MATERIAL SAFETY DATA SHEET
Sikament AFM
HMIS
HEALTH 1
FLAMMABILITY 0
REACTIVITY 0
D
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 08/29/2005
Product Name: Sikament AFM
CAS Number: Not Established
Chemical Family: Poly Carboxylate
MSDS Number: 3709
Product Code: P77754M
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
Aqueous Polymer Solution Mixture
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
May cause skin irritation.
Ingestion Hazards
May be harmful if swallowed.
Inhalation Hazards
May cause respiratory tract irritation.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Sikament AFM
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists. Wash clothing before reuse.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Extinguishing Media
Aqueous solution, will not support combustion. Use the appropriate extinguishing media for the surrounding fire.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained breathing
apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store in a cool, dry, well ventilated area. Keep containers tightly closed.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Eye/Face Protection
Faceshield over safety glasses or goggles.
.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In case of inadequate ventilation, use NIOSH-approved respirator.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
Sikament AFM
9. Physical And Chemical Properties
Appearance
Dark Green Liquid
Odor
Mild Aromatic Odor
Chemical Type: Mixture
Physical State: Liquid
Melting Point: N/AV 掳 F
Boiling Point: 212 掳 100 掳
F C
Specific Gravity: 1.03
Percent Volatiles: 84% (Water)
Packing Density: 8.4 lbs/gal
Vapor Pressure: N/AV
pH Factor: 4
Solubility: Completely in Water
Evaporation Rate: Slower Than Ether
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will Not Occur
Conditions To Avoid (Stability)
None Known
Incompatible Materials
None Known
Hazardous Decomposition Products
None Known
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Refer to applicable federal, state, and local regulations prior to disposition of container and residual contents. Waste
generators must determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the
classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local
hazardous waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not Regulated Under US D.O.T.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
Page 3 of 4
MATERIAL SAFETY DATA SHEET
Sikament AFM
15. Regulatory Information - Continued
SARA Hazard Classes
Acute Health Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
16. Other Information
HMIS Rating
Health: 1
F ir e : 0
Reactivity: 0
PP E: D
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 07/06/2005
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use in
combination with any other materialor in any process. The information set forth herein is based on technical data
that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we make no
warranties, express or implied andassume no liability in connection with any use of this information. Nothing herein
is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|