MATERIAL SAFETY DATA SHEET
SikaSense庐-4300 FD
HMIS
HEALTH 2
FLAMMABILITY 1
REACTIVITY 0
D
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Tivoli GmbH
30800 Stephenson Highway Reichsbahnstr. 99
Madison Heights, MI 48071 U.S.A. Hamburg D-22502 Germany
Company Contact: EHS Department Company Contact: Wolfgang Trenkner
Telephone Number: 201-933-8800 Telephone Number: 040 54002334
FAX Number: 201-933-9379 FAX Number: 040 54002588
Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 None Given
INTERNATIONAL: 703-527-3887
Issue Date: 05/03/2006
Product Name: SikaSense庐-4300 FD
CAS Number: Not Established
Chemical Family: Water based adhesive
MSDS Number: 3897
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
1-METHYL-2-PYRROLIDONE 872-50-4 0.1 - 1
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
May cause skin irritation. Prolonged or repeated skin contact with liquid may cause dermatitis.
Ingestion Hazards
May be harmful if swallowed.
Inhalation Hazards
Causes respiratory tract irritation.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
SikaSense庐-4300 FD
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. If victim is fully conscious,
give one or two cups of water to drink. Never give anything by mouth to an unconscious victim. Seek medical
attention immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration and seek medical attention immediately.
5. Fire Fighting Measures
Flash Point: >200 掳F
Autoignition Point: N/AV 掳F
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Fire And Explosion Hazards
During a fire, irritating and/or toxic gases and aerosols from teh decomposition/combustion products may be
present.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep containers tightly closed. Keep out of reach of children.
Handling Precautions
Protect from frost.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
SikaSense庐-4300 FD
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use.
9. Physical And Chemical Properties
Appearance
White Liquid
Odor
Acrylic
Chemical Type: Mixture
Physical State: Liquid
Melting Point: 32 掳F
Boiling Point: 212 掳F
Specific Gravity: 1 g/mL
Percent Volatiles: 40-80%
Vapor Pressure: 17mm at 20C
Solubility: Fully Miscible
Evaporation Rate: <1 (water)
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None Known
Incompatible Materials
None Known
Hazardous Decomposition Products
carbon oxides acrylic monomer
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
Page 3 of 5
MATERIAL SAFETY DATA SHEET
SikaSense庐-4300 FD
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
1-METHYL-2-PYRROLIDONE (872-50-4) 0.1 - 1 %
This information must be included on all MSDSs that are copied and distributed for this material.
Ingredient(s) - U.S. Regulatory Information
1-METHYL-2-PYRROLIDONE
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
SARA - Fire Hazard
State Regulations
WARNING: This product contains a chemical known to the State of California to cause birth defects or other
reproductive harm.
Ingredient(s) - State Regulations
1-METHYL-2-PYRROLIDONE
New Jersey - Environmental Hazard
Pennsylvania - Workplace Hazard
California - Proposition 65
Massachusetts - Hazardous Substance
16. Other Information
HMIS Rating
H eal th: 2
F i re : 1
Reactivity: 0
PP E: D
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 04/30/2004
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
Page 4 of 5
MATERIAL SAFETY DATA SHEET
SikaSense庐-4300 FD
Disclaimer - Continued
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|