PRODUCT INFORMATION

                                                                                                             CODE: TR1

                                                   TAR & BUG REMOVER

                                                                                                             PAGE: 1 of 1



                                                                                                             DATE: May 2008

FUNCTION AND APPLICATION: To remove road tars and bug debris/residue, which are not removed with

normal washing techniques.

OUTSTANDING PROPERTIES: Dissolves road tar, loosens bug deposits, and removes tree sap and other

stains from auto finishes and metal surfaces. Formulated to evaporate slowly and not run off. Available in

either aerosol or pour type can. Meets California VOC requirements.



USE DIRECTIONS: Caution: Do not use on hot painted surfaces while exposed to direct sunlight. Pre-test for

paint attack on small obscure area on new cars and freshly painted surfaces. Avoid prolonged contact with

rubber, plastic or asphalt. For tar: Coat dry surface to be cleaned. Wait 30 seconds. Wipe away tar with rag

soaked in remover. Repeat if necessary. For bugs: Same as for tar except use a rag soaked in water and

rinse with water after bug residue is loosened.



PRODUCT LIMITATIONS: Carefully pretest painted and plastic surfaces before use.



PRECAUTIONS: Contains Aliphatic Petroleum distillate (CAS# 8008-20-6), Naphthenic Petroleum distillate

and Ethoxylated Nonyl-Phenol (CAS# 9016-45-9). Aerosol package also contains Carbon Dioxide Propellant

(CAS# 124-38-9). Caution: Combustible. Contents under pressure (aerosol version). Vapor harmful. Harmful or

fatal if swallowed. Eye and skin irritant. FIRST AID: If inhaled, move to fresh air immediately. If breathing

becomes difficult, get prompt medical attention. If swallowed, DO NOT INDUCE VOMITING! Call Poison

Control, Physician, or Hospital Emergency Room Immediately. In case of eye contact, flush thoroughly with

water for 15 minutes while lifting eyelids and get prompt medical attention. For skin contact, wash thoroughly

with soap and water. If irritation persist, get prompt medical attention. Remove contaminated clothing and

launder before re-use.



STORAGE & HANDLING: Store in a cool, dry, well ventilated area. Do not puncture or incinerate container.

Do not expose to heat, sparks, open flames or temperatures above 120 F. Exposure to high temperatures may

cause bursting. Do not place on radiator, stove or in direct sunlight. Keep from contact with electrical

connections such as battery terminals. Use with adequate ventilation. Wearing contact lenses while working

with this product is inadvisable. Keep away from children.



DISPOSAL: Dispose of container, residue, and excess product in accordance with all federal, state, and local

laws and regulations.



CONTAINER DESCRIPTION: Packaged in 12-ounce weight aerosol and 16 fluid ounce container.



                                           Radiator Specialty Company

                  600 RADIATOR ROAD/ INDIAN TRAIL,NC 28079-5255 / 704-821-7643, 877-GO-4-GUNK

       NOTICE: WHILE THIS INFORMATION IS PRESENTED IN GOOD FAITH AND BELIEVED TO BE ACCURATE, RADIATOR SPECIALTY COMPANY DOES NOT GUARANTEE

    SATISFACTORY RESULTS FROM RELIANCE THEREON. THE DATA IS OFFERED SOLELY FOR YOUR INFORMATION AND RADIATOR SPECIALTY COMPANY DISCLAIMS ALL

      LIABILITY FOR ANY LOSS OR DAMAGE FROM ITS USE. THOROUGHLY TEST ANY APPLICATION ACCORDING TO THE PRODUCT DIRECTIONS AND INDEPENDENTLY

   CONCLUDE SATISFACTORY PERFORMANCE. NOTHING CONTAINED HEREIN IS TO BE CONSTRUED AS A RECOMMENDATION TO USE THE PRODUCT IN VIOLATION OF ANY

                                                                       PATENT.









© 2008 Radiator Specialty Company