAGE: 1 of 1



                                                                                                             DATE: May 2008



FUNCTION AND APPLICATION: PLASTIC PIPE CLEANER is manufactured to remove grease, oil,

dirt, etc., from bonding surfaces of PVC and ABS pipe and fittings.



USE DIRECTIONS: This product is used just before applying cement to pipe and fittings. Pipe

already should have been cut square and deburred. 1) Wipe surfaces of pipe and fittings with a clean,

dry rag. Be sure to remove all dirt, oil, etc., before checking the fit. Apply TITE-SEAL® PLASTIC PIPE

CLEANER rapidly, making sure to cover all mating surfaces of both pipe and fitting. Avoid puddles

and excess. 2) Check fit of pipe and fitting as indicated on cement can. 3) Immediately apply cement

in accordance with instructions and assemble the joint.



PRECAUTIONS: Contains Acetone (CAS# 67-64-1), Methyl Ethyl Keytone (CAS# 78-93-3) and

Cyclohexanone (108-94-1). Extremely flammable. Eye and Skin irritant. Vapor harmful. Harmful if

swallowed. FIRST AID: In case of eye contact, flush repeatedly with water for at least 15 minutes

while lifting eyelids and get prompt medical attention. In case of skin contact, wash thoroughly with

soap and water. If irritation persists get prompt medical attention. If inhaled, move to fresh air

immediately. If breathing becomes difficult get prompt medical attention. If swallowed, DO NOT

INDUCE VOMITING. Call Poison Control Center, physician or hospital emergency room

immediately.



STORAGE & HANDLING: Store in a cool place below 1200F away from acids, ignition sources and

oxidizing agents. Keep container closed when not in use. Use with adequate ventilation. Avoid

prolonged breathing of vapor. Keep away from heat and open flame. Avoid contact with eyes and

skin. Wearing contact lenses while working with this product is inadvisable. Keep away from children.



DISPOSAL: Dispose of container, residue, and excess product in accordance with all federal, state,

and local laws and regulations.



CONTAINER DESCRIPTION: This product is available in a 4 fl.oz., 8 fl.oz., 16 fl.oz. and 32 fl. oz.

container.









                                           Radiator Specialty Company

                 600 RADIATOR ROAD, INDIAN TRAIL, NC 28079-5225 / 704-821-7643, 877-GO-4-GUNK

       NOTICE: WHILE THIS INFORMATION IS PRESENTED IN GOOD FAITH AND BELIEVED TO BE ACCURATE, RADIATOR SPECIALTY COMPANY DOES NOT GUARANTEE

    SATISFACTORY RESULTS FROM RELIANCE THEREON. THE DATA IS OFFERED SOLELY FOR YOUR INFORMATION AND RADIATOR SPECIALTY COMPANY DISCLAIMS ALL

      LIABILITY FOR ANY LOSS OR DAMAGE FROM ITS USE. THOROUGHLY TEST ANY APPLICATION ACCORDING TO THE PRODUCT DIRECTIONS AND INDEPENDENTLY

   CONCLUDE SATISFACTORY PERFORMANCE. NOTHING CONTAINED HEREIN IS TO BE CONSTRUED AS A RECOMMENDATION TO USE THE PRODUCT IN VIOLATION OF ANY

                                                                       PATENT.









© 2008 Radiator Specialty Company