MATERIAL SAFETY DATA SHEET
SikaSense庐 4300FD CA
HMIS
HEALTH 2
FLAMMABILITY 1
REACTIVITY 0
D
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Canada Inc.
30800 Stephenson Highway 601, Avenue Delmar
Madison Heights, MI 48071 U.S.A. Pointe Claire, QC H9R 4A9 Canada
Company Contact: EHS Department Company Contact: Steve Gosselin
Telephone Number: 201-933-8800 Telephone Number: 514-697-2610
FAX Number: 201-933-9379
Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CANUTEC: 613-996-6666
INTERNATIONAL: 703-527-3887
Issue Date: 05/03/2006
Product Name: SikaSense庐 4300FD CA
CAS Number: Not Established
Chemical Family: Water based adhesive
MSDS Number: 3898
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
POLYURETHANE DISPERSION Mixture
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
May cause skin irritation.
Ingestion Hazards
May be harmful if swallowed.
Inhalation Hazards
Causes respiratory tract irritation.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
SikaSense庐 4300FD CA
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. If victim is fully conscious,
give one or two cups of water to drink. Never give anything by mouth to an unconscious victim. Seek medical
attention immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration and seek medical attention immediately.
5. Fire Fighting Measures
Flash Point: >200 掳F
Autoignition Point: N/AV 掳F
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Fire And Explosion Hazards
During a fire, irritating and/or toxic gases and aerosols from teh decomposition/combustion products may be
present.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep containers tightly closed. Keep out of reach of children.
Handling Precautions
Protect from frost.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
SikaSense庐 4300FD CA
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use.
9. Physical And Chemical Properties
Appearance
White Liquid
Odor
Acrylic
Odor Threshold
Acrylic Odor
Chemical Type: Mixture
Physical State: Liquid
Melting Point: 32 掳F 0 掳C
Boiling Point: 212 掳F 100 掳C
Specific Gravity: 1 g/mL
Percent Volatiles: 40-80%
Vapor Pressure: 17mm at 20C
Vapor Density: < 1 (water)
pH Factor: 8-10
Solubility: Fully Miscible
Evaporation Rate: <1 (water)
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None Known
Incompatible Materials
None Known
Hazardous Decomposition Products
carbon oxides acrylic monomer
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
Page 3 of 4
MATERIAL SAFETY DATA SHEET
SikaSense庐 4300FD CA
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
State Regulations
WARNING: This product contains a chemical known to the State of California to cause birth defects or other
reproductive harm.
16. Other Information
HMIS Rating
H eal th: 2
F i re : 1
Reactivity: 0
PP E: D
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 06/22/2005
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|