MATERIAL SAFETY DATA SHEET
Sika Aktivator UH-2 LUM
HMIS
HEALTH *2
FLAMMABILITY 3
REACTIVITY 1
D
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Automotive Sika Automotive
30,800 Stephenson Highway 30,800 Stephenson Highway
Madison Heights, MI 48071 Madison Heights, MI 48071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sika-automotive.com Web Site: www.sika-automotive.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 06/02/2005
Product Name: Sika Aktivator UH-2 LUM
CAS Number: Not Established
Chemical Family: Bonding agent containing solvent
MSDS Number: 3624
Product Code: 060U540
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
METHYL ACETATE 79-20-9
TRADE SECRET TSRN#02944800-5288P Trade Secret
TRADE SECRET TSRN#02944800-5289P Trade Secret
3. Hazards Identification
Eye Hazards
Cause eye irritation. A severe irritant to the eyes from liquid splashes.
Skin Hazards
Causes skin irritation.
Ingestion Hazards
Harmful if swallowed. Aspiration into lungs can produce severe lung damage and is a medical emergency.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Aktivator UH-2 LUM
3. Hazards Identification - Continued
Inhalation Hazards
May cause nose, throat, and lung irritation. May cause effects such as drowsiness, dizziness, decrease in motor
functions, narcosis or other central nervous system effects.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Seek medical attention
immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration. Call a physician or a poison control center
immediately.
5. Fire Fighting Measures
Flash Point: 9 掳F -13 掳C
Autoignition Point: 936 掳F 501 掳C
Lower Explosive Limit: 3.1
Upper Explosive Limit: 16
Fire And Explosion Hazards
Protect against electrostatic charge. Possible formation of explosive mixtures air/vapor. Above flash point,
vapor-air mixtures are explosive within flammable limits noted above. Vapors may flow along surfaces to distant
ignition sources and flash back. Sealed containers may rupture when heated.
Extinguishing Media
In case of fire, use dry chemical, alcohol foam or carbon dioxide. Water may be ineffective. Water spray may be
used to keep fire exposed container. Water may be used to flush spills away from exposures and to dilute spills
to non-flammable mixtures.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Extinguish all sources of ignition. Use appropriate personal protective equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Ventilate enclosed area. Keep spills away from sewers and
open bodies of water.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store in a cool, dry, well ventilated area. Keep containers tightly closed. Not for
internal consumption.
Handling Precautions
Keep away from sources of ignition. Vapors may form an explosive mixture with air. Take precautionary
measures against electrostatic loading.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Aktivator UH-2 LUM
7. Handling And Storage - Continued
Storage Precautions
Store containers tightly sealed and moisture-proof in a cool, dry, well ventilated area. Take precautionary
measures against electro static charge. Containers should be bonded and grounded for transfers to avoid static.
Keep away from heat, sparks, flame, and other sources of ignition (i.e., pilot lights, electric motors and static
electricity). Containers of this material may be hazardous when empty since they retain product residues (vapors,
liquid); observe all warnings and precautions for the product.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use of a system of local and/or general exhaust is recommended to keep employee below applicable expsoure
limits. Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by
the American Conference of Governmental Industrial Hygienists for information on the design, installation, use,
and maintenance of exhaust systems.
Eye/Face Protection
Faceshield over safety glasses or goggles where splashing is possible.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Expsosure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General Protection
Wash thoroughly after handling.
Ingredient(s) - Exposure Limits
METHYL ACETATE
ACGIH TLV-STEL 250 ppm
ACGIH TLV-TWA 200 ppm
OSHA PEL-TWA 200 ppm
9. Physical And Chemical Properties
Appearance
Colorless Liquid
Odor
Pleasant
Chemical Type: Mixture
Physical State: Liquid
Melting Point: N/AV 掳F
Boiling Point: 132 掳F 55.8 掳C
Specific Gravity: 0.94 grams / cm3
Percent VOCs: < 2.0 % ^
Packing Density: N/AV
Vapor Pressure: 178.3 mmHg @ 20C, 94.4 KPa@ 55C
Vapor Density: 2.6
Viscosity: 1MPa*S @ 20C
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Aktivator UH-2 LUM
9. Physical And Chemical Properties - Continued
Odor - Continued
VOC Content: < 18.8 grams / liter ^
^ Note: VOC calculations exclude exempt compounds per 40 CFR 51.100(s)
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Heat, flames, ignition sources and incompatibles.
Incompatible Materials
Nitrates, strong oxidizers, alkalis, and acids. Reacts slowly with water to form acetic acid and methanol.
Hazardous Decomposition Products
Combustion products include fumes, smoke, Carbon Monoxide, and Carbon Dioxide.
Conditions To Avoid (Polymerization)
None Known
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
RCRA Information
Waste solutions may meet the RCRA Ignitable characteristic.
14. Transport Information
Proper Shipping Name
Methyl Acetate Solution
Hazard Class
3, PG. II
DOT Identification Number
UN1231
DOT Shipping Label
Flammable
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Aktivator UH-2 LUM
15. Regulatory Information - Continued
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
Fire Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
Ingredient(s) - State Regulations
METHYL ACETATE
New Jersey - Workplace Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
16. Other Information
HMIS Rating
Health: *2
F i re : 3
Reactivity: 1
PP E: D
Revision/Preparer Information
MSDS Preparer: EHS Department
This MSDS Supercedes A Previous MSDS Dated: 06/10/2004
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Automotive
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|