PRODUCT INFORMATION

                                                                                                             CODE: T803V

                                                         BLACK

                                                                                                             PAGE: 1 of 1

                                                  SILICONE RTV SEALANT

                                                                                                             DATE: June 2008





FUNCTION AND APPLICATION: BLACK RTV SILICONE SEALANT is a room temperature vulcanizing

sealant for bonding, waterproofing and insulating most materials. Replaces any shape or size cork, asbestos,

felt, rubber, paper or metal gasket in minutes. Bonds to metal, plastics, glass, vinyl, rubber, leather, fabrics,

wood, tile and ceramics.



OUTSTANDING PROPERTIES: Meets the low volatility specifications for General Motors engines equipped

with oxygen sensors. This low volatile, pressure resistant material makes any size or shape gasket that will

resist temperatures of 6500 F.



USE DIRECTIONS: BLACK RTV SILICONE SEALANT cures in one hour, fully

cures in 24 hours. Surfaces to be sealed must be clean and thoroughly dry.

1) Remove cap and pierce tube seal with probe in top of cap. 2) Attach nozzle and cut a small portion of tip at

a 45 angle to test for proper bead. Repeat if necessary. 3) After application, allow 5 minutes for silicone to

"skin", then assemble parts. 4) After use, remove nozzle and replace cap to provide an airtight seal. 5) Excess

cured sealant may be trimmed with a razor blade.



PRODUCT LIMITATIONS: Not recommended for cylinder head gasketing or uses involving continuous contact

with gasoline or other solvents.



PRECAUTIONS: Contains Siloxanes and Silicones (CAS# 63148-62-9). Uncured sealant may irritate eyes and

skin. Harmful if swallowed. FIRST AID: In case of eye contact, flush with water for at least 15 minutes while

lifting eyelids and get prompt medical attention. For skin contact, wash with soap and water. If irritation

persists, get prompt medical attention. For inhalation: move to fresh air. If breathing becomes difficult, get

prompt medical attention. In case of ingestion, do not induce vomiting. Call Poison Control Center, Physician,

or Hospital Emergency Room immediately.



STORAGE & HANDLING: Store in a cool place below 1200F. away from acids, ignition sources and oxidizing

agents. Wearing contact lenses while working with this product is inadvisable. Keep away from children.



DISPOSAL: Dispose of container, residue, and excess product in accordance with all federal, state, and local

laws and regulations.



CONTAINER DESCRIPTION: Available in 3 oz tube packed in cardboard display.









                                           Radiator Specialty Company

                600 RADIATOR ROAD, INDIAN TRAIL, N.C. 28079-5225 / 704-821-7643. 877-GO-4-GUNK

       NOTICE: WHILE THIS INFORMATION IS PRESENTED IN GOOD FAITH AND BELIEVED TO BE ACCURATE, RADIATOR SPECIALTY COMPANY DOES NOT GUARANTEE

    SATISFACTORY RESULTS FROM RELIANCE THEREON. THE DATA IS OFFERED SOLELY FOR YOUR INFORMATION AND RADIATOR SPECIALTY COMPANY DISCLAIMS ALL

      LIABILITY FOR ANY LOSS OR DAMAGE FROM ITS USE. THOROUGHLY TEST ANY APPLICATION ACCORDING TO THE PRODUCT DIRECTIONS AND INDEPENDENTLY

   CONCLUDE SATISFACTORY PERFORMANCE. NOTHING CONTAINED HEREIN IS TO BE CONSTRUED AS A RECOMMENDATION TO USE THE PRODUCT IN VIOLATION OF ANY

                                                                       PATENT.









© 2008 Radiator Specialty Company