LYSINE HYDROCHLORIDE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 12-May-2005 CHEMWATCH 4003-40
NC317TCP Version No:2.0
CD 2007/3 Page 1 of 9
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
LYSINE HYDROCHLORIDE
SYNONYMS
C6-H14-N2-O2.2HCl, H2N(CH2)4CH(NH2)CO2H.2HCl, "lysine dihydrochloride", "amino acid"
PRODUCT USE
Laboratory reagent. Used in biochemical research. Nutrient and dietary supplement. Soluble
and stable form of essential amino acid.
SUPPLIER
Company: Quantum Chemicals Pty Ltd
Address:
70 Quantum Close
Dandenong South
Victoria 3175
Telephone: 03 8795 8000
Emergency Tel: 1300 131 001
Fax: 03 8795 8099
HAZARD RATINGS
Flammability
Toxicity
Body Contact
Reactivity
Chronic
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4
Section 2 - HAZARDS IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE
NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. According to the Criteria of
NOHSC, and the ADG Code.
LYSINE HYDROCHLORIDE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 12-May-2005 CHEMWATCH 4003-40
NC317TCP Version No:2.0
CD 2007/3 Page 2 of 9
Section 2 - HAZARDS IDENTIFICATION
POISONS SCHEDULE
None
RISK SAFETY
None under normal operating conditions. None under normal operating conditions.
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
NAME CAS RN %
Lysine Hydrochloride 617-68-5 > 98
Section 4 - FIRST AID MEASURES
SWALLOWED
路 Immediately give a glass of water.
路 First aid is not generally required. If in doubt, contact a Poisons Information Centre
or a doctor.
EYE
If this product comes in contact with eyes:
路 Wash out immediately with water.
路 If irritation continues, seek medical attention.
路 Removal of contact lenses after an eye injury should only be undertaken by skilled
personnel.
SKIN
If skin contact occurs:
路 Immediately remove all contaminated clothing, including footwear.
路 Flush skin and hair with running water (and soap if available).
路 Seek medical attention in event of irritation.
INHALED
路 If dust is inhaled, remove from contaminated area.
路 Encourage patient to blow nose to ensure clear passage of breathing.
路 If irritation or discomfort persists seek medical attention.
NOTES TO PHYSICIAN
Treat symptomatically.
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
路 Water spray or fog.
路 Foam.
路 Dry chemical powder.
路 BCF (where regulations permit).
路 Carbon dioxide.
FIRE FIGHTING
路 Alert Fire Brigade and tell them location and nature of hazard.
路 Wear breathing apparatus plus protective gloves for fire only.
路 Prevent, by any means available, spillage from entering drains or water courses.
路 Use fire fighting procedures suitable for surrounding area.
路 DO NOT approach containers suspected to be hot.
LYSINE HYDROCHLORIDE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 12-May-2005 CHEMWATCH 4003-40
NC317TCP Version No:2.0
CD 2007/3 Page 3 of 9
Section 5 - FIRE FIGHTING MEASURES
路 Cool fire exposed containers with water spray from a protected location.
路 If safe to do so, remove containers from path of fire.
路 Equipment should be thoroughly decontaminated after use.
FIRE/EXPLOSION HAZARD
路 Solid which exhibits difficult combustion or is difficult to ignite.
路 Avoid generating dust, particularly clouds of dust in a confined or unventilated space
as dusts may form an explosive mixture with air, and any source of ignition, i.e.
flame or spark, will cause fire or explosion. Dust clouds generated by the fine
grinding of the solid are a particular hazard; accumulations of fine dust may burn
rapidly and fiercely if ignited.
路 Dry dust can also be charged electrostatically by turbulence, pneumatic transport,
pouring, in exhaust ducts and during transport.
路 Build-up of electrostatic charge may be prevented by bonding and grounding.
路 Powder handling equipment such as dust collectors, dryers and mills may require
additional protection measures such as explosion venting.
路 All movable parts coming in contact with this material should have a speed of less than
1-metre/sec.
Combustion products include: carbon dioxide (CO2), ammonia, hydrogen chloride and
nitrogen oxides (NOx).
FIRE INCOMPATIBILITY
Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine
bleaches, pool chlorine etc. as ignition may result.
HAZCHEM: None
Section 6 - ACCIDENTAL RELEASE MEASURES
EMERGENCY PROCEDURES
MINOR SPILLS
路 Clean up all spills immediately.
路 Avoid contact with skin and eyes.
路 Wear protective clothing, gloves, safety glasses and dust respirator.
路 Use dry clean up procedures and avoid generating dust.
路 Sweep up or
路 Vacuum up (consider explosion-proof machines designed to be grounded during storage and
use).
路 Place in clean drum then flush area with water.
MAJOR SPILLS
路 Clear area of personnel and move upwind.
路 Alert Fire Brigade and tell them location and nature of hazard.
路 Control personal contact by using protective equipment and dust respirator.
路 Prevent spillage from entering drains, sewers or water courses.
路 Avoid generating dust.
路 Sweep, shovel up. Recover product wherever possible.
路 Put residues in labelled plastic bags or other containers for disposal.
路 If contamination of drains or waterways occurs, advise emergency services.
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
LYSINE HYDROCHLORIDE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 12-May-2005 CHEMWATCH 4003-40
NC317TCP Version No:2.0
CD 2007/3 Page 4 of 9
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
路 Limit all unnecessary personal contact.
路 Wear protective clothing when risk of exposure occurs.
路 Use in a well-ventilated area.
路 When handling DO NOT eat, drink or smoke.
路 Always wash hands with soap and water after handling.
路 Avoid physical damage to containers.
路 Use good occupational work practice.
路 Observe manufacturer's storing and handling recommendations.
SUITABLE CONTAINER
Glass container.
Plastic container.
Multi-ply woven plastic or paper bag with sealed plastic liner
NOTE: Bags should be stacked, blocked, interlocked, and limited in height so that they
are stable and secure against sliding or collapse.
路 Check that containers are clearly labelled.
Packaging as recommended by manufacturer.
STORAGE INCOMPATIBILITY
Avoid reaction with oxidising agents.
STORAGE REQUIREMENTS
路 Store in original containers.
路 Keep containers securely sealed.
路 No smoking, naked lights or ignition sources.
路 Store in a cool, dry, well-ventilated area.
路 Store away from incompatible materials and foodstuff containers.
路 Protect containers against physical damage and check regularly for leaks.
路 Observe manufacturer's storing and handling recommendations.
_____________________________________________________
SAFE STORAGE WITH OTHER CLASSIFIED CHEMICALS
+ + + + + +
_____________________________________________________
+: May be stored together
O: May be stored together with specific preventions
X: Must not be stored together
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
Source Material TWA mg/m鲁
_________ _________ _____
Australia Exposure Standards Lysine Hydrochloride 10
(Inspirable dust (Not
specified))
LYSINE HYDROCHLORIDE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 12-May-2005 CHEMWATCH 4003-40
NC317TCP Version No:2.0
CD 2007/3 Page 5 of 9
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
MATERIAL DATA
These "dusts" have little adverse effect on the lungs and do not produce toxic effects or
organic disease. Although there is no dust which does not evoke some cellular response at
sufficiently high concentrations, the cellular response caused by P.N.O.C.s has the
following characteristics:
路 the architecture of the air spaces remain intact,
路 scar tissue (collagen) is not synthesised to any degree,
路 tissue reaction is potentially reversible.
Extensive concentrations of P.N.O.C.s may:
路 seriously reduce visibility,
路 cause unpleasant deposits in the eyes, ears and nasal passages,
路 contribute to skin or mucous membrane injury by chemical or mechanical action, per se,
or by the rigorous skin cleansing procedures necessary for their removal. [ACGIH]
This limit does not apply:
路 to brief exposures to higher concentrations
路 nor does it apply to those substances that may cause physiological impairment at lower
concentrations but for which a TLV has as yet to be determined.
This exposure standard applies to particles which
路 are insoluble or poorly soluble* in water or, preferably, in aqueous lung fluid (if
data is available) and
路 have a low toxicity (i.e.. are not cytotoxic, genotoxic, or otherwise chemically
reactive with lung tissue, and do not emit ionizing radiation, cause immune sensitization
, or cause toxic effects other than by inflammation or by a mechanism of lung overload).
PERSONAL PROTECTION
EYE
路 Safety glasses with side shields
路 Chemical goggles.
路 Contact lenses may pose a special hazard; soft contact lenses may absorb and
concentrate irritants. A written policy document, describing the wearing of lens or
restrictions on use, should be created for each workplace or task. This should include a
review of lens absorption and adsorption for the class of chemicals in use and an account
of injury experience. Medical and first-aid personnel should be trained in their removal
and suitable equipment should be readily available. In the event of chemical exposure,
begin eye irrigation immediately and remove contact lens as soon as practicable. Lens
should be removed at the first signs of eye redness or irritation - lens should be
removed in a clean environment only after workers have washed hands thoroughly. [CDC
NIOSH Current Intelligence Bulletin 59].
HANDS/FEET
Wear general protective gloves: i.e. Disposable polythene gloves or Cotton gloves or
Light weight rubber gloves, with Barrier cream preferably Safety footwear.
OTHER
路 Overalls.
路 Barrier cream
路 Eyewash unit.
RESPIRATOR
Protection Factor Half- Face Respirator Full- Face Respirator Powered Air Respirator
10 x ES P1 Air- line* -- PAPR- P1 -
LYSINE HYDROCHLORIDE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 12-May-2005 CHEMWATCH 4003-40
NC317TCP Version No:2.0
CD 2007/3 Page 6 of 9
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
50 x ES Air- line** P2 PAPR- P2
100 x ES - P3 -
Air- line* -
100+ x ES - Air- line** PAPR- P3
* - Negative pressure demand ** - Continuous flow.
The local concentration of material, quantity and conditions of use determine the type of
personal protective equipment required.
For further information consult site specific
CHEMWATCH data (if available), or your
Occupational Health and Safety Advisor.
ENGINEERING CONTROLS
General exhaust is adequate under normal operating conditions. If risk of overexposure
exists, wear SAA approved respirator. Correct fit is essential to obtain adequate
protection. Provide adequate ventilation in warehouse or closed storage areas. Air
contaminants generated in the workplace possess varying "escape" velocities which, in
turn, determine the "capture velocities" of fresh circulating air required to effectively
remove the contaminant.
Type of Contaminant: Air Speed:
solvent, vapours, degreasing etc., evaporating 0.25- 0.5 m/s (50- 100 f/min)
from tank (in still air)
aerosols, fumes from pouring operations, 0.5- 1 m/s (100- 200 f/min.)
intermittent container filling, low speed
conveyer transfers, welding, spray drift,
plating acid fumes, pickling (released at low
velocity into zone of active generation)
direct spray, spray painting in shallow booths, 1- 2.5 m/s (200- 500 f/min)
drum filling, conveyer loading, crusher dusts,
gas discharge (active generation into zone of
rapid air motion)
grinding, abrasive blasting, tumbling, high 2.5- 10 m/s (500- 2000 f/min.)
speed wheel generated dusts (released at high
initial velocity into zone of very high rapid
air motion).
Within each range the appropriate value depends on:
Lower end of the range Upper end of the range
1: Room air currents minimal or favourable to 1: Disturbing room air currents
capture
2: Contaminants of low toxicity or of nuisance 2: Contaminants of high toxicity
value only
3: Intermittent, low production. 3: High production, heavy use
4: Large hood or large air mass in motion 4: Small hood - local control only
Simple theory shows that air velocity falls rapidly with distance away from the opening
of a simple extraction pipe. Velocity generally decreases with the square of distance
from the extraction point (in simple cases). Therefore the air speed at the extraction
point should be adjusted, accordingly, after reference to distance from the contaminating
source. The air velocity at the extraction fan, for example, should be a minimum of 1-2
m/s (200-400 f/min.) for extraction of solvents generated in a tank 2 meters distant from
the extraction point. Other mechanical considerations, producing performance deficits
within the extraction apparatus, make it essential that theoretical air velocities are
LYSINE HYDROCHLORIDE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 12-May-2005 CHEMWATCH 4003-40
NC317TCP Version No:2.0
CD 2007/3 Page 7 of 9
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
multiplied by factors of 10 or more when extraction systems are installed or used.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
White crystalline powder; soluble in water. The naturally occuring form is L(+) lysine.
Synthetic lysine is DL form.
PHYSICAL PROPERTIES
Solid.
Mixes with water.
Molecular Weight: 219.11 Boiling Range (掳C): Not available
Melting Range (掳C): 202- 205 Specific Gravity (water=1): Not available.
Solubility in water (g/L): Miscible pH (as supplied): Not applicable
pH (1% solution): Not available. Vapour Pressure (kPa): Not applicable
Volatile Component (%vol): Not applicable Evaporation Rate: Not applicable
Relative Vapour Density (air=1): Not applicable Flash Point (掳C): Not applicable
Lower Explosive Limit (%): Not available. Upper Explosive Limit (%): Not available.
Autoignition Temp (掳C): Not available. Decomposition Temp (掳C): Not available.
State: Divided solid
Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
CONDITIONS CONTRIBUTING TO INSTABILITY
路 Presence of incompatible materials.
路 Product is considered stable.
路 Hazardous polymerisation will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH EFFECTS
SWALLOWED
The material may be mildly discomforting if swallowed in large quantity.
EYE
The dust may produce eye discomfort causing smarting, pain and redness.
SKIN
The material may be mildly discomforting to the skin.
Prolonged exposure may cause skin reactions.
INHALED
Not normally a hazard due to non-volatile nature of product.
The dust may be discomforting to the upper respiratory tract.
Persons with impaired respiratory function, airway diseases and conditions such as
emphysema or chronic bronchitis, may incur further disability if excessive concentrations
of particulate are inhaled.
LYSINE HYDROCHLORIDE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 12-May-2005 CHEMWATCH 4003-40
NC317TCP Version No:2.0
CD 2007/3 Page 8 of 9
Section 11 - TOXICOLOGICAL INFORMATION
CHRONIC HEALTH EFFECTS
Principal routes of exposure are by accidental skin and eye contact and inhalation of
generated dusts.
No human exposure data available. For this reason health effects described are based on
experience with chemically related materials.
As with any chemical product, contact with unprotected bare skin; inhalation of vapour,
mist or dust in work place atmosphere; or ingestion in any form, should be avoided by
observing good occupational work practice.
TOXICITY AND IRRITATION
No significant acute toxicological data identified in literature search.
Section 12 - ECOLOGICAL INFORMATION
No data for DL-lysine dihydrochloride.
Section 13 - DISPOSAL CONSIDERATIONS
路 Consult manufacturer for recycling options and recycle where possible .
路 Consult State Land Waste Management Authority for disposal.
路 Incinerate residue at an approved site.
路 Recycle containers if possible, or dispose of in an authorised landfill.
Section 14 - TRANSPORTATION INFORMATION
HAZCHEM: None
NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS:UN, IATA,
IMDG
Section 15 - REGULATORY INFORMATION
POISONS SCHEDULE: None
REGULATIONS
DL-lysine dihydrochloride (CAS: 617-68-5) is found on the following regulatory lists;
Australia - Australian Capital Territory - Environment Protection Regulation: Ambient environmental standards (Domestic water supply - inorganic chemicals)
Australia - Australian Capital Territory - Environment Protection Regulation: Pollutants entering waterways taken to cause environmental harm (IRRIG)
Australia - Australian Capital Territory Environment Protection Regulation Pollutants entering waterways - Agricultural uses (Stock)
Australia - Australian Capital Territory Environment Protection Regulation Pollutants entering waterways - Domestic water quality
Australia Exposure Standards
WHO Guidelines for Drinking-water Quality - Chemicals for which guideline values have not been established
Section 16 - OTHER INFORMATION
Classification of the preparation and its individual components has drawn on official and
authoritative sources as well as independent review by the Chemwatch Classification
committee using available literature references.
This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or
criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written permission
from CHEMWATCH. TEL (+61 3) 9572 4700.
LYSINE HYDROCHLORIDE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 12-May-2005 CHEMWATCH 4003-40
NC317TCP Version No:2.0
CD 2007/3 Page 9 of 9
Section 16 - OTHER INFORMATION
Issue Date: 12-May-2005
Print Date: 21-Dec-2007
|