MATERIAL SAFETY DATA SHEET
Sika Remover 208
HMIS
HEALTH 2
FLAMMABILITY 3
REACTIVITY 0
H
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Schweiz AG
201 Polito Ave Tuffenwies 16
Lyndhurst, NJ 07071 Zurich, Schweiz CH-8048 Switzerland
Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: +41 44 436 40 40
FAX Number: 201-933-9379 FAX Number: +41 44 436 47 36
Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 Out of office hours only: +41 (0) 79 309 06 29
INTERNATIONAL: 703-527-3887
Issue Date: 11/15/2007
Product Name: Sika Remover 208
CAS Number: Not Established
MSDS Number: 4217
Product Code: I2081000
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
NAPHTHA (PETROLEUM), HYDROTREATED HEAVY 64742-48-9
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
May cause skin irritation. Prolonged and/or repeated skin contact may cause an allergic reaction/sensitization.
Ingestion Hazards
Harmful if swallowed. May cause lung damage if swallowed.
Inhalation Hazards
May cause nose, throat, and lung irritation. Breathing in large amounts may cause cantral nervous system effects
(dizziness, drowsiness, weakness, fatigue, nausea, headache, unconsciousness).
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Remover 208
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Flash Point: >75.2 掳F >24 掳C
Fire And Explosion Hazards
Flammable liquid and vapor. Protect against electrostatic charge. Possible formation of explosive mixtures
air/vapor. Above flash point, vapor-air mixtures are explosive within flammable limits notes above. Vapors may
flow along surfaces to distant ignition sources and flash back. Sealed containers may rupture when heated.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Eliminate all ignition sources. Use appropriate Personal Protective Equipment (PPE). Absorb and/or contain spill with
inert materials (e.g. sand, vermiculite) and then place in appropriate container. For large spills, use water spray to
disperse vapors. Prevent runoff from entering waterways or sewers.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store in a cool, dry, well ventilated area. Keep containers tightly closed.
Handling Precautions
Keep away from heat, sparks, flame, and other sources of ignition (i.e., pilot lights, electric motors, and static
electricity).
Storage Precautions
Keep away from heat, sparks, flame, and other sources of ignition (i.e., pilot lights, electric motors and static
electricity). Store in a cool, dry, well-ventilated area.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use of a system of local and/or general exhaust is recommended to keep employee below applicable expsoure
limits. Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by
the American Conference of Governmental Industrial Hygienists for information on the design, installation, use,
and maintenance of exhaust systems.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Remover 208
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Avoid skin contact. Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long
sleeve shirt and long pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Expsosure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General Protection
Wash thoroughly after handling.
9. Physical And Chemical Properties
Appearance
Clear liquid
Odor
Hydrocarbon
Chemical Type: Mixture
Physical State: Liquid
Specific Gravity: 0.76
Solubility: Insoluble in water
Viscosity: Kinematic (40 C): <6.9 cSt
10. Stability And Reactivity
Stability: STABLE
Hazardous Polymerization: WILL NOT OCCUR
Incompatible Materials
Oxidizing materials
Conditions To Avoid (Polymerization)
None known
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
RCRA Information
Waste solutions may meet the RCRA Ignitable characteristic.
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Remover 208
14. Transport Information
Proper Shipping Name
Hydrocarbons, liquid, n.o.s. (Isononane / N-Nonane)
Hazard Class
3
DOT Identification Number
UN3295
DOT Shipping Label
Flammable
Freight Class
PG III
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Fire Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
16. Other Information
HMIS Rating
H eal th: 2
F i re : 3
Reactivity: 0
PP E: H
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 06/13/2007
Disclaimer
The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")
product identified and described herein. This information is not intended to address, nor does it address the use
or application of the identified Sika product in combination with any other material, product or process. All of the
information set forth herein is based on technical data regarding the identified product that Sika believes to be
reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the
warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data
Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this
MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Remover 208
Disclaimer - Continued
OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or
201-933-8800.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|