MATERIAL SAFETY DATA SHEET
Sikaflex庐 552
HMIS
HEALTH 2
FLAMMABILITY 1
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
30800 Stephenson Highway 30800 Stephenson Highway
Madison Heights, MI 48071 U.S.A. Madison Heights, MI 48071 U.S.A.
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikaindustry.com Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 06/18/2004
Product Name: Sikaflex庐 552
CAS Number: Not Established
Chemical Family: Filled, reactive PUR-Silane hydrid polymer
MSDS Number: 3237
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
SILANE-TERMINATED PREPLOYMER Trade Secret
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
May cause skin irritation.
Ingestion Hazards
May be harmful if swallowed.
Inhalation Hazards
Causes respiratory tract irritation.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Sikaflex庐 552
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Seek medical attention
immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention immediately.
5. Fire Fighting Measures
Flash Point: >212 掳F >96 掳C
Flash Point Method: TCC
Autoignition Point: N/AV 掳F
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate personal protective equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Ventilate enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep containers tightly closed. Keep out of reach of children. Not for internal consumption.
Storage Precautions
Store in a dry place.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
Sikaflex庐 552
8. Exposure Controls/Personal Protection - Continued
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use.
Other/General Protection
Wash thoroughly after handling.
9. Physical And Chemical Properties
Appearance
Paste (solid)
Odor
Odorless
Odor Threshold
Odorless
Chemical Type: Mixture
Physical State: Solid
Melting Point: N/AV 掳F
Specific Gravity: 1.45 kg / l
Percent VOCs: 1.34
Packing Density: 12.1 lb.s / gal
Vapor Pressure: N/AV
Solubility: Insoluble
VOC Content: 19.5 grams / liter
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None Known
Incompatible Materials
None Known
Hazardous Decomposition Products
CO, CO2
11. Toxicological Information
Miscellaneous Toxicological Information
This material releases trace levels of methanol (methyl alcohol) upon moisture curing (less than 1%). Upon
completion of the curing process, methanol will no longer be released. According to literature, methanol (CAS No
67-56-1) irritates mucus membranes, has skin drying and narcotic effects up to coma or death. Absorption by the
skin is possible.
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
Page 3 of 4
MATERIAL SAFETY DATA SHEET
Sikaflex庐 552
13. Disposal Considerations - Continued
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
16. Other Information
HMIS Rating
H eal th: 2
F i re : 1
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201 933 8800
This MSDS Supercedes A Previous MSDS Dated: 05/06/2004
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|