MATERIAL SAFETY DATA SHEET
Page: 1
DATE PREPARED: 10/07/1999
MSDS No: A405
Corrosion Inhibitor A405
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Identi炉er: Corrosion Inhibitor A405
Product Code: A405
Product Name: Corrosion Inhibitor A405
Generic Name: Rodine 102
MANUFACTURER: 24 HR. EMERGENCY TELEPHONE
HydroChem Industrial Services, Inc. NUMBERS:
900 Georgia Ave. Emergency Contact: HydroChem ER
Deer Park, TX 77536 Emergency Phone (800) 569-4889
Customer Service: (800) 934-9376
2. COMPOSITION/INFORMATION ON INGREDIENTS
wt.% CAS Registry #
Sodium Sulfate 50 { 80 07757-82-6
Polyvinylpyrrolidone 1 { 10 09003-39-8
Potassium Iodide 1 { 10 07681-11-0
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
IMMEDIATE CONCERNS:
No hazard in normal industrial use.
Dust may be slightly irritating to eyes and respiratory tracts.
4. FIRST AID MEASURES
EYES:
Immediately 掳ush eyes with water for 30 minutes while holding eyelids open. Seek medical at-
tention.
SKIN:
Wash thoroughly with soap and water. See a doctor if irritation occurs. Wash clothes thoroughly
before reusing.
INGESTION:
DO NOT induce vomiting. Drink large quantities of milk (preferred) or water. Take to hospital
at once.
Page: 2
DATE PREPARED: 10/07/1999
MSDS No: A405
Corrosion Inhibitor A405
INHALATION:
Remove to fresh air. See a doctor if e庐ects occur.
5. FIRE FIGHTING MEASURES
Flashpoint and Method: Not Applicable
Flammable Limits: Not Applicable
Autoignition Temperature: Not Determined
EXTINGUISHING MEDIA:
Use alcohol foam, carbon dioxide, dry chemical or water spray when 炉ghting 炉res involving this
material.
HAZARDOUS COMBUSTION PRODUCTS:
Iodine, Oxides of Sulfur and Carbon
FIRE FIGHTING EQUIPMENT:
As in any 炉re, wear self-contained breathing apparatus pressure-demand, (MSHA/NIOSH ap-
proved or equivalent) and full protective clothing to prevent contact with skin and eyes.
6. ACCIDENTAL RELEASE MEASURES
GENERAL PROCEDURES:
Sweep up and place in bag or other appropriate container.
Avoid raising dust.
Ventilate area and wash spill site after material pickup is complete.
7. HANDLING AND STORAGE
GENERAL PROCEDURES:
Refer to Section 8.
STORAGE:
No special precautions required.
Store away from oxidizers.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS:
Ventilation - General and local ventilation are required.
Page: 3
DATE PREPARED: 10/07/1999
MSDS No: A405
Corrosion Inhibitor A405
PERSONAL PROTECTION
EYES AND FACE:
Chemical goggles required and an eye wash in work area.
RESPIRATORY:
None normally needed. For protection from dust, use NIOSH approved respirator with dust
protection.
PROTECTIVE CLOTHING:
Clean body covering and chemical resistant gloves.
OTHER USE PRECAUTIONS:
Safety shower and eye wash in the work area.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Powder
Odor: Bland
Color: White
pH: Not Determined
Boiling Point: Not Determined
Melting Point: Not Determined
Solubility in Water: Soluble
Speci炉c Gravity: Not Determined
10. STABILITY AND REACTIVITY
STABLE: Yes
HAZARDOUS POLYMERIZATION: No
HAZARDOUS DECOMPOSITION:
Iodine, Oxides of Sulfur and Carbon
11. TOXICOLOGICAL INFORMATION
ACUTE
Eyes: Irritant. May cause pain, redness, discomfort.
Skin: No e庐ect expected. Prolonged or repeated contact may cause mild irritation.
Ingestion: No e庐ect expected. Swallowing large amounts may cause illness.
Inhalation: Irritant. May cause pain and coughing.
Page: 4
DATE PREPARED: 10/07/1999
MSDS No: A405
Corrosion Inhibitor A405
TARGET ORGANS:
Not Determined
GENERAL COMMENTS:
Carcinogens: Not listed by IARC, USA NTP, or USA OSHA.
COMMENTS:
Only selected Registry of Toxic E庐ects of Chemical Substances (RTECS) data is presented in this
document. See the actual entry in RTECS for complete information.
RTECS Number:
WE1650000 (sodium sulfate)
TR8370000 (polyvinylpyrrolinone)
TT2975000 (potassium iodode)
12. ECOLOGICAL INFORMATION
GENERAL COMMENTS:
No environmental data for this material are currently available.
13. DISPOSAL CONSIDERATIONS
PRODUCT DISPOSAL:
Dispose of in accordance with ALL applicable federal, state and local regulations.
EMPTY CONTAINER:
Send empty bags to sanitary land炉ll. Render other types of containers unuseable by puncturing
or crushing and sending to a sanitary land炉ll unless prohibited by local regulations.
RCRA/USEPA WASTE INFORMATION:
This material is not a RCRA regulated material.
COMMENTS:
Always follow ALL applicable federal, state and local regulations.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION)
Proper Shipping Name: Corrosion Inhibitor A405 { Not Regulated
Reportable Quantity (RQ) Under CERCLA: None
Placards: None
Label: None
Page: 5
DATE PREPARED: 10/07/1999
MSDS No: A405
Corrosion Inhibitor A405
15. REGULATORY INFORMATION
UNITED STATES
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT)
Title III Notes: This product contains no substances which are de炉ned as toxic chemicals under
the reporting requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 (40 CFR Part 372).
CERCLA (COMPREHENSIVE RESPONSE, COMPENSATION, AND LIABILITY ACT)
Reportable Spill Quantity: Not established
TSCA (TOXIC SUBSTANCE CONTROL ACT)
TSCA Status: All components of this material are on the TSCA inventory.
16. OTHER INFORMATION
Approved by: Charles M Maddin, PhD, FAIC
Approval date: 10/07/1999
REVISION SUMMARY
Revision #: 4
This MSDS replaces the August 17, 1998 MSDS. Any changes in information are as follows:
In Section 1
Date Prepared
NFPA CODES
Fire: 1 Health: 1 Reactivity: 0
HMIS CODES
Fire: 1 Health: 1 Reactivity: 0
MANUFACTURER DISCLAIMER:
[TM ] Indicates a trade or service mark of HydroChem Industrial Services, Inc.
The information herein is believed to be accurate and is presented in good faith; however, no
warranties or representations are made by HydroChem Industrial Services, Inc. regarding the
accuracy or completeness of the information.
HydroChem Industrial Services, Inc. shall not be held liable for any damage resulting from the
handling, or from contact with the above product.
|